RAVAK FREEDOM O Bathtub Instruction Manual
- June 16, 2024
- RAVAK
Table of Contents
RAVAK FREEDOM O Bathtub
Product Information
Specifications
- Model: FREEDOM O
- Dimensions: 169cm x 80cm
- Mounting: FM 080.00 + R-box
- Material: Silicon
Product Usage Instructions
Mounting
To install the FREEDOM O, follow the steps below:
- Ensure you have the FM 080.00 + R-box mounting kit.
- Position the FREEDOM O in the desired location.
- Use the provided screws (4x) to secure the FREEDOM O to the mounting surface.
- Refer to the dimensions indicated in the manual for proper positioning.
Maintenance and Cleaning
To maintain and clean the FREEDOM O, follow these guidelines:
- For general cleaning, use a mild cleaner suitable for silicon materials.
- For disinfection purposes, use RAVAK Desinfektant or a similar product recommended by the manufacturer.
- Avoid using abrasive cleaners or materials that may damage the silicon surface.
FAQ
Q: Where can I find more information about the product?
A: For further information, please contact your local Ravak dealer.
Q: Can I recycle the product?
A: Please observe your local country guidelines or laws regarding recycling. Materials that are not suitable for recycling should be disposed of at an official waste control center.
Q: How can I contact Ravak for support or inquiries?
A: You can contact Ravak through the following channels:
- Ukraine Representative Office: Tel: 00380 44 2203232, 00380 44 3605200, Fax: 00380 44 2204343, Email: ravak@ravak.kiev.ua, Website: www.ravak.ua
- OOO RAVAK (Russia): Tel/Fax: 007 495 710 82 23, 007 495 450 12 77, Email: ravak@inbox.ru, Website: www.ravak.com
- RAVAK Baltic (Lithuania): Tel: +370 37 328013, Fax: +370 37 328016, Email: info@ravak.lt
- Ravak Czech Republic: Email: info@ravak.cz, Website: www.ravak.com
TOOLS
ASSEMBLY STEPS
For further information, contact your local Ravak dealer.
The manufacturer reserves the right to amend or improve on existing designs or
features. Please help preserve the environment by observing local country
guidelines or laws regarding re-cycling. Materials which are not suitable for
re-cycling must be disposed of at an official and suitable waste control
centre.
Maintenance
clean the plastic parts with a cloth and mild detergent. never use any abrasive pastes, dissolvents, acetone or detergents and desinfectants, that contain chlorine. the manufacturer accepts no liability for any type of use or care other than those contained in these instructions. The manufacturer reserves the right to introduce technical changes without notice. For further information about assembly, use, and care contact your local dealer. The manufacturer recommends: RAVAK CLEANER – works to remove old and dried-on debris from glass surfaces, shower frames, enamel and acrylic bathtubs, washbasins and water taps; RAVAK DISINFECTANT – is a special preparation with considerable anti-bacterial and anti-fungal effects.
RAVAK SLOVAKIA spol. s r.o., Einsteinová 11, 851 01 Bratislava
tel.: +421 2 / 444 550 01, fax: +421 2 / 444 550 02, e-mail:
obchod@ravak.sk, web:
www.ravak.sk
References
- RAVAK COM - Acrylic Bathtubs and Shower Enclosures
- RAVAK a.s. - Když koupelnu, tak RAVAK – české koupelny světového designu!
- RAVAK GmbH - Das Badeerlebnis in Ihrem Badezimmer
- RAVAK Hungary Kft. - ha fürdőszoba akkor RAVAK
- Ravak Polska S.A. - dożywotnia gwarancja na wszystkie wanny. Kompleksowe wyposażenie łazienek.
- Kúpeľňa a zariadenie kúpeľne | RAVAK
- RAVAK UA - ЕСЛИ ВАННАЯ КОМНАТА, ТО RAVAK (ванны, душевые уголки, умывальники, гидромассаж )
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>