DEREAL MNC-RED-4 Cordless Mini Chainsaw Instruction Manual
- June 16, 2024
- DEREAL
Table of Contents
DEREAL MNC-RED-4 Cordless Mini Chainsaw Instruction Manual
HOW TO USE CORRECTLY :
During Operation:
- Always start a cut with the chain rotating at full speed
- Use caution when approaching the end of a cut.
- Never put pressure on the garden pruner when reaching the end of a cut.
- Do not cut more then one branch at the same time.
HOLDING AND CONTROLLING THE GARDEN PRUNER
WARNING: Please keep the spike dentate structure）stick to branch closely during cutting work.
Save This Manual!
Because a garden pruner is a high-speed, fast-cutting power tool, special safety precautions must be observed to reduce the risk of personal injury.
Read this instruction manual thoroughly before use and periodically there after. Follow all safety precautions. Careless or improper use of the garden pruner can cause serious or fatal injury.
1) Hexagon nut (2 ) Tensioning knob 3) Chain cover plate 4 Guide plate 5 Chain Saw 7 Guide plate adjustment pin 6) Tensioning bolts 9 Torsion spring 10 Left casing 11 Fixed bolt 8 Chain protective cover ( 12 ) Bearing 6900 RS 13 Output shaft ( 14 ) Gear 15 Gear cover ( 16 ) Bearing 698 RS ( 17 ) Right casing ( 18 ) RS550 motor ( 19 ) Rear cover of the casing 20 Battery ( 21 ) Pin holder ( 22 ) Switch trigger ( 23 ) Trigger lock ( 24 ) switch ( 25 ) Protective board ( 26 ) Drive sprocket.
A), Keep work area clean and well lit. Cluttered or dark arsas invita
accidents. Cut wood only. For example, do not use the garden pruner for
cutting matal plastic or masonry
This gardien pruneris designed for cutting branches and limbs around the tome.
It is not designed for falling trees or cutting logs
B) , Keep children and bystanders away while operating a power tool, Distractions can cause you to lese control. Store idle power took out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
C) To reduce the risk of eye injury, always wear proper eye protection Always proper clothing and protective apparel, including proper eye protection. To reduce the risk of cut injuries, keep hands, feet and other parts of your body away from the saw chain
D), Keep the garden pruner well maintained. Keep the saw chain sharp and clean. Clean the gardenpruner before use and remove mood scraps. Nevercut siith a loose chain.. Don’tune the garden pruner if chain get loose or blunt, and don’t use hin guide tarnut straight.
E, Operator warming
Working with the garden pruner can be strenuous. The operator must be in good
physical condition and mental health. Do not operate the garden pruner while
under the influence of any substance(drug, alcohol or medication, etc)Bealert.
Do not operate the garden prunerwhen you are tined
A F), Do not force the powertool. Using the power tool correctly will do the job better and safe at the rate for which it was designed.
AWARNING Reactive Forces: Pull-in
Pull-in occurs when the chain on the bottom of the bar is suddenly stopped or
significantly slowed when it is pinched, caught or encounters a foreign object
in the wood. The reaction of the chain pulls the garden pruner forward and may
cause the operator to lose control, which, in turn, may cause serious or fatal
injury.
- Cut with a sharp, properly tensioned chain.
- Always start a cut with the chain rotating at full speed
- Use caution when cutting small-size brush, branches and saplings which may easily catch the chain, spring to wards you or pull you off balance.
- Do not use the garden pruner with a damaged or missing guard. Only for home use.
Maintenance, Repair and Storage
There are no user-authorized repairs for the battery, charger or garden
pruner. To reduce the risk of fire, electric shucker other personal injuryand
property damage Theban and chain are the only user-serviceable parts of the
garden pruner.
Use of parts that are not authorized or approved by ours May cause serious or
fatal injury or property damage.
a) we recommends that only identical replacement parts be used forrepair or
maintenance. Do not use the notauthorized battery to this garden pruner and do
not use not-authorized changer to this battery, and do not use this changer in
not authorized battery. Do not use damaged or deformed battery.
b) Remove the battery any time the garden pruner is not in use Always
release the trigger switch and remove the battery before assembling,
transporting, adjusting, inspecting Remove battery in storage, and store the
battery at an ambient temperature between 50°F and 68°F (10°C and 20°C) with a
charge between 40% and 50%. Never use or charge a malfunctioning,
damaged,cracked, leaking or deformed battery.Charge the battery to 100% for
first use.
c) Charge the battery to 100% every 3 month.
d) Keep the battery dry. Protect it from rain, water, liquids and damp
conditions. Never immerse the battery in water or other liquids.
Holding and Controlling the Garden Pruner
WARNING
Assembling the Garden Pruner
WARNING: make sure the battery is removed before starting assembly.
-
Remove bar nut by Hex wrench
-
Turn the chain adjustment screw anticlockwise position like the picture
-
Lift the saw chain above the guide bar. Make sure that the edges of the cutting links are facing forward on the top edge of the guide bar.
-
Place the chain over the drive sprocket Fit the guide bar over the bar bolt Locate the chain adjuster pin in the hole in the bar
-
Install the bar cover and protective guard. Finger tighten bar nut.
-
Tighten the saw chain Turn the chain adjustment clockwise
-
Deep tighten the bar nut by Hex wrench.
-
Install the battery.
Tensioning the Chain.
Lubricating the Saw Chain and Guide Bar
Never operate your garden pruner without bar and chain lubrication. If the
chain runs dry, the cutting attachment will be damaged beyond repair within a
very short time.
Switching the Garden Pruner on and off
Switching the Garden Pruner on and off
- Depress and hold the triggers witch lockout with your thumb.
- While holdingthe trigger switch lockout, squeezethe triggers witch with your index finger The saw chain will start rotating.
During Operation
- Always start a cut with the chain rotating at full speed
- Use caution when approachingthe end of a cut.
- Never put pressure on the garden pruner when reaching the end of a cut.
- Do not cut more then one branch at the same time.
After Finishing Work
To reduce the risk of personal injury from unintended activation or
unauthorized use, switch off the garden pruner and remove the battery before
transporting the garden pruner or putting it down. Clean the garden pruner,
battery and charger: Clean the garden pruner’s polymer components with a
slightly dampened cloth. Do not use detergents or solvents. They may damage
the polymer components Remove the sprocket cover and clean the area around the
chains procket with a slightly dampened cloth or resin solvent.
Keep the battery removed and charger unplug housing and guides free from foreign matter and clean as necessary with a soft brush or soft, dry cloth. Store the garden pruner indoors in a dry, secure place that can not be accessed by children or other unauthorized users.
WARNING
Read instruction manual thoroughly before using and follow all safety precautions. Improper use can cause serious or fatal injury.
AFTER SALE SERVICE:
Refund or Replacement
Cordlesstool@hotmail.com
Technical Support
9495021738
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>