West Bend L5700 Studio Blender Instruction Manual

STUDIO BLENDER
**Instruction Manual

Register this and other Focus Electrics
products through our website:
www.focuselectrics.com**

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

IMPORTANT SAFEGUARDS

CAUTION

To prevent personal injury or property damage, read and follow all instructions and warnings.
When using electrical appliances, basic safety precautions should always be followed including the following:

• Read all instructions, including these important safeguards and the care and use instructions in this manual.
• Do not use appliance for other than intended use.
• The use of accessory attachments, including canning jars, not recommended by Focus Electrics may cause fire, electric shock or injury.
• Do not operate if the blender is not working properly or if it has been damaged in any manner. For service information see warranty page.
• Do not leave unit unattended while plugged into an electrical outlet.
• Keep hands and utensils out of the blending jar while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is unplugged and not in operation.
• Do not attempt to repair this appliance yourself.
• For household use only.

CAUTION

To prevent personal injuries, read and follow all instructions and warnings.

OPERATING PRECAUTIONS

• Blades are sharp. Use extreme caution during assembly, while operating, disassembly and cleaning.
• Do not use if blades are broken, cracked or loose.
• Always operate blender with lid in place.
• Always hold blending jar while processing for stability.
• Do not leave blender unattended while it is operating.
• Do not remove blending jar from base until the motor has stopped completely.
• Do not use a cracked, chipped or broken blending jar.
• When blending hot liquids, remove lid cap.
• Avoid contacting moving parts.
• To reduce the risk of injury, never place cutting assembly blades on motor base without blending jar properly attached.
• Do not use this appliance on the stovetop, under broiler, in the oven, in the refrigerator or freezer.

CAUTION

To prevent electrical shock, personal injury or property damage, read and follow all instructions and warnings.

ELECTRICITY PRECAUTIONS

• To protect against electric shock, do not immerse cord, plugs, or other electric parts in water or other liquids.
• Do not operate any appliance with a damaged cord or plug.
• Do not use this appliance outdoors.
• Do not plug cord into wall outlet unless power switch is in OFF position.
• Always turn control to OFF and unplug the appliance from outlet when not in use, before cleaning. Allow to cool before putting on or taking off parts and before cleaning.
• A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
• Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. While use of an extension cord is not recommended, if you must use one, the marked electrical rating of the detachable power-supply cord or extension cord should be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord. The cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled by children or tripped over.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
• Do not use an outlet or extension cord if the plug fits loosely or if the outlet or extension cord feels hot.
• Do not attempt to use a voltage converter or other device to adapt your blender to a different outlet or voltage, as damage will occur.

CAUTION

To prevent burns or other personal injuries to children, read and follow all instructions and warnings.

PRECAUTIONS FOR USE AROUND CHILDREN

• Close supervision is always necessary when any appliance is used by or near children.
• Do not allow cord to hang over any edge where a child can reach it. Arrange cord to avoid pulling, tripping or entanglement.

CAUTION

BLENDING JAR PRECAUTIONS

• The blending jar is designed for use with this appliance only. Do not use the blending jar provided with this appliance for any other appliance or application.

• Do not place blending jar on hot surface or in a heated oven.

• Use caution when cleaning blending jar with blades assembled. Wipe exterior with damp cloth, and only rinse interior. If necessary to clean inside of blending jar, disassemble and clean following the instructions in the assembly and
  cleaning sections of this manual.

• Do not use a cracked blending jar or a blending jar having a loose or weakened cutting blade retainer.

• Do not clean blending jar with cleansers, steel wool pads, or other abrasive materials.

SAVE THESE INSTRUCTIONS

Caution : Follow these important steps to assemble, tighten and mount blending jar quickly and correctly. Injury may result if moving blades are accidentally exposed.
Unplug appliance from electrical outlet before assembling, removing, or cleaning.
Never place motor or cord in water or other liquids.

1. Turn jar upside down so the small, bottom opening is facing you.
2.  Put the seal ring on the outer rim of the blade base.
3. Thread blade base to jar.
4. Place assembled blending jar onto motor base with handle on the right. Be sure bottom of attached blade base assembly is sitting flat on the motor base. Turn clockwise to lock in place.
5. Place lid on top of blending jar; turn clockwise to lock in place. Insert stir stick, or place lid cap in center of lid and turn clockwise to lock in place.
6. Your Studio Blender is now ready for use.

USING YOUR BLENDER

1. Make sure blender is unplugged. Place blender motor base on clean dry surface.

2. Place the blending jar onto the motor base and turn counter-clockwise to lock into place.

3. Add ingredients to the blending jar and replace the lid. Lock lid in place by turning clockwise.

4. Before starting, insert the stir stick or lid cap in center of lid. Place hand on the stir stick knob or rest it on jar cover when starting and running motor. When using the stir stick turn the stir stick counter-clockwise to thoroughly mix the
   ingredients.

5. You may add more ingredients through the hole in the center of the lid. When finished adding ingredients, cover the hole with the lid cap, and then plug cord into outlet.

6. Always operate blender on a clean, dry surface to prevent air from carrying foreign material or water into the motor.

7. TO START BLENDING: Choose a speed for blending the ingredients by rotating speed dial and selecting speed (whip, mix, grate, blend and pulse).

8. TO USE PULSE MODE: The pulse button allows you to create short bursts of power. To use the PULSE function, repeatedly rotate and release the speed dial to PULSE. The PULSE function should be used in the initial stages of blending ice and frozen ingredients for smoothies and other frozen drinks. The PULSE function should also be used to break apart larger pieces of food or to control the texture of food when chunkier results are desired.

9. The Blue LED light will be “ON” during operation.

10. Use rubber spatula to push ingredients to be chopped into liquid portion of recipe ONLY when motor is OFF.

11. Switch to a higher speed if the motor seems to labor when processing to prevent overloading of the motor.

12. TO STOP BLENDING: Stop the blending process by turning to the “OFF” position.

13. Wait until blades stop rotating before removing blending jar.

14. Remove blender jar by turning counter-clockwise on base to unlock.

STIR STICK OPERATION – When in use and while the machine is running, stir or rotate the Stir Stick in a counter-clockwise direction so that the Stir Stick scrapes or contacts the sides of the blending jar. This stirring operation will aid in mixing the contents of the blending jar by forcing the ingredients into the mixing blades.

TIPS FOR GENERAL USE

• Always add liquid ingredients to the BLENDING JAR first and then add remaining solid or frozen ingredients. This will prevent excessive wear on the motor and ensure that the ingredients are properly blended. Do not fill above the MAX Fill Line (48 oz/6 cups).
• To add other ingredients when the blender is operating, remove stir stick or lid cap from lid and add ingredients through opening. Replace lid cap and lock in place before processing.
• The stir stick may be used to assist in making frozen drinks or for blending any other types of ingredients. When the stir stick is not being used, be sure to place the lid cap over the hole in the center of the lid.
• Turn the stir stick counter-clockwise for best mixing results.
• When chopping dry ingredients such as breadcrumbs, nuts, spices, etc., make sure that the BLENDING JAR and BLADES are completely dry.
• The PULSE speed should be operated in short bursts. As the PULSE speed is activated and released, the blades should stop rotating between pulses.
• Do not attempt to mix or knead heavy dough, mash potatoes, beat egg whites, grind raw meat, or extract juices from fruits or vegetables. The blender is not made to perform these tasks.
• Do not over-blend foods. Most ingredients should be properly blended or chopped in seconds.
• Do not operate motor base for longer than 3 minutes at a time; allow 5 minutes before running motor again.
• If the motor stalls, turn off and unplug the unit. Remove a portion of the ingredients before attempting to continue.
• Do not add boiling liquids to the BLENDING JAR.
• Cut all firm fruits and vegetables, cooked meats, fish, and seafoods into pieces no larger than ¾“ (1.8cm) to 1” (2.5cm). Cut all kinds of cheeses into pieces no larger than ¾” (1.8cm).
• Allow cooked vegetables and broth to cool before pouring into BLENDING JAR for processing.

CLEANING YOUR BLENDER

1. Switch blender to “OFF” position and unplug from electrical outlet.

2. Hand wash the blending jar, lid, lid cap, and blade base in warm, soapy water, rinse, and dry. Be careful of blades in bottom blending jar when washing and drying. DO NOT WASH ANY PARTS IN THE DISHWASHER.

3. Blender parts are corrosion resistant, sanitary, and easily cleaned. Before first use and after every use, separate parts and clean thoroughly in warm, soapy water, rinse and dry well.

4. Wipe blender base, control knob, and cord with a damp cloth or sponge. To remove stubborn stains, use a mild, non-abrasive cleanser. Never submerge motor base in water.

5. Reassemble the blender with lid open to prevent odor.

6. Check all components before reassembly. If the processing blades are stuck or difficult to turn, DO NOT USE BLENDER. To check, carefully use a scraper or protective hand covering to turn the blades in a counter-clockwise direction
   (opposite edges are sharp). Blades should turn freely.

7. If the blending jar is chipped or cracked, DO NOT USE BLENDER – further use could result in the blender jar breaking. If you need to take the blades out, please use a cloth or protective hand covering to remove blade base.

PRODUCT WARRANTY

Appliance 1 Year Limited Warranty
Focus Electrics, LLC (“Focus Electrics”) warrants this appliance from failures in the material and workmanship for one (1) year from the date of original purchase with proof of purchase, provided the appliance is operated and maintained in conformity with the provided Instruction Manual. Any failed part of the appliance will be repaired or replaced without charge at Focus Electrics’ discretion. This warranty applies to indoor household use only.
This warranty does not cover any damage, including discoloration, to any non- stick surface of the appliance. This warranty is null and void, as determined solely by Focus Electrics if the appliance is damaged through accident, misuse, abuse, negligence, scratching, or if the appliance is altered in any way.
THIS WARRANTY IS IN LIEU OF ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICUALR PURPOSE, PERFORMANCE, OR OTHERWISE, WHICH ARE HERBY EXCLUDED. IN NO EVENT SHALL FOCUS ELECTRICS BE LIABLE FOR ANY DAMAGES, WHETHER DIRECT, INDIRECT, INCIDENTAL, FORSEEABLE, CONSEQUENTIAL, OR SPECIAL, ARISING OUT OF OR IN CONNECTION
WITH THIS APPLIANCE.
If you think the appliance has failed or requires service within its warranty period, please contact the Focus Electrics Customer Service Department at (866) 290 –1851 or e-mail us at service@focuselectrics.com. Return shipping fees are non-refundable. A receipt proving  riginal purchase date will be required for all warranty claims. Hand-written receipts are not accepted. Focus Electrics is not responsible for returns lost in transit.

Valid only in USA and Canada

REPLACEMENT PARTS

Replacement parts, if available, may be ordered directly from Focus Electrics online at www.focuselectrics.com, or you may call or e-mail the service department at the number/e-mail address listed above, or by writing to us at:

Focus Electrics, LLC
Attn: Customer Service
P. O. Box 2780
West Bend, WI 53095

Be sure to include the catalog/model number of your appliance (located on the bottom/back of the unit) and a description and quantity of the part you wish to order. Along with this include your name, mailing address, Visa/MasterCard number, expiration date and the name as it appears on the card. Checks can be made payable to Focus Electrics, LLC. Call Customer Service to obtain purchase amount. Your state’s sales tax and a shipping/processing fee will be added to your total charge. Please allow two (2) weeks for delivery.
This manual contains important and helpful information regarding the safe use and care of your new Focus Electrics product. For future reference, attach dated sales receipt for warranty proof of purchase and record the following information:
Date purchased or received as gift:

Where purchased and price, if known:

Item number and Date Code (shown bottom/back of product):___

L5700 11/07 West Bend ® , a Brand of Focus Electrics, LLC. Printed in China
© 2007 West Bend ® , a Brand of Focus Electrics, LLC.
www.focuselectrics.com

References

• focuselectrics.com
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>