Shenzhen Sanerzhi Chuang Technology SE-16S Wireless Earbuds User Manual
- June 5, 2024
- Shenzhen Sanerzhi Chuang Technology
Table of Contents
Shenzhen Sanerzhi Chuang Technology SE-16S Wireless Earbuds
Product specification
- Product name: SE-16S
- Bluetooth version: 5.0
- Power supply: DC SV
- Sensitivity: 108±3D8
- Battery capacity: 3.7V/40MAH
- Charging case capacity: 3.7V/500MAH
- Charging time: around 60min
- Call duration: 3h
- Music playtime: 4h
- Stand-by duration: around 120h
- Frequency range: 20-20kHz
- Compatible protocols: HSP/HFP/A2DP/AVRCP Package contents
Package contents
- Bluetooth earbuds x2 (left 8 right)
- Charging case x 1
- User manual x 1
- Ear Cap x 8
- Exquisite packing box 1
- USB cable x 1
Operation instructions
R L: Press Play/Pause Answer/Hang-up
R L: Press and hold for 2s {Wake up Siri when your iPhone powers on
R L: Press and hold for 6s Earbuds shutdown
- Double clicks: Next song
- Three clicks: Volume+
- Double clicks: Previous song
- Three clicks: Volume-
How to use
Product schematic
- Charging case Contact point
- USB charging port
- Earbuds charging contact point
- Multi-function touch area
- Earbuds Indicator
- Charging case power % indicator
Charging Case
- Charging: the figure shows the charging case battery capacity
- Full charge: indicator light off
- Charging time: 1.5h
Earphone
- Charging: Orange Light constant
- Full charge: Orange Light of
- Charging time: 1h
Note: Please use the 5V/1A charger when charging the product.
Special attention
Do not use a quick charging device over 5V/1A to avoid damage to the charging case. Description of charging case. Equipped with a 500MAH charging case, it can charge the earphone at least times, meeting the need of listening to music outside for a long time. During the charging process, the two indicator lights of the left and right earphones will turn Orange, and the Orange light will go off after the charging is completed. In the charging mode, the figure on the charging case displays will show the battery capacity. It is fully charged when the figure is” “or above, and please disconnect charging devices from the charging case.
Instructions for both ears
When taken out, the earphone will automatically turn on and match.
- Take the earphones out of the package and put them into the charging case for charging activation.
- Take out two earphones from the charging case at the same time, and the left and right ears will be paired automatically. After the pairing is successful, the LED indicator light of the left ear Enterbluetooth pairing state. (no buttons to trigger)
- Turn on Bluetooth, find the device named SE-16S in Bluetooth, and then click on the connection. After connecting, there will be voice prompts. The status indicator of Bluetooth earphone connection will appear on the phone. (After the first normal connection, a manual shutdown is recommended. Save the data so that the earphone will be automatically connected to the phone when taken out the next time).
Power off
Touch the left and right headphones touch the area for 6 seconds, and it will
be turned off after the Orange light flashes 3 times. When directly put into
the charging case for charging, the earphone will turn off as well. (When
disconnected for five minutes, the earphone will shut down automatically.)
FAQ
-
The phone cannot search for Bluetooth devices
Clear all Bluetooth pairing data stored on your phone, then turn on Bluetooth again and search for devices. -
There is sound on only one side of the earphone
- Determine whether there is electricity on both sides.
- Confirm whether both sides are powered on.
- Determine whether both sides are paired successfully.
- Put earbuds into the charging case again and take them out for reconnection.
- The earphone is stuck or disconnected while calling or listening to music
- The battery of the Bluetooth phone is low.
- The distance between the mobile phone and the Bluetooth earphone is more than 10 meters.
- There is a large area of signal shielding objects between mobile phones and Bluetooth earphones, like walls.
- The left and right ear pairings are not synchronized. It is recommended that the left and right ears be re-paired after shutdown.
- The area should be touched correctly, otherwise, the touch and tap will fail
- The sound quality of the Bluetooth headset is not ideal
A burn-in process is needed while using new earphones, hence it is suggested to play music in an orderly way and the sound quality of each audio band of the earphone will be improved.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment The
device has been evaluated to meet general RF exposure requirements， and the
device can be used in portable exposure conditions with restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>