West Bend L5834 Electric Can Opener Instruction Manual

: June 16, 2024
: West Bend

Table of Contents

West Bend L5834 Electric Can Opener
Product Usage Instructions
IMPORTANT SAFEGUARDS
OVERVIEW
USING YOUR ELECTRIC CAN OPENER
PRODUCT WARRANTY
REPLACEMENT PARTS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

West Bend L5834 Electric Can Opener

$West-Bend-L5834-Electric-Can-Opener-fig- $2$$

Specifications

Piercing Lever/ Cutting Attachment
Magnetic Lid Holder
Bottle Opener
Knife Sharpener
Cord Storage

Product Usage Instructions

Opening Cans

Place the electric can opener on a dry, level surface.
Plug the cord into an electrical outlet.
Raise the piercing lever.
Place the rim of the can firmly under the can guide pin and against the geared wheel.
Press the piercing lever all the way down.
The motor will start turning the can and cutting the lid. It is not necessary to hold down the lever.

Cleaning

Unplug the cord from the electrical outlet.
To remove the cutting attachment, raise the piercing lever and gently pull it towards you.
Wash the cutting attachment in warm, soapy water, rinse, and dry thoroughly. Alternatively, the cutting attachment can be placed in the top rack of the dishwasher.
Wipe the can opener body and the area behind the cutting head attachment with a damp cloth. Do not immerse the can opener in water.
To reassemble, hold the lever at an angle and slide the cutting head attachment shaft into the hole in the can opener body, then lower the lever.

Helpful Hints

Remember to regularly wash the cutting attachment and geared wheel for proper maintenance and cleaning.

Product Warranty

The Electric Can Opener comes with a 1-year limited warranty. This warranty is valid only in the USA and Canada.

Replacement Parts

If replacement parts are needed, they can be ordered directly from Focus Electrics, LLC. There are several ways to place an order:

Order online at www.focuselectrics.com
Email service@focuselectrics.com
Call (866)290-1851
Write to: Focus Electrics, LLC
Attn: Customer Service P. O. Box 2780 West Bend, WI 53095
If paying with a check or money order, please contact Customer Service first for the order total. Include a letter stating the model or catalog number of your appliance, a description of the part(s) you are ordering, and the quantity desired. Make the check
payable to Focus Electrics, LLC.

Frequently Asked Questions (FAQ)

Where can I register my product?
You can register your Electric Can Opener and other Focus Electrics products on our website: www.registerfocus.com
Can I wash the can opener in water?
No, you should not immerse the can opener in water. Only the cutting attachment is dishwasher safe.
How often should I clean the cutting attachment and geared wheel?
It is recommended to wash the cutting attachment and geared wheel regularly for proper maintenance and cleaning.

Register this and other Focus Electrics products through our website: www.registerfocus.com
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE
2011 West Bend, a Brand of Focus Electrics, LLC.

IMPORTANT SAFEGUARDS

To prevent personal injury or property damage, read and follow all instructions and warnings.
When using electrical appliances, basic safety precautions should always be followed including:

Read all instructions.
To protect against fire, electric shock, and injury to persons do not immerse cords, plugs, or other electric parts in water or other liquids.
Close supervision is necessary when this appliance is used by or near children.
Always unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts and before cleaning.
Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, or has been damaged in any manner. For service information see the warranty page.
The use of accessory attachments not recommended by Focus Electrics may cause fire, electric shock, or injury.
Do not use this appliance outdoors.
Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
To disconnect, remove the plug from the wall outlet.
Do not use the appliance for other than intended use.
Do not attempt to repair this appliance yourself.
A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.
Longer extension cords are available, but care must be exercised in their use. While use of an extension cord is not recommended, if you must use one, ensure that the marked electrical rating of the extension cord is equal to or greater than that of the appliance. If the plug is of the grounded type, the extension cord must be a grounding-type 3-wire cord. To avoid pulling, tripping or entanglement, position the extension cord so that it does not hang over the edge of the counter, table or other area where it can be pulled on by children or tripped over.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
Do not use an outlet or extension cord if the plug fits loosely or if the outlet or extension cord feels hot.
Avoid contact with moving parts.
Do not open pressurized (aerosol-type) cans.
Do not open cans of flammable liquids such as lighter fluids.
For household use only.

SAVE THESE INSTRUCTIONS

OVERVIEW

$West-Bend-L5834-Electric-Can-Opener-fig- $3$$

USING YOUR ELECTRIC CAN OPENER

To open cans:

Place can opener on a dry, level surface.
Plug cord into an electrical outlet.
Raise the piercing lever.
Place rim of can firmly under can guide pin and against the geared wheel.
Press the piercing lever all the way down.
The motor will begin turning the can and cutting the lid. It is not necessary to hold the piercing lever down or to hold the can during the cutting action. Large cans may need to be guided while being opened.
The motor will automatically stop when the can is open.
Remove the can from the opener. Check the contents of the can to make sure no pieces of label or metal shavings may have fallen in. Carefully remove lid from magnetic lid holder.

To sharpen knives:

Place the cutting edge of knife in the knife slot located on the back of the can opener.
Draw the knife blade through the slot several times. Always direct blade away from yourself and others.
Clean knife after sharpening.
NOTE : Serrated blades should never be inserted into this appliance.

To open bottles:
Hold top of can opener to stabilize the unit. Open bottles slowly to avoid spilling contents.

CLEANING YOUR ELECTRIC CAN OPENER

Unplug cord from the electrical outlet.
To remove the cutting attachment, raise the piercing lever and gently pull it towards you.
Wash the cutting attachment in warm, soapy water, rinse and dry thoroughly; or the cutting attachment may be placed in the top rack of the dishwasher.
Wipe the can opener body and the area behind the cutting head attachment with a damp cloth. Never immerse the can opener in water.
To re-assemble, hold the lever at an angle and slide the cutting head attachment shaft into the hole in the can opener body, lower lever.

HELPFUL HINTS

If there is a bump, dent, or heavy seam in the rim of the can, open the other end of the can or start cutting just beyond the problem area.
To use the cord storage in the back of the opener, push cord in or out as needed.
If the piercing lever does not move freely, remove and clean the cutting attachment.
Shredded labels, metal shavings, or poor cut can be caused by infrequent cleaning. Wash the cutting attachment and geared wheel regularly.

PRODUCT WARRANTY

Appliance 1-Year Limited Warranty

Focus Electrics, LLC (“Focus Electrics”) warrants this appliance from failures in the material and workmanship for one (1) year from the date of original purchase with proof of purchase, provided the appliance is operated and maintained in conformity with the provided Instruction Manual. Any failed part of the appliance will be repaired or replaced without charge at Focus Electrics’ discretion. This warranty applies to indoor household use only.
This warranty does not cover any damage, including discoloration, to any non- stick surface of the appliance. This warranty is null and void, as determined solely by Focus Electrics if the appliance is damaged through accident, misuse, abuse, negligence, scratching, or if the appliance is altered in any way.
THIS WARRANTY IS INSTEAD OF ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, OR OTHERWISE, WHICH ARE HEREBY EXCLUDED. IN NO EVENT SHALL FOCUS ELECTRICS BE LIABLE FOR ANY DAMAGES, WHETHER DIRECT, INDIRECT, INCIDENTAL, FORSEEABLE, CONSEQUENTIAL, OR SPECIAL, ARISING OUT OF OR IN CONNECTION WITH THIS APPLIANCE.
If you think the appliance has failed or requires service within its warranty period, please contact the Focus Electrics Customer Service Department at 866-290-1851, or e-mail us at service@focuselectrics.com. A receipt proving the original purchase date will be required for all warranty claims, handwritten receipts are not accepted. You may also be required to return the appliance for inspection and evaluation. Return shipping costs are not refundable. Focus
Electrics is not responsible for returns lost in transit.
Valid only in USA and Canada

REPLACEMENT PARTS

Replacement parts, if available, may be ordered directly from Focus Electrics, LLC in several ways. Order online at www.focuselectrics.com, e-mail service@focuselectrics.com, over the phone by calling (866)290-1851, or by writing to:
Focus Electrics, LLC
Attn: Customer Service P. O. Box 2780 West Bend, WI 53095
To order with a check or money order, please first contact Customer Service for an order total.
Mail your payment along with a letter stating the model or catalog number of your appliance, which can be found on the bottom or back of the appliance, a description of the part or parts you are ordering, and the quantity you would like. Your check should be made payable to
Focus Electrics, LLC.
Your state/province’s sales tax and a shipping fee will be added to your total charge. Please allow two weeks for processing and delivery.

This manual contains important and helpful information regarding the safe use and care of your new Focus Electrics product. For future reference, attach the dated sales receipt for warranty proof of purchase and record the following information: