WOWME KW66 Smartwatch User Manual

KW66 Smartwatch
User Manual

KW66 Smartwatch

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53,
Holešovice, 170 00 Praha 7, www.alza.cz

Product introduction

Wearing
Wear the wristband about one finger away from the wrist bone and adjust the tightness of the wristband to a comfortable position. Tip: If you wear the strap too loose, the data acquisition of heart rate sensor may be affected.

Connection and binding

1. Scan the QR code on the watch display (Settings-APP Download) by your mobile phone,and then install the APP Glory Fit. You can also scan the QR code below to download and instar Glory Fit from the mobile APP store.
   https://app.help-document.com/gloryfit/download/index.html

2. After installing the APP open and log in Glory Fit , then select (device KW66_ to be added) on the device page so as to connect it.
   

Tips:

1. In the process of pairing, check if the Bluetooth function on your mobile phone is enabled, so that the watch can be connected to your mobile phone.
2. lf the device cannot be found in the pairing process, or the device cannot be connected during use, please click “Settings – Reset” on the watch, then try to start the pairing again.
3. lf the watch still cannot be found, please exit and re-open the APP.
4. The connection status of the watch is as shown in the figures below:
   

Note: The battery power will be shown as 5 different levels on the watch (0%-25%-50%-75%100%).

Operation

1. Open the control panel: Swipe the screen on the main interface downwards from the top
2. Open the messages/notifications: Swipe the screen on the main interface upwards from the bottom
3. Open the main menu: Swipe the screen on the main interface from left to right (Note: On other interfaces, slide your finger from left to right to return to the previous interface)
4. Open the status interface: Swipe the screen on the main interface from right to left
5. Quick dial change: Press and hold the dial interface for 3 seconds, and the watch vibrates once; then you can slide your finger to left or right to select the dial.
6. Power on: Press and hold the Power button for 5 seconds to switch it on (Power off: You need to press and hold the button for 3 seconds when the display is on to select whether to power off)
7. Quick sports pause/continue: Press the power button.
8. Press the power button to return to the homepage (Note: If you are on the level 2 interface, you will return to the level 1 interface).

Features

13 sport modes (Running, Walking, Cycling, Alpinism, Yoga, Skipping, Tennis, Baseball, Basketball, Badminton, Football, Rugby, Table Tennis)

In running, walking, Alpinism and other sports modes, you can click the screen to view the sports data (steps, pace, calories, distance and duration).

Heart Rate Monitor: The watch will continuously track your heart rate for 24 hours(Need to turn on the “Heart rate monitoring” in the APP at first), you can also view the historical heart rate data int he APP. Note: When this feature is enabled, the power consumption will be increased, and the battery endurance will be reduced. Blood Oxygen Function: The watch can track oxygen in your blood.

Status Interface: The steps, distance and calories will be recorded detail and displayed on watch everyday.

Sleep: The watch will monitor your sleep status from 6:00pm to the 11:59 am of the next day.

Music: The watch can be used to control the music player of the mobile phone, you can use it to play/pause or skip songs (it is only compatible with the inbuilt music player of the mobile phone, may not be compatible with third party’ s player, and the volume cannot be adjusted on the watch)

The watch will receive and display texts/messages/ social media notifications from your phone.

Setting: You can shut down or reset the watch from setting, and you can also check the info about the watch and App download QR code.

Charging

1. Place the watch on the magnetic charger, please make sure the charging contacts on the back of the watch are fully adsorbed the metal contacts of the charger. It can be fully charged within about 3.5 hours.
2. Plug the charging cable into a standard USB charger purchased via official channels. The output voltage is 5V and the output current is 1A.
   If the watch cannot be turned on after being out of use for a long time, please wipe the charging contacts of the charging cable when using it again to remove the sweat or moisture residue.
   Note: (If you do not use the watch often, please charge it once every month.)

Basic parameters

Standby time>30 days
Service time: 7 days (with all features on)
Button Power| button on side
Charging mode| Magnetic charging
Water-proofing| IP68 waterproof level
Heart Rate Sensor| VC32S

Frequently Asked Questions

The watch cannot be connected to the APP.(Or the watch can’t be found by the APP)

– 1.Please make sure the software version of your smart phone is over Android 4.4 Or iOS 7.0.
Please check whether the watch was connected to another phone or not, if yes please unbind it at first.
Please make sure you have enabled the Bluetooth function of your phone. (If it’s still not working, we recommend you to exit all of other APP and reopen the Bluetooth function)
lf the watch still can’t be connected even after trying the above steps, please exit the Glory Fit APP and restart the mobile phone and the watch.
  *Note :Some smart phones will not be connected to the watch in low battery mode.

Can’t get any text/message on the watch

– 1.First, please make sure the Bluetooth function is enabled on your mobile phone, and check whether the watch is connected successfully with your phone through the Glory Fit APP Then turn on the “Notifications reminders” in the APP.
Then please check whether you give this APP the permission to keep running in the background on your mobile phone. If not, please allow it to keep running in the background.
And also check if the message can show up on your phone’s notification bar or not. If not, please allow the APP notifications to pop-up in the notification bar in the system setting: Setting- Notifications- Notification style-Tick the “Banners”.
lf the messages can still not be displayed on the watch even after trying the above steps, please exit the Glory Fit APP and restart the mobile phone and the watch.

How to synchronize the watch data to my phone?

– Auto synchronization: When the watch is connected to the APP, it will automatically synchronize data.
2. Manual synchronization: After the watch is connected to the APP successfully, you can manually synchronize the data by swiping down the screen from the APP homepage or data interface.
3. lf the data cannot be synchronized, please try to disable and enable the Bluetooth function again on your mobile phone or restart your mobile phone.

(Note: In case of any common problems in operation, please refer to the Common problem in My profile of the APP, which can help you solve some problems) As shown in the figure below:

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity
We declare on our own responsibility that this product complies with the provisions of Directives 2014/53/EU and 2011/65/EU including amendments 2015/863/EU.

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.hu – Kényelmes és biztonságos vásárlás | alza.hu
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>