WAGNER W 3400 Electric Paint Roller Instruction Manual

WAGNER W 3400 Electric Paint Roller

Product Information

Specifications

• Model: W 3400
• Country: Germany (D)
• Warranty: 2 years
• Power Supply: 230 V/50 Hz
• Double Insulation
• Power Consumption: 45 W
• Vibration Level: 0.45 l/min
• Sound Pressure Level: 4 bar
• Operating Mode: Electric
• Weight: 1.6 kg

Product Usage Instructions

Safety Precautions
Before using the Farbroller W 3400, please read and understand the safety precautions mentioned in the user manual.

Setup and Assembly

1. Unpack the Farbroller W 3400 and ensure all the components are included.
2. Follow the assembly instructions provided in the manual to securely attach the roller and handle.

Preparation
Prior to using the Farbroller W 3400, make sure to prepare the painting area:

• Cover any surfaces or objects that should not be painted.
• Mix the paint thoroughly according to the manufacturer’s instructions.
• Pour the paint into a suitable container for easy dipping.

Operation
To operate the Farbroller W 3400, follow these steps:

1. Plug the power cord into a suitable electrical outlet.
2. Hold the Farbroller firmly with both hands, ensuring a comfortable grip.
3. Dip the roller into the paint, making sure to cover the roller evenly.
4. Start painting by moving the roller back and forth on the desired surface.
5. Apply even pressure while painting to ensure consistent coverage.
6. Continue painting until the desired area is fully covered.

Cleaning and Maintenance
After using the Farbroller W 3400, clean and maintain it properly:

• Disconnect the power cord from the electrical outlet.
• Remove any excess paint from the roller using a suitable cleaning solution.
• Rinse the roller with water until all paint residues are removed.
• Dry the roller thoroughly before storing it.
• Store the Farbroller W 3400 in a dry and safe place.

Frequently Asked Questions (FAQ)

• Q: What is the warranty period for the Farbroller W 3400?
  A: The Farbroller W 3400 comes with a 2-year warranty.

• Q: What is the power supply requirement for the Farbroller W 3400?
  A: The Farbroller W 3400 requires a power supply of 230 V/50 Hz.

• Q: How do I clean the roller after painting?
  A: To clean the roller, remove any excess paint using a suitable cleaning solution and rinse it with water until all paint residues are removed.

• Q: Can I use the Farbroller W 3400 for outdoor painting projects?
  A: Yes, the Farbroller W 3400 can be used for both indoor and outdoor painting projects.

2 years WARRANTY

W 3400 Paint Roller

Safety precautions

• Before connecting the unit to the mains network, ensure that the available line voltage is identical to that specified on the rating plate.
• Only connect the unit to the line current while it is switched off.
• Unplug the power plug when not in use.
• Power cable and power plug must be undamaged. Replace damaged parts immediately.
• Only professionals may be allowed to make repairs to the electrical system of the unit.
• Never submerge the unit in liquid!
• The power plug must be unplugged when the unit is connected to a faucet for cleaning!
• Do not use hot water for rinsing out and cleaning.
• The unit is not a toy; keep it away from children.
• The unit may not be used in workplaces bound by the explosion-protection regulations.
• Do not point the paint roll or accessories toward yourself; danger of injury by ejected material.

• Materials to be processed:
  Dilutable dispersion paints and latex paints for interior and exterior walls.

• Materials not to be processed:
  Paints and lacquers containing solvents and materials containing heavily abrasive components.

Preparation and mounting

1. Mounting the paint roll (figure 1): Screw in sealing cap (A) clockwise and hold (B) firmly. Slide on mounted roll body until it engages at (C).
2. Mount deuteration unit, close air bleed valve (figure 5, B) and connect hoses (figure 2): slide suction hose (A), air bleed hose (B), paint feed hose (C) onto the respective connection pieces until they stop. Slide on screw sleeves and tighten.
3. Before beginning work, cover or tape up the floor, furniture, door frames and other objects. Place the unit on a sufficiently sized piece of plastic or cardboard.
4. Stir the paint well and thin up to 10 % if necessary (observe information from manufacturer)
5. Submerge suction hose with suction filter (figure 3) to the bottom of the paint container and fasten to the paint container edge with clamp.
6. Open dosage valve at handle. Switch unit on (figure 4). Suction and paint feed hoses and paint roll fill with paint in approx. 2 min. The unit is ready for operation when the first drops of paint emerge. Set the paint feed as required using the dosage valve. When closing the dosage unit, the pump switches off automatically after reaching its maximum pressure.

ATTENTION!
Air in the suction hose or pump area can lead to suction and function interruptions. Ensure that the suction filter is always completely covered with paint. Refill paint in a timely manner, set the paint container at an angle or prepare a new paint container. Switch off the unit before moving the suction hose to a new paint container.

Remedy for sucked-up air

Open air bleed valve (figure 5, A) and let unit run for approx. 1 minute until paint exudes from the air bleed hose. Hold hose over paint container when doing so. Close air bleed valve. If malfunction is still present: repeat procedure.

Breaks during work

Short breaks (up to four hours):

1. Switch off paint pump and open dosage unit in handle.
2. Insert paint roll into plastic bag immediately and tie it up airtight (figure 6, A).
3. Leave suction and air bleed hoses in the paint.

Long breaks (days):

1. Place paint roll in a bucket of water (figure 6, B).
2. Wet the paint surface in the paint container with some water to prevent a skin from forming.
3. Used accessories which are already unscrewed are to be placed into water immediately after use.

Shutting down and cleaning

1. Scrape off paint roll over the paint container.
2. Remove paint roll by snapping it from the roller frame and clean it thoroughly separately. Detach the sealing cap of the paint roll with a suitable tool. Detach paint roll and clean all parts in lukewarm water.
3. Remove suction hose from the paint container and submerge it in a second container filled with water. Hold roller frame above paint container or hang it there. Switch on the unit and pump water up to the roller frame. The remaining paint in the system is pumped back into the paint container.
4. Switch off the feed pump and unplug the power plug from the outlet!
5. Wipe paint off suction hose and air bleed hose.
6. Pull off filter and clean it thoroughly.
7. Place roller frame with paint feed hose in a second container or sink.
8. Fit air bleed hose onto cleaning adapter (figure 7).
9. Open air bleed valve completely (figure 5, A).
10. Fit cleaning adapter onto faucet and rinse system out until clean water exits at the roller frame – approx. one minute – (figure 12).
11. Close air bleed valve (figure 5, B).
12. Slide suction hose onto the cleaning adapter (figure 8).
13. Fit cleaning adapter onto faucet and rinse system out until clean water exits at the roller frame (approx. one minute).

Cleaning the valve unit

1. Screw off deuteration unit, remove suction head and pull out valve unit (figure 9).
2. Thoroughly clean points (figure 10, A + B + C) with a soft brush and water.
3. Press the valve disk against the seating with a screwdriver and turn left and right. This rubs off any existing paint particles (figure 11).
4. Before inserting the valve unit, lightly lubricate the seal rings (figure 10, A).

Conservation of the valve unit after assembly

1. Put a few drops of oil (e.g. sewing machine oil) in the suction connection pieces (figure 2, A).
2. Cover connection piece for paint feed hose with a towel and switch on paint pump briefly.

ATTENTION:
When storing, always leave the dosage unit in the handle in the open position (figure 4).

Item| Description| Order No.
1| Roller frame| 0327 218
2| Seal for roller frame| 0245 401
3| Roll body with sealing cap| 0327 260
4| Sealing cap| 0327 224
5| Paint roll| 0245 717
6| Handle with paint feed hose DN 9 x 4 m| 0245 714
7| Screw sleeve for paint feed hose (Item 6)| 0245 319
8| Cleaning adapter| 0245 706
9| Deaeration unit| 0245 721
10| O-ring for air bleed valve| 0245 421
11| Complete suction hose| 0245 722
12| Suction hose / air bleed hose DN 13 x 0.7 m| 0245 318
13| Screw sleeve for Item 12| 0245 324
14| Clamp for fastening to paint container| 0154 124
15| Upper section of filter| 0245 330
16| Filter| 0016 551
17| compl. valve unit| 0245 221
Accessories W 3400 (not included in scope of delivery)|
---|---
90 cm handle extension| 0230 790
45 cm handle extension| 0230 799
Padded paint roll (for rough surfaces and plaster)| 0220 306
Dispersion brush (for corners and edges)| 0231 798
Thin roller (for thin surfaces)| 0230 798
Paint pads (for corners and edges with smooth surfaces)| 0231 797
Malfunction| Cause| Remedy
---|---|---
Pressure hose fills only partially with paint, then pump switches off.| Dosage unit closed at handle.| Open dosage unit.
Motor is running, but paint pump is not sucking up.| Valves dry, slightly sticky or soiled after longer period of disuse.| Put some water into the suction connection pieces. See valve- unit cleaning.
Paint feed interrupted while working.|

• Filter clogged at suction hose.
• System has sucked up air.

| Clean/aerate filter (Page 6).

Important Note regarding Product Liability!

• Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product only if all parts originate from or were approved by the manufacturer and the
  devices are assembled and operated correctly.

• The use of other accessories and spare parts can partially or completely invalidate the liability.

Two-year warrantee

• The warrantee is valid for two years, starting on the day of sale (receipt).

• It includes and is limited to elimination of the defect, proven to have been caused by inferior production materials or mistakes during assembly, free of charge or replacement of the defective parts. Use, start-up or do-it-yourself assembly or repairs which are not listed in our operating instructions are not covered by the warrantee. Parts subject to wear are also excluded from the warrantee. The warrantee does not cover commercial use. We reserve the exclusive right to make judgments on warrantee obligations. The warrantee is void if the unit was opened by persons other than WAGNER Service personnel. Transport-related damage, maintenance work and damage and malfunctions caused by improper maintenance work are not covered by the warrantee. For implementation of the guarantee, proof of purchase of the unit must be provided, i.e. submitting the original receipt. To the fullest legal extent possible, we are not liable for any personal, material or consequential damages, especially those resulting from use of the unit other than as intended in the operating instructions, start-up or repair in a manner other than described in our operating instructions or repairs performed by a non-professional. Repairs going above and beyond those dealt with in these operating instructions are reserved for our
  factory.

• In case of guarantee or repair, please refer to your point of sale.

Warning

• If the supply cord of this appliance is damaged, it must only be remplaced by a repair shop appointed by the manufacturer, because special purpose tools are required.
• Warning: Do not connect the blue or brown wire to the earth terminal of the plug! The wires in this mains lead are coloured in accordance with the following code:
  • blue = neutral brown = live
• As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
  • Should the moulded plug have to be replaced, never re-use the defective plug or attempt to plug it into a different 13 A socket. This could result in an electric shock.
  • Should it be necessary to exchange the fuse in the plug only use fuses approved by ASTA in accordance with BS 1362. 5 Amp fuses may be used.
  • To ensure that the fuse and fuse carrier are correctly mounted please observe the provided markings or colour coding in the plug.
  • After changing the fuse, always make sure that the fuse carrier is correctly inserted. With out the fuse carrier, it is not permissible to use the plug.
  • The correct fuses and fuse carriers are available from your local electrical supplies stockiest.

Part. No. 0245 865 06/2004 © Copyright by J. Wagner GmbH

Documents / Resources

| WAGNER W 3400 Electric Paint Roller [pdf] Instruction Manual
W 3400, W 3400 Electric Paint Roller, Electric Paint Roller, Paint Roller, Roller
---|---

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>