WTTY KM007-RGBIR570UL RGB LED Mirror for Bathroom User Guide

WTTY KM007-RGBIR570UL RGB LED Mirror for Bathroom

Product Information

Specifications

• Manufacturer: Guang Dong Kosmo Smart Home Devices Co., Ltd.
• Address: No. 65, Linhai North Road, Shatian Town, Dongguan City, Guangdong Province, China
• Contact Email: slmzgm@163.com

Product Usage Instructions

Before Installation

Please Note Before Installation:

1. Read all instructions carefully before assembling the item.
2. Check for any transit damage or missing parts upon opening the package.
3. Test the mirror and each function by powering it with a plug before installation.
4. It is recommended to have two or more adults assemble the product.
5. Disconnect power before installing, adding, or changing any components.
6. Ensure that the fixing location can support the weight of the complete fitting.
7. Keep the voltages between 110V and 120V. If the voltage exceeds 120V, use a transformer.
8. A qualified technician or electrician is highly recommended to connect the wires to the electrical junction box.
9. Always disconnect the power supply before cleaning the mirror.

Note: Due to the workmanship production process, the size error of the items does not exceed 1-2 inches.

Installation Instruction

1. Check Functions:
2. Knock the nail in.
3. Tighten the screw to ensure the wall bracket stays sturdy on the wall.
4. Hang the mirror on the wall bracket.
5. When installing, pay attention to following the directions of the switch (easier to operate) to install.
6. Turn on the power switch.

Check Functions
Before installation, please check to make sure these functions work properly:

Anti-fog Switch:

1. After connecting the power, the anti-fog function is already turned on automatically.
2. If you don’t need to use it, just touch it to turn it off to prevent wasting energy.
3. The defogging will take effect within 10 minutes after it’s turned on, so you can turn it on 10 minutes before taking a bath.
4. Auto-off after 1 hour.

Front Light Dim Switch:

1. Short press this button to change the colour temperature among cold light, white light, and warm light, and turn on/off the light.
2. Long press this button to adjust the brightness of the light. Dimmable range: 20%-100%.

RGB Backlight Dimming:

1. Short press this button to change the colour among colourful, cold light, white light, warm light, pink, red, green, and blue.
2. Long press this button to adjust the brightness of the light.

FAQ

• Q: What should I do if the LED lights don’t turn on or the defogging doesn’t work?
  A: Open the cover of the power supply on the back of the mirror to test the power cables. If they are loose, tighten them. Make sure to cut off the power before testing the power supply and cables.

• Q: What should I do if part of the light strip is faulty?
  A: After using it for a few months, if the light doesn’t work, try pulling the outer silicone strip away and pressing the inner light strip inward. If it still doesn’t work, replace the strip light. Please contact us to replace the power supply.

If you have any other problems, please feel free to contact us at slmzgm@163.com.

Before Installation

Please Note Before Installation:

1. Please read all instructions carefully before assembling the item.
2. After opening the package, first check if there is transit damage or missing parts.
3. Please power the mirror with a plug to test the mirror and each function before installation.
4. Assembly by two or more adults is highly recommended.
5. Disconnect power before installing, adding or changing any components.
6. Ensure that the fixing location can take the weight of the complete fitting.
7. Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use a transformer.
8. To connect the wires to the electrical junction box, a qualified technician or electrician is highly recommended.
9. Before cleaning the mirror, make sure that the power supply is disconnected.

Please Notes:
Due to the workmanship production process of the items, the size error does not exceed 1-2 inches.

For any problems, please feel free to contact us:
slmzgm@163.com.

Check Functions

Before installation, please check to make sure these functions work properly:

Anti-fog Switch:

1. After connecting the power, the anti-fog function is already turned on automatically. If you don’t need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after it is turned on, so you can turn it on 10 minutes before taking a bath.
2. Auto-off after 1 hour.

Front Light Dim Switch:

1. Short press this button to change the colour temperature among cold light, white light, and warm light and turn on/off the light.
2. Long press this button to adjust the brightness of the light. Dimmable range 20%-100%.

RGB Backlight Dimming:

1. Short press this button to change the colour among colourful, cold light, white light, warm light, pink, red, green, and blue.
2. Long press this button to adjust the brightness of the light.

Dimension

PACKAGE CONTENTS

YOU MAY NEED THESE TOOLS

Installation Instruction

Method 1: Plugin
Insert the plug into the socket, keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use a transformer.

Method 2: Hardwire
Cut the plug, connect the same colour wire and tighten them(Disconnect power before hardwiring).

Step 1
Draw a straight line with a ruler to keep the mirror horizontal.

Step 2
Drill 2 holes or 4 holes according to the screws you received. (After installing, please tear the protective film of the mirror then to use.)

Step 3
Knock the nail in.

Step 4

1. Tighten the screw to ensure the wall bracket stays sturdy on the wall.
2. Hang the mirror on the wall back.

Step 5
When installing, pay attention to following the direction of the switch (easier to operate) to install.

Step 6
Turn on the power switch.

Specifications And Parameters

Meaning of LED Lights

Troubleshooting

LED doesn’t turn on/Defogging doesn’t work| Open the cover of the power supply on the back of the mirror to test the power cables, and tighten the cables if they are loose. ( Please cut off the power first before testing the power supply and cables)
---|---
Part of the light strip is a fault| Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, need to replace the strip light.
After using it for a few months, the light doesn’t work.| Please contact us to replace the power supply.

For any problems, please feel free to contact us: at slmzgm@163.com.

• Manufacturer: Guang Dong Kosmo Smart Home Devices Co., Ltd.
• Address: No. 65, Linhai North Road, Shatian Town, Dongguan City, Guangdong Province, China.
• Contact us: slmzgm@163.com.
  （Please email us if any questions).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>