WTTY 40×28 Front and Backlit LED Bathroom Mirror User Manual
- June 17, 2024
- WTTY
Table of Contents
Perspective fashion,
super charm
Front & Backlit LED bathroom mirror
User Manual
40×28 Front and Backlit LED Bathroom Mirror
Manufacturer ：Guang Dong Kosmo Smart Home Devices Co., Ltd.
Address: No. 65, Linhai North Road, Shatian Town, Dongguan City,
Guangdong Province, China
Contact us: slmzgm@163.com
( Please email us if any question) ****
Before Installation
Please Note Before Installation:
- Please read all instructions carefully before assembling the item.
- After opening the package, first check if there is transit damage or missing parts.
- Please power the mirror with plug to test the mirror and each functions before installation.
- Assembly by two or more adults is highly recommended.
- Disconnect power before installing, adding or changing any components.
- Ensure that the fixing location is able to take the weight of the complete fittng.
- Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer.
- To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
- Before cleaning the mirror, make sure that the power supply is disconnected.
Please Notes:
Due to the workmanship production process of the items, the size error does
not exceed 1-2 inches.
For any problems, please feel free to contact
us:slmzgm@163.com
Check Functions
Before installation, please check to make sure these functions work properly:
Anti-fog Switch: After connecting the power, the anti-fog function is already
turn on automaticaIly. If you don’t need to use it, just touch it to turn it
off, to prevent wasting energy.
The defogging will take effect within 10 minutes after its turned on , so you
can turn it on 10 minutes before taking a bath.
Dim switch: The led light supports 10% to 100% brightness adjustment, just
long press the button. This button has memory function, the next time you open
the mirror it will be in the same brightness it was in before it was last
closed, which means that you don’t have to touch the button each time.
Color temperature switch: The front and back lights all have three color
temperatures that can be switch (3000K / 4000K/ 6000K ), just need to short
press this button. And this button has a memory function as well.
PACKAGE CONTENTS
YOU MAY NEED THESE TOOLS
Installation Instruction
| Method 1: Plug in | Method 2: Hardwire |
|---|
|
Insert the plug into the socket, keep the voltages between 110V and 120V. If
the voltage exceeds 120V, please use transformer.| Cut the plug, connect the
same color wire and tighten them(Disconnect power before hardwire).
Step 1| Step 2
| 
Draw a straight line with a ruler to keep the mirror horizontal.| Drill 2
holes or 4 holes according to screws you recevied.(After installing, please
tear the protective film of the mirror then to use.)
Step 3| Step 4
|
Knock the nail in.| 1. Tighten the screw to ensure the wall bracket stay
sturdy on the wall.
2. Hang the mirror on the wall backet .
Step 5| Step 6
|
When installing, pay attention to follow the direction of the switch (easier
to operate) to install.| Turn on the power switch.
Specifications and Parameters
Meaning of LED Lights
| State of LED Light | Meaning |
|---|---|
| White Light ON | Function is Working |
| Blue Light ON | Function Standby |
| Light OFF | Power OFF |
Troubleshooting
LED doesn’t turn on / Defogging doesn’t work| Open the cover of the power
supply on the back of the mirror to test the power cables, tighten the cables
if they are loose. ( Please cut off the power firstly before testing the power
supply and cables)
---|---
Part of light strip is fault| Firstly, please pull the outer silicone strip
away and press the inner light strip inward. If it still doesn’t work, need
replace the strip light.
After using for a few month, the light doesn’t work.| Please contact us to
replace the power supply.
For any problems, please feel free to contact us:slmzgm@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>