Rockford Fosgate RGB-Y6P M1 Speakers Installation Guide
- June 16, 2024
- Rockford Fosgate
Table of Contents
RGB-Y6P M1 Speakers
INSTALLATION ADVISORY
REQUIRED GEN-2 COLOR OPTIX™ CABLES
WHEN INSTALLLING M1 & M2 SPEAKERS
CABLES NEEDED FOR EACH SPEAKER INSTALLED
CABLE| M1 & M2
SPEAKERS / SUBWOOFERS| M1 & M2
MOTO-CANS| M2
WAKE-CANS
---|---|---|---
RGB-6 / RGB-16 / RGB-25| | |
RGB-Y4P| | |
RGB-Y6P| | |
MODELS COVERED:
- RGB-6: 6 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-16: 16 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-25: 25 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-Y4P: 4-Pin Color Optix™ Y-Adaptor for PMX-RGB
- RGB-Y6P: 6-Pin Color Optix™ Y-Adaptor for PMX-RGB
INSTALLATION ADVISORY:
New Gen-2 Color Optix™ cables require different configurations required to
connect Color Optix™ compatible speakers to the PMX-RGB controller.
Please refer to the table and diagrams for proper cable configurations.
NOTE: The PMX-RGB is designed to accommodate 8 speakers/subwoofers for
ideal illumination.
A maximum capacity of 16 speakers and/or subwoofers on 100-ft (30.48 m) of
total cable length can be accomplished. Slight LED dimming may occur at the
end of the string.
M1 & M2 SPEAKERS & SUBWOOFERS
COLOR OPTIX™ CABLES REQUIRED
M1 & M2 MOTO – CANS
COLOR OPTIX™ CABLES REQUIRED
M2 WAKE- CANS
COLOR OPTIX™ CABLES REQUIRED
Documents / Resources
|
Rockford Fosgate RGB-Y6P M1
Speakers
[pdf] Installation Guide
RGB-Y6P M1 Speakers, RGB-Y6P, M1 Speakers, Speakers
---|---