inPlace 9605018E Cool Grey Picture Ledge MDF Floating Wall Shelf Installation Guide
- June 4, 2024
- inPlace
Table of Contents
inPlace 9605018E Cool Grey Picture Ledge MDF Floating Wall Shelf
Suggested Tools
this kit includes
- picture ledge (2/3) screws
- drywall anchors (2/3) screw hole stick-
Hold the picture ledge against the wall in the desired position. Use level to
ensure alignment, and mark holes with a pencil where holes to wall.
Note: Failure to install the shelf into at least 1 stud will result in
improper installation and will greatly affect weight load capacity. If you are
drilling into a wall where no studs are available, use the proper anchors to
mount the bracket. Anchors have been provided for this purpose.
Installation
-
Hold the picture ledge against the wall in the desired position. Use a level to ensure alignment, and mark holes with a pencil where holes in the shelf meet the wall. { 1) Screw must go into a wall stud, and all others use drywall anchors to keep shelf securely fastened
to wall.
Note: Failure to install the shelf into at least 1 stud will result in improper installation and will greatly affect weight load capacity.
If you are drilling into a wall where no studs are available, use the proper anchors to mount the bracket. Anchors have been
provided for this purpose. -
To set drywall anchors {skip if wall mark is lined up with stud) drill hole into wall marks with a power drill and 3/32″ drill bit.
Using a power drill for a Phillips’s head screwdriver, screw the drywall anchors into the newly created holes. -
If the wall mark does not line up with a stud, use Phillip’s head screwdriver to drive the provided screws into the drywall anchors.
Screw through the front of the cube, securing the shelf to the wall. If the wall mark lines up with a stud, use the power drill to drive the provided screws directly into the studs securing the shelf into place. One the shelf is secured to the wall, place the provided stickers over each screw head to hide the screw heads.
This shelf system must be installed in studs for maximum stability and load capacity.
For assistance with installation or missing parts, please call
1-800-860-1677
CustomerService@lewishymaninc.com
IMPORTANT HEALTH NOTICE
SOME OF THE BUILDING MATERIALS USED IN THIS HOME (OR THESE BUILDING MATERIALS) EMIT FORMALDEHYDE. EYE, NOSE, AND THROAT IRRITATION, HEADACHE, NAUSEA, AND A VARIETY OF ASTHMA-LIKE SYMPTOMS, INCLUDING SHORTNESS OF BREATH, HAVE BEEN REPORTED AS A RESULT OF FORMALDEHYDE EXPOSURE. ELDERLY PERSONS AND YOUNG CHILDREN, AS WELL AS ANYONE WITH A HISTORY OF ASTHMA, ALLERGIES, OR LUNG PROBLEMS, MAY BE AT GREATER RISK. RESEARCH IS CONTINUING ON THE POSSIBLE LONG- TERM EFFECTS OF EXPOSURE TO FORMALDEHYDE.
REDUCED VENTILATION MAY ALLOW FORMALDEHYDE AND OTHER CONTAINMENTS TO
ACCUMULATE IN THE IND0OR AIR. HIGH INDoOR TEMPERATURES AND HUMIDITY RAISE
FORMALDEHYDE LEVELS. WHEN A HOME IS TO BE LOCATED IN THE AREAS SUBJECT TO
EXTREME SUMMER TEMPERATURES, AN AIR-CONDITIONING SYSTEM CAN BE USED TO CONTROL
INDOOR TEMPERATURE LEVELS. OTHER MEANS OF CONTROLLED MECHANICAL VENTILATION
CAN BE USED TO REDUCE LEVELS OF FORMALDEHYDE AND OTHER INDOOR AIR
CONTAINMENTS.
IF YOU HAVE ANY QUESTIONS REGARDING THE HEALTH EFFECTS OF FORMALDEHYDE,
CONSULT YOUR DoCTOR OR LOCAL HEALTH DEPARTMENT.”
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>