Snowdool KM008-RGB2R5171UL RGB LED Bathroom Mirror with Black Frame User Manual

Snowdool KM008-RGB2R5171UL RGB LED Bathroom Mirror with Black Frame User Manual

Before Installation

Please Note Before Installation:

1. Please read all instructions carefully before assembling the item.
2. After opening the package, first check if there is transit damage or missing parts.
3. Please power the mirror with plug to test the mirror and each functions before installation.
4. Assembly by two or more adults is highly recommended.
5. Disconnect power before installing, adding or changing any components.
6. Ensure that the fixing location is able to take the weight of the complete fittng.
7. Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer.
8. To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
9. Before cleaning the mirror, make sure that the power supply is disconnected.

Check Functions

Before installation, please check to make sure these functions work properly:

Anti-fog Switch:

1. After connecting the power, the anti-fog function is already turn on automaticaIly. If you don’t need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after its turned on , so you can turn it on 10 minutes before taking a bath.
2. Auto off after 1 hour.

Front Light Dim Switch:

1. Short press this button to change the color temperature among cold light, white light, warm light and turn on/off the light.
2. Long press this button to adjust the brightness of the light. Dimmable range 20%-100%

RGB Backlight Dimming:

1. Short press this button to change the color among colorful, cold light, white light, warm light, pink, red, green, blue.
2. Long press this button to adjust the brightness of the light.

User Manual

PACKAGE CONTENTS

• Bracket x2

• Wall Anchors x5

• Screws x5

• Plug

• LED Mirror

YOU MAY NEED THESE TOOLS

• Level

• Pencil

• Hammer

• Safety Goggles

• Electric Drill

• Phillips Screwdriver

• Tape Measure

Installation Instruction

Method 1: Plug in

Insert the plug into the socket, keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer.

Method 2: Hardwire

Cut the plug, connect the same color wire and tighten them(Disconnect power before hardwire).

Step 1
Draw a straight line with a ruler to keep the mirror horizontal.

Step 2
Drill 2 holes or 4 holes according to screws you recevied.

Step 3
Knock the nail in.

Step 4

1. Tighten the screw to ensure the wall bracket stay sturdy on the wall.
2. Hang the mirror on the wall backet .

Step 5
When installing, pay attention to follow the direction of the switch (easier to operate) to install.

Step 6
Turn on the power switch

Specifications and Parameters

Product No.| Size| Thickness| Touch
Button| LED
Stripe Model| Color
Temperature| Lumen| CRI| Power(W)| Input
Voltage (V)| Weight
(kg)
---|---|---|---|---|---|---|---|---|---|---
KM008-RGB2R5171UL| 20″X 28″| 1.5″| 3| 5050-60-RGB| RGB| 3647| 90| 60| 100-120V| 6.15
KM008-RGB2R12181UL| 48″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 6656| 90| 150| 100-120V| 13.95
KM008-RGB2R12392UL| 48″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 7164| 90| 150| 100-120V| 15.7
KM008-RGB2R15191UL| 60″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 8161| 90| 150| 100-120V| 18.6
KM008-RGB2R18392UL| 72″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 8941| 90| 150| 100-120V| 22.45
KM008-RGB2R21481UL| 84″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 10300| 90| 150| 100-120V| 25.40

Meaning of LED Lights

Troubleshooting

LED doesn’t turn on / Defogging doesn’t work
Open the cover of the power supply on the back of the mirror to test the power cables, tighten the cables if they are loose. ( Please cut off the power firstly before testing the power supply and cables)

Part of light strip is fault
Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, need replace the strip light.

After using for a few month, the light doesn’t work.
Please contact us to replace the power supply

Manufacturer： Guang Dong Kosmo Smart Home Devices Co., Ltd.
Address: No. 65, Linhai North Road, Shatian Town, Dongguan City, Guangdong Province, China

For any problems, please feel free to contact us: [email protected]

Contact us: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>