poly Savi 8445 Office Headset User Guide
- June 17, 2024
- Poly
Table of Contents
QUICK START
SAVI X400 OFFICE BASE
Savi 8445 Office Headset
YOUR HEADSET SYSTEM
Your DECT™ headset system has 3-way connectivity to computer, desk phone and
mobile phone.
CONNECT THE SYSTEM
Following the diagram, connect the base to your computer, power outlet and
desk phone’s headset port, if available.
Otherwise, connect the base to your handset port. See user guide to set up
optional HL10 lifter or EHS cable.
CONFIGURE SYSTEM SETTINGS
Press the navigation wheel for settings menu; scroll and press to select.
Press the Back button for previous menu. See user guide for details.
CHARGE YOUR HEADSET
Charge your headset for a minimum of 20 minutes by placing it in the cradle.
ADJUST YOUR HEADSET FIT
For best sound, point the boom toward the corner of your mouth.
SAVI 8445 Choose a headset wearing style and use the kit to assemble it over-
ear, over-head or behind-head.
POWER ON YOUR HEADSET
To turn on the headset, slide the Power button to reveal green.
NOTE Headset design may vary.
PAIR YOUR HEADSET
- Using the navigation wheel, add your mobile device.
- On your mobile device, go to Bluetooth™ settings and select Poly Savi x400. Once paired, your connected device is displayed on the base.
DOWNLOAD SOFTWARE
Poly Lens Desktop App is required for softphone call control.
Easily change settings and install device updates. Download at
poly.com/lens.
HOW TO
The base Audio buttons allow you to switch to a different phone line/audio
channel.
Make a call
-
Tap an Audio button on the base.
Desk phone only: Press the desk phone’s Headset button or manually remove the handset if you don’t have an HL10 lifter or EHS cable.
Desk phone tip: If you do not hear a dial tone, adjust the switch (F-A) on the back of your base. “A” works for the majority of desk phones. “D” works for Cisco phones. -
Dial from your softphone/mobile phone/desk phone.
End/take a call
To answer/end a call, tap the corresponding Audio button or tap the headset call button.
Desk phone only: If you don’t have an HL10 lifter or EHS cable, press the desk phone’s Headset button or remove the handset when answering a call and hang up when ending a call.
TIP Headset call control for the computer requires Poly software and softphone compatibility. See “Download software.”
TROUBLESHOOTING
No dial tone from desk phone? Adjust the configuration switch (F-A) on the
back of your base until you hear a dial tone. The default “A” works for most
phones.
ATTENTION Use “D” for Cisco phones. Cisco phones connected with EHS cable use
“A.” Need more help?
View complete user guide: support.hp.com/poly
© 2023 Poly. Bluetooth is a registered trademark of Bluetooth SIG, Inc. DECT
is a trademark of ETSI. All trademarks are the property of their respective
owners.
CB8421, CB8421/A, CB8421/J, CB8421/P.215720-26 09.23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>