KRAUSE 011647 Multi Purpose Combination Ladder User Manual

KRAUSE 011647 Multi-Purpose Combination Ladder User Manual

Product Specifications

• Model: Multipurpose/Combination Ladder
• Weight Capacity: 150 kg
• Material: Aluminum

Dimensions

INSTRUMENTS

Product Usage Instructions

Assembly

1. Ensure all parts are included in the package.
2. Follow the assembly instructions provided in the manual.
3. Secure all connections properly before use.

Extension and Adjustment

1. To extend the ladder, follow the extension mechanism
   instructions.

2. Adjust the ladder height as needed for different tasks.

3. Always lock the ladder securely in place before climbing.

Safe Usage

1. Place the ladder on a flat, stable surface.
2. Avoid overreaching while on the ladder.
3. Do not exceed the weight capacity indicated.

Introduction

This User Manual contains important safety information regarding the use of this multi-purpose/combination ladder, which is suitable for use as a stepladder and leaning ladder. Please read this manual carefully before using the ladder and keep it safe for future reference. Always include this user and operating guide when handing the ladder over to a new owner.

Intended use

This ladder is a mobile piece of equipment that can be used in different locations. It is designed for performing small-scale jobs at heights that would make the use of other types of equipment inappropriate (see the German Ordinance on Industrial Safety and Health). This ladder must only be used as described in this User Manual. All other uses are regarded as inappropriate use. We do not accept any liability for damage arising from the inappropriate use of the ladder. Any changes made to the ladder without the manufacturer‘s authorization will void the warranty.

Technical information

illustration of the multipurpose ladder in different configurations and a list of components. The technical information specific to this ladder is affixed to the ladder itself. Please refer to the table for more information.
Scope of delivery: List of all of the components that are supplied with the ladder (example): Ladder components (all) + User Manual + Stabiliser + Trigon stabilizer (where required) + Nuts & Bolts

Assembly instructions

Depending on the ladder type and delivery condition, the ladder may yet have to be fully assembled before use. Description/illustration of the assembly work required before the ladder can be used. Example: Fitting the diagonal and Trigon stabilizer.

General safety information

The packaging can pose a suffocation hazard. Ladders and packaging materials are not toys. Use of this ladder is always associated with a risk of falling off the ladder and of the ladder tipping over. This can result in injury to persons and damage to objects. All of the work performed with and on the ladder must be performed in such a way as to minimize these risks as much as possible. This ladder is only designed for light work and short periods of use. Do not work on the ladder for too long without taking regular breaks. Fatigue is a hazard and can impact the safe use of the ladder. The ladder must be suitable for its relevant use and must only be used in the specified position. Only ever use the treads provided. The ladder and ladder components must not be modified. Always make sure to have a safe handhold and foothold when working on and climbing the ladder. Always observe the national rules and regulations, in particular, if using this ladder for professional work. Only use manufacturer-approved accessories.

Assembly/Use

The 3-section multipurpose ladders consist of a double-sided 2-section stepladder and a leaning ladder. The stepladder can be turned into a leaning ladder (extension ladder). If it has the necessary technical features, the leaning ladder can be used as a stand-alone ladder or as an extension of the stepladder. The 2-section multipurpose ladders consist of a double-sided 2-section stepladder. The stepladder can be turned into a leaning ladder (extension ladder).

Configurations (schematic diagrams)

Free-standing stepladder with attached leaning ladder (3-section ladder). Freestanding stepladder (2-section ladder). Leaning/extension ladder (3-section ladder). Leaning/extension ladder (2-section ladder). Leaning ladder (1-section) (if designed for this purpose) Freestanding stepladder set up on stairs (2-section ladder).

Maintenance/Servicing

The maintenance and servicing work performed on the ladder is intended to make sure that the ladder is working properly. The ladder must be regularly checked for damage. Make sure all of the ladder‘s moving parts are in proper working order. All moving parts must be regularly lubricated. Any repairs to the ladder must be performed by a qualified person and in correspondence with the manufacturer‘s instructions. Always clean the ladder and the moving parts in particular immediately after use if the ladder becomes dirty. Only use conventional, water-soluble cleaning agents. Do not use aggressive or abrasive cleaning agents. If the ladder is being used commercially, it must be regularly inspected by an authorized person to make sure that it is in proper working order (visual inspection and performance test). In this case, it is essential to draw up an inspection schedule that defines the type, scope, and intervals at which the requisite inspections are performed. The intervals between these inspections have to be determined by the relevant operating conditions, in particular the relevant frequency of use, loads applied to the ladder during use, and the frequency and severity of any defects identified during previous inspections. The owner is also responsible for removing defective ladders from use and storing them in such a way as to prevent their use until they have been properly repaired or disposed of.

Storage

Securely fasten and tie down ladders when transporting them (e.g. on roof racks or in cars) to avoid any damage. The ladder should be stored in a dry environment either standing upright, flat on the ground, or hung on a wall with a suitable wall holder. It must be stored in such a way as to prevent it from becoming damaged and all of its components must be protected from the weather. The ladder must be stored in such a way as to be protected from children and such that it does not represent a hazard (e.g. tripping hazard). It must furthermore be stored in such a way that it cannot be used/removed for unlawful purposes.

Packaging/Disposal

The packaging must be disposed of in correspondence with the relevant regulations and laws. When having reached the end of its service life, the ladder must be disposed of in compliance with the relevant regulation. Aluminium is a high-quality material and should be recycled. Please refer to your local authority for more information on recycling.

Service life

This ladder is a high-quality product and is designed to have a long service life if used as intended and regularly serviced.
Manufacturer: KRAUSE-Werk GmbH & Co. KG • Am Kreuzweg 3 • D-36304 Alsfeld
Tel.: +49 (0) 66 31 / 7 95-0 • E-Mail: info@krause-systems.de

www.krause-systems.com • Issue date: 01/06/2024

Frequently Asked Questions (FAQ)

Q: What is the weight capacity of the ladder?

A: The weight capacity of the ladder is 150 kg.

Q: How do I adjust the ladder height?

A: To adjust the ladder height, follow the extension and adjustment instructions in the manual.

Q: Can I use this ladder on uneven surfaces?

A: It is recommended to use the ladder on a flat, stable surface for safety reasons.

References

• systems.ch - Systems Resources and Information.
• Domain2.hu A domain piactér
• systems.pl
• KRAUSE-Systems - Ihr Partner für sichere Steigtechnik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>