Needs WS-Q100A 1080P HD Wireless Baby Monitor User Guide
- June 16, 2024
- Needs
Table of Contents
Quick Setup Guide
1080P HD Wireless Baby Monitor
IMPORTANT!:
- Make sure your router is connected to the Internet.
- Make sure your phone is connected to the Wi-Fi network (2.4GHZ) you want to use.
- NOTE: During the installation, you will be asked for your Wi-Fi password.
Double check this. The baby monitor cannot see whether it has been entered correctly or incorrectly. Pay attention to capital letters.
EENVOUDIGE INSTALLATIE EASY SETUP
Step 1 Download
Go to the App Store or Google Play to find and download the “Tuya Smart” app to your supported devices.
https://smartapp.tuya.com/tuyasmart
Or scan the QR code above to download “Tuya Smart” to your Android or Apple device.
Step 2 Register Account
-
Open the TuyaSmart app and select “Register/New account”.
-
Select your country and enteyour e-mail address when prompted for your account number.
-
Accept the general terms and conditions.
-
Get the verification code from the e-mail and enter it..
-
Set your password and click on “continue/done”.
Step 3 Turn the camera on
Turn on the camera with the supplied power cord and place the camera near the router. If you hear “2 beeps”, that means the camera is waiting to connect.
Step 4 Connecting to the network
Connect your phone to 2.4G Wifi! (5G is notsupported) and make sure the router
is connected.
Follow the steps below.
a) Click on understood.
Click on Home data -> Accept Click on Notifications -> Accept (Critical
Notifications – > On) Click on Bluetooth -> Accept
Then click on ‘Continue.
c) Click Add Device.
d) Click on Camera & Lock.
e) Click on Smart Canera (wifi).
f) The baby monitor does NOT need to be reset at for first configuration. Also, you do NOT need to pay attention to the lights. Click on the ‘checkbox and click ‘Next’.
g) Fill in your wifi network name and password (2.4GHZ)
CAUTION: Double check the Wi-Fi password and network name. The app does
not indicate whether this is incorrect or correct. This is because the baby
monitor does not yet know thewifi.
h) Scan the QR code on your mobile with the baby monitor.
At a distance of 15 to 20cm.
When you hear ‘3 beeps’, the configuration is successful. Then click on ‘Hear
a Tone’.
You will find the baby monitor under ‘My Family’ in the app.
i) Turn “Motion Tracking”/”Motion Detection”/”Sound Detection” On by clicking on it.
Installation Failed?
First of all, check that your wifi password and network name are correct, check if your mobile phone is connected to the wifi network and that the wifi network you are trying to connect to is 2.4GHZ. If you cannot solve the problem, please send an e-mail to: ksshopnl@gmail.com. We will answer your question within one working day.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>