Rockford Fosgate RGB-6 6 Feet Extension Cable Instruction Manual
- June 16, 2024
- Rockford Fosgate
Table of Contents
- Rockford Fosgate RGB-6 6 Feet Extension Cable
- Product Information
- CABLES NEEDED FOR EACH SPEAKER INSTALLED
- INSTALLATION ADVISORY:
- M1 & M2 SPEAKERS & SUBWOOFERS COLOR OPTIX™ CABLES REQUIRED
- M1 & M2 MOTO-CANS COLOR OPTIX™ CABLES REQUIRED
- M2 WAKE-CANS COLOR OPTIX™ CABLES REQUIRED
- Specifications
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Rockford Fosgate RGB-6 6 Feet Extension Cable
INSTALLATION ADVISORY
Product Information
The product is a speaker and subwoofer system that requires Gen-2 Color OptixTM cables for installation. The cables needed for each speaker installed are as follows:
| Speaker Type | Cable |
|---|---|
| M1 & M2 Speakers / Subwoofers | RGB-6 / RGB-16 / RGB-25, RGB-Y4P, RGB-Y6P |
| M1 & M2 Moto-Cans | RGB-6 / RGB-16 / RGB-25, RGB-Y4P |
| M2 Wake-Cans | RGB-6 / RGB-16 / RGB-25, RGB-Y6P |
The new Gen-2 Color OptixTM cables have different configurations required to connect Color OptixTM compatible speakers to the PMX-RGB controller. Please refer to the table and diagrams provided in the user manual for proper cable configurations.
The PMX-RGB controller is designed to accommodate 8 speakers/subwoofers for ideal illumination. It can support a maximum capacity of 16 speakers and/or subwoofers on a total cable length of up to 100 ft (30.48 m). However, slight LED dimming may occur at the end of the string.
CABLES NEEDED FOR EACH SPEAKER INSTALLED
MODELS COVERED:
- RGB-6: 6 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-16: 16 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-25: 25 Ft. Color Optix™ Extension Cable for PMX-RGB
- RGB-Y4P: 4-Pin Color Optix™ Y-Adaptor for PMX-RGB
- RGB-Y6P: 6-Pin Color Optix™ Y-Adaptor for PMX-RGB
INSTALLATION ADVISORY:
New Gen-2 Color Optix™ cables require different configurations required to
connect Color Optix™ compatible speakers to the PMX-RGB controller. Please
refer to the table and diagrams for proper cable configurations.
NOTE: The PMX-RGB is designed to accommodate 8 speakers/subwoofers for ideal
illumination. A maximum capacity of 16 speakers and/or subwoofers on 100-ft
(30.48 m) of total cable length can be accomplished. Slight LED dimming may
occur at the end of the string
M1 & M2 SPEAKERS & SUBWOOFERS COLOR OPTIX™ CABLES REQUIRED
Installation of M1 & M2 Speakers / Subwoofers
- Ensure you have the required Gen-2 Color OptixTM cables: RGB-6 / RGB-16 / RGB-25, RGB-Y4P, and RGB-Y6P.
- Refer to the provided table and diagrams to properly configure the cables for connecting Color OptixTM compatible speakers to the PMX-RGB controller.
- Connect the appropriate cables to each M1 & M2 speaker or subwoofer according to the configuration.
- Follow the user manual for further instructions on mounting and connecting the speakers/subwoofers to your audio system.
M1 & M2 MOTO-CANS COLOR OPTIX™ CABLES REQUIRED
Installation of M1 & M2 Moto-Cans
- Ensure you have the required Gen-2 Color OptixTM cables: RGB-6 / RGB-16 / RGB-25 and RGB-Y4P.
- Refer to the provided table and diagrams to properly configure the cables for connecting Color OptixTM compatible Moto-Cans to the PMX-RGB controller.
- Connect the appropriate cables to each M1 & M2 Moto-Can according to the configuration.
- Retain the seal for Moto-Cans as instructed in the user manual.
- Follow the user manual for further instructions on mounting and connecting the Moto-Cans to your audio system.
M2 WAKE-CANS COLOR OPTIX™ CABLES REQUIRED
Installation of M2 Wake-Cans
- Ensure you have the required Gen-2 Color OptixTM cables: RGB-6 / RGB-16 / RGB-25 and RGB-Y6P.
- Refer to the provided table and diagrams to properly configure the cables for connecting Color OptixTM compatible Wake-Cans to the PMX-RGB controller.
- Connect the appropriate cables to each M2 Wake-Can according to the configuration.
- Remove the seal for Wake-Cans as instructed in the user manual.
- Follow the user manual for further instructions on mounting and connecting the Wake-Cans to your audio system.
Specifications
- Product Model: PMX-RGB
- Compatibility: Color OptixTM compatible speakers and subwoofers
- Maximum Speaker/Subwoofer Capacity: 16
- Total Cable Length: Up to 100 ft (30.48 m)
FAQ
Q: Which cables are required for M1 & M2 speakers?
A: For M1 & M2 speakers, you will need RGB-6 / RGB-16 / RGB-25, RGB-Y4P, and RGB-Y6P cables.
Q: How many speakers can the PMX-RGB controller accommodate?
A: The PMX-RGB controller can accommodate up to 8 speakers/subwoofers for ideal illumination. However, it can support a maximum of 16 speakers and/or subwoofers on a total cable length of up to 100 ft (30.48 m).
Q: Is LED dimming possible at the end of the string?
A: Yes, slight LED dimming may occur at the end of the string when using the maximum capacity of speakers and/or subwoofers on a 100-ft cable length.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>