altrex Nevada 2-part Reform Ladder Instructions
- June 4, 2024
- altrex
Table of Contents
altrex Nevada 2-part Reform Ladder Instructions
The safe use of a stepladder or ladder
Instructions for ladders and stepladders
Congratulations on your purchase of an Altrex stepladder or ladder. The well-
considered details ensure that an Altrex stepladder or ladder is easy to use.
Some instructions relate specifically to either a ladder or stepladder. Should
that be the case, this is clearly stated. Before using the stepladder or
ladder, read these instructions carefully! Save these instructions in case
they are needed for future reference. Also study the illustrations/pictograms
that are shown on the product itself.
1. Basic safety marking and user instructions for all ladders
– Do never stand higher than the RedStep®.
– Do not spend long periods on a ladder without regular breaks (tiredness is a
risk).
– Prevent damage of the ladder when transporting e.g. by fastening and, ensure
the ladder is suitably placed to prevent
damage.
– Ensure the ladder is suitable for the task.
– Do not use the ladder if contaminated, e.g. with wet paint, mud, oil or
snow.
– Do not use the ladder outside in adverse weather conditions, such as strong
wind.
– For professional use a risk assessment shall be carried out respecting the
legislation in the country of use.
– When positioning the ladder take into account the risk of collision with the
ladder e.g. from pedestrians, vehicles or
doors. Secure doors (not fire exits) and windows where possible in the work
area.
– Use non-conductive ladders for unavoidable live electrical work.
– Do not modify the ladder design.
– Do not move a ladder while standing on it.
– Stepladders and ladders must always be positioned on their feet and not on
the step/rung.
– When carrying out work, always keep both feet on a step/rung of the
stepladder or ladder and always face the ladder/ stepladder.
2. Leaning ladders
– Ladder shall never be moved from the top.
– Only use the ladder (single, extending, rope operated) to access a higher
level with safety devices in place (for example,
ladder safety step to access a roof/securing to an object).
3. Standing ladders
– Never stand on the supporting bracket of the stepladder.
– Do not move the ladder whilst in standing position, this can result in the
locking pin shooting out of the combination hook.
– Never stand on the hand-knee rail of a stepladder.
4. Combination ladders
– When using a combination ladder as an extending ladder, ensure that your
feet do not catch in any nylon belts that are present.
– Never slide out the upper ladder of a 3 section ladder in the A-position
with the red rung (or the 4th rung from the top) further than the hinge point
(figure 1).
– Never climb a 3-section ladder in the A-position further than the hinge
point (figure 1).
5. Extending ladders or rope operated ladders
Locking devices shall be checked and be fully secured before use if not operated automatically.
– The loose end of the rope shall be tied to the ladder (only if necessary due
to design of ladder).
– By preference, slide an extending ladder out against a wall up to the
required height.
– Ensure for multi-section ladders that the hooks properly grip onto or under
(rope-operated ladders) the rungs.
– Make sure that it is only possible to climb the ladder from the extended
side (except for rope-operated ladders).
– Make sure that the correct sequence is followed when sliding out the ladder:
unlock the upper section of the ladder, slide it out to the required height
and then lock it into place. If the ladder has 3 sections, repeat this
procedure with the middle section.
– Always first slide in the middle section of the ladder (unlock, slide in,
lock) and then the upper section of the ladder (unlock, slide in, lock).
6. Mobile ladders with platform
Checklist inspection and checks before use
Items to be inspected
For regular inspection, the following items shall be taken into account:
– check that the stiles/legs (uprights) are not bent, bowed, twisted, dented,
cracked, corroded or rotten;
– check that the stiles/legs around the fixing points for other components are
in good condition;
– check that fixings (usually rivets, screws or bolts) are not missing, loose,
or corroded;
– check that rungs/steps are not missing, loose, excessively worn, corroded or
damaged;
– check that the hinges between front and rear sections are not damaged, loose
or corroded;
– check that the locking stays horizontal, back rails and corner braces are
not missing, bent, loose, corroded or damaged;
– check that the rung hooks are not missing, damaged, loose or corroded and
engage properly on the; rungs;
– check that guide brackets are not missing, damaged, loose or corroded and
engage properly on the mating stile;
– check that ladder feet / end caps are not missing, loose, excessively worn,
corroded or damaged;
– check that the entire ladder is free from contaminants (e.g. dirt, mud,
paint, oil or grease);
– check that locking catches (if fitted) are not damaged or corroded and
function correctly;
– check that the platform (if fitted) has no missing parts or fixings and is
not damaged or corroded.
If any of the above checks cannot be fully satisfied, you should NOT use the ladder.
Additional safety instructions when using stepladders/ladders
– Never wear baggy clothing or jewellery. These could become caught when
ascending or descending the stepladder or ladder which could lead to a fall.
– Frequently check that the feet are not worn. Worn feet may damage the
support surface, or can result in the stepladder or ladder slipping.
– In the interest of personal safety, only use accessories or aids that have
been recommended by Altrex.
– Do not leave any tools or other equipment at the bottom of the stepladder or
ladder which you might trip over.
– Should a stepladder or ladder weigh more than 25 kg, this should be lifted
by two people.
Repair and maintenance
Repairs and maintenance shall be carried out periodically by a competent
person and be in accordance with Altrex ‘s instructions.
NOTE A competent person is someone who has the skills to carry out
repairs or maintenance, e.g. by a training by Altrex.
– For repair and replacement of parts, e.g. feet, if necessary contact Altrex
or distributor.
Replacement parts supplied by Altrex must be assembled on the correct Altrex
product and in the same way as the part that is replaced. Assembly
(attachment) and/or repair is effectuated at the own risk and expense of the
client. Altrex is not liable for damage caused by incorrect assembly and/or
repair. Against payment, Altrex can be called in for the repair of your
product, and/or the assembly of the parts in question.
Storage
– Ladders should be stored in accordance with the instructions of Altrex.
– Ladders made of or using thermoplastic, thermosetting plastic and reinforced
plastic materials should be stored out of direct sunlight.
– Ladders made of wood should be stored in a dry place and shall not be coated
with opaque and vapour tight paints.
The important considerations when storing a ladder (not in use) should include
the following:
– Is the ladder stored away from areas where its condition could deteriorate
more rapidly (e.g. dampness, excessive heat, or exposed to the elements)?
– Is the ladder stored in a position which helps it to remain straight (e.g.
hung by the stiles on proper ladder brackets or laid on a flat clutter free
surface)?
– Is the ladder stored where it cannot be damaged by vehicles, heavy objects,
or contaminants?
– Is the ladder stored where it cannot cause a trip hazard or an obstruction?
– Is the ladder stored securely where it cannot be easily used for criminal
purposes?
– If the ladder is permanently positioned (e.g. on scaffolding), is it secured
against unauthorized climbing (e.g. by children)?
Warranty conditions
For warranty conditions check
www.altrex.com/warranty.
Altrex BV
Mindenstraat 7
8028 PK Zwolle
+31(0)38 455 77 00
info@altrex.com
www.altrex.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>