Cosmic Craft 1010-1010-C Toyota Sequoia Cargo Lockbox Instruction Manual

: June 16, 2024
: Cosmic Craft

Table of Contents

Installaon Instrucons
Use Instrucons
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2023+ Toyota Sequoia Cargo Lockbox
Installation and Use Instructions Model 1010-1010-C
Revision A, December 2023

Installaon Instrucons

Package Contents

Lockbox Assembly
Security Bracket
(2) ¼” Locknuts
(2) M6 Self-Tapping Screws
(2) Security Keys

Required Tools

10mm Socket Wrench
7/16” Socket Wrench

Installaon

Slide the third row seats all the way towards the front of the vehicle to access the track cover.
Begin removing the track cover by pulling it backwards towards the rear of the vehicle from the grooves at the boom.
Once you have dislodged all of the retainers holding the track cover in place remove it from the vehicle.
Remove the two ﬂip up e down points using a 10mm socket wrench.
Remove the ligate latch trim by prying up along the length from the inside edge.
Remove the cargo area ﬂoor by prying up at each yellow retainer, then along the sides to release two hidden retainers, then once all retainers are dislodged pull it backwards toward the rear of the vehicle.
Use a 10mm socket wrench to secure the security bracket to the second seat bracket from right using the two M6 Self-Tapping Screws.
Replace all the removed trim.
Fold the third row seats down, then place the lockbox into the cargo area taking care to align the bolts in the back of the lockbox with the slot in the security bracket.
Use a 7/16” Socket Wrench to install the (2) ¼” Locknuts on the bolts that are now protruding through the security bracket.

Use Instrucons

The Disclaimer
Cosmic Cra LLC makes no guarantee as to the security level of the lockbox and cannot be held liable for the security of its contents. The lockbox is meant to act as a the deterrent by slowing down would be thieves who would otherwise smash and grab your valuables that were le completely unsecured in your vehicle. Determined thieves, given enough me, will always ﬁnd a way.
Injury Disclaimer
Aermarket modiﬁcaons to your vehicle oen come at an increased risk of injury during an automove accident. The lockbox is inherently a large, heavy, steel object in the cargo area of your vehicle. During an accident the lockbox has the potenal to increase the risk of injury to the occupants in various ways. By choosing to install the lockbox in your vehicle you are accepng this risk and absolving Cosmic Cra LLC and its owners and agents of any liability from such incidents.
Opening the Lockbox
The lockbox is equipped with a dual acon locking cam lever, meaning it can be unlocked either with the included keys or with a combinaon. The default combinaon is 0000. Either rotate the number wheels to the combinaon or insert the key and turn 90 degrees. Then, grab the lever from the top and boom edge around the key inseron area and pull it out towards you; it should open about 15 degrees. Next, rotate the enre lever down 90 degrees to disengage the cam lock from the lockbox housing. Now you can pull the lever towards you to slide out the drawer.
Closing the Lockbox
Slide the drawer back into the housing and press ﬁrmly on its face to ensure it is seated all the way into the housing. Rotate the lever back up 90 degrees to reengage the cam lock with the housing; you may feel a ﬁrm resistance about half way through but you should be able to push through it. If you feel a resistance that does not budge you have not push the drawer all the way into the housing. Now push the lever back into the lock housing. The lockbox can be le in this unlocked state, but it is recommended to now lock it by reversing whatever acon was used to unlock it (either rotate the number wheels to random numbers or turn the key barrel 90 degrees back the opposite direcon).
Changing the Combinaon
Open the drawer using the number wheels with the current combinaon. On the back of the lock housing, ﬁnd the lever labelled “FLIP UP TO CHANGE COMBINATION” and ﬂip it up. Rotate the number wheels to the desired combinaon. Flip the lever back down.
Third Row Seat Adjustment
This lockbox is compable with all posions of the third row seat but care must be taken during adjustment. When the third row seats are folded ﬂat they can be adjusted all the way towards the front of the vehicle to maximize the ﬂat cargo area. However, NEVER fold the third row seats back up with them in the full forward posion; DAMAGE WILL OCCUR to the lockbox’s bridge ﬂaps by way of the front edge catching the seam of the third row seat back. ALWAYS adjust the third row seats to a posion where the bridge ﬂaps are past the third row seat back lower seam before folding the third row seats up.
Reasonable Loading
This lockbox is designed with normal use and contents in mind. It is not intended for the storage and transport of unreasonably heavy or dense objects and should be loaded with this in mind. Do not ever use the lockbox drawer for the support of humans or animals or to bear weight over top of humans or animals.
Warranty
Cosmic Cra LLC warrants your lockbox to be free of mechanical defects aﬀecng the normal operaon for 365 days from the date of shipping.
Contact info@cosmic-cra.com for warranty concerns.