VEELOK TS-02B Farmhouse TV Stand Installation Guide
- June 16, 2024
- VEELOK
Table of Contents
CREAT YOUR DREAM SPACE TS-02B
IMPORTANT SAFTY NOTICE
READ CAREFULLY BEFORE BEGINNING ASSEMBLY !
There are small components used in the construction of this product.
Loose items should be kept away from pets and children to avoid a choking hazard.
Keep all plastic bags and packaging film away from pets and children to avoid suffocation.
If you find the label difficult to peel off, kindly use a hairdryer to warm it up first for easier removal.
Assemble the furniture on an empty carton, carpet, or rug to prevent scratches
or damage.
Ensure the product is fully assembled before use.
If you are missing any hardware or products, do not use it until you have
restored the missing parts.
It requires 2 people for assembly.
Read this instruction manual prior to assembly to familiarize yourself with
the various steps. Lay out all components and hardware separately on a flat
surface and make sure that no parts are missing or damaged before assembly.
Do not destroy or discard any packaging until you are certain that you have
all the necessary parts for assembly.
Hand tighten all hardware and be careful not to over tighten to avoid damaging
the product.
We strive to deliver 100% customer satisfaction through our high-quality products and excellent customer service. If you encounter any issues with our products, such as damages during shipping, installation problems, or any other concerns, please do not hesitate to contact us.
We strive to deliver 100% customer satisfaction through our high-quality products and excellent customer service. If you encounter any issues with our products, such as damages during shipping, installation problems, or any other concerns, please do not hesitate to contact us.
USING CAM LOCK AND QUICKFIT
QUICKFIT: Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
CAM LOCK: When fitting cam lock,ensure starting position is correct before you insert connecting quickfit.
Quickfit head should be in the centre of the cam lock when the two panels are joined.
Turn cam lock clockwise to tighten with screwdriver.
HARDWARE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>