Snowdool KM007 RGB LED Bathroom Mirror User Manual
- June 16, 2024
- Snowdool
Table of Contents
Snowdool KM007 RGB LED Bathroom Mirror
Specifications and Parameters
-
Manufacturer: Guang Dong Kosmo Smart Home Devices Co., Ltd.
-
Address: No. 65, Linhai North Road, Shatian Town, Dongguan
City, Guangdong Province, China -
Contact: lyzhan22@163.com
Installation Instruction
- Check Functions:
- Knock the nail in.
- Tighten the screw to ensure the wall bracket stays sturdy on the wall.
- Hang the mirror on the wall bracket.
- When installing, pay attention to follow the direction of the switch (easier to operate) to install.
- Turn on the power switch.
Product Usage Instructions
Meaning of LED Lights
| State of LED Light | Meaning | Function |
|---|---|---|
| White Light ON | Function is Working | |
| Blue Light ON | Function Standby | |
| Light OFF | Power OFF |
Troubleshooting
LED doesn’t turn on / Defogging doesn’t work
Open the cover of the power supply on the back of the mirror to test the
power cables, tighten the cables if they are loose. (Please cut off the power
firstly before testing the power supply and cables)
Part of light strip is faulty
Firstly, please pull the outer silicone strip away and press the inner
light strip inward. If it still doesn’t work, replace the strip light.
Memory function does not work
Please note: only when both the front and backlit are turned on
simultaneously can there be memory function, and only the backlight or front
lights have no memory function.
The light doesn’t work / Power supply issue
After using for a few months, please contact us to replace the power
supply.
FAQ
-
Q: What should I do if the LED lights don’t turn on or the defogging function doesn’t work?
A: Open the cover of the power supply on the back of the mirror to test the power cables, tighten the cables if they are loose. If that doesn’t work, please contact us for further assistance. -
Q: What should I do if part of the light strip is faulty?
A: Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn’t work, you may need to replace the strip light. -
Q: Why is the memory function not working?
A: The memory function only works when both the front and backlit are turned on simultaneously. If only the backlight or front lights are turned on, there is no memory function. -
Q: What should I do if the light doesn’t work or there is a power supply issue?
A: After using for a few months, please contact us to replace the power supply.
For any other problems or inquiries, please feel free to contact us at lyzhan22@163.com.
Before Installation
Please Note Before Installation
- Please read all instructions carefully before assembling the item.
- After opening the package, first check if there is transit damage or missing parts.
- Please power the mirror with plug to test the mirror and each functions before installation.
- Assembly by two or more adults is highly recommended.
- Disconnect power before installing, adding or changing any components.
- Ensure that the fixing location is able to take the weight of the complete fittng.
- Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use transformer.
- To connect the wires to electrical junction box, a qualified technician or electrician is highly recommended.
- Before cleaning the mirror, make sure that the power supply is disconnected.
- To ensure a better luminous effect of the mirror, it is recommended to remove the protective film from the edge of the mirror before use.
- To ensure the agility of the touch screen function, it is recommended to tear the protective film in front of the mirror.
For any problems, please feel free to contact us: lyzhan22@163.com
Check Functions
Before installation, please check to make sure these functions work properly:
Anti-fog Switch:
- After connecting the power, the anti-fog function is already turn on automaticaIly. If you don’t need to use it, just touch it to turn it off, to prevent wasting energy. The defogging will take effect within 10 minutes after its turned on , so you can turn it on 10 minutes before taking a bath.
- Auto off after 1 hour.
Front Light Dim Switch:
- Short press this button to change the color temperature among cold light, white light, warm light and turn on/off the light.
- Long press this button to adjust the brightness of the light. Dimmable range 20%-100%.
RGB Backlight Dimming:
- Short press this button to change the color among colorful, cold light, white light, warm light, pink, red, green, blue.
- Long press this button to adjust the brightness of the light.
Long press the anti fog button, and the indicator lights of the three switches
will not light up. Short press the anti fog button, and the three switch
lights will turn blue again (entering standby mode). In standby mode, press
the corresponding buttons on the mirror to start working.
PS:To ensure the agility of the touch screen function, it is recommended to
tear the protective film.
User Manual
PACKAGE CONTENTS
YOU MAY NEED THESE TOOLS
Installation Instruction
Specifications and Parameters
Product No.
| | | | | | | | ****
W
| ****
| ****
---|---|---|---|---|---|---|---|---|---|---
KM007-RGB1R5070UL| 20″X 28″| 1.5″| 3| 5050-60-RGB| RGB| 3409| 90| 60|
100-120V| 5.55
KM007-RGB1R6080UL| 24″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 4161| 90| 75|
100-120V| 7.10
KM007-RGB1R6090UL| 24″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 4586| 90| 75|
100-120V| 7.80
KM007-RGB1R7090UL| 28″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 4962| 90| 100|
100-120V| 8.55
KM007-RGB1R7691UL| 30″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 5200| 90| 90|
100-120V| 9.95
KM007-RGB1R8181UL| 32″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 5007| 90| 90|
100-120V| 9.50
KM007-RGB1R9090UL| 36″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 5666| 90| 100|
100-120V| 10.95
KM007-RGB1R9696UL| 38″X 38″| 1.5″| 3| 5050-60-RGB| RGB| 6135| 90| 100|
100-120V| 12.55
KM007-RGB1R10060UL| 40″X 24″| 1.5″| 3| 5050-60-RGB| RGB| 4962| 90| 100|
100-120V| 8.60
KM007-RGB1R10076UL| 40″X 30″| 1.5″| 3| 5050-60-RGB| RGB| 5543| 90| 100|
100-120V| 10.80
KM007-RGB1R10080UL| 40″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 5666| 90| 100|
100-120V| 10.95
KM007-RGB1R10091UL| 40″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 6107| 90| 100|
100-120V| 11.53
KM007-RGB1R12080UL| 48″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 6466| 90| 150|
100-120V| 15.20
KM007-RGB1R12176UL| 48″X 30″| 1.5″| 3| 5050-60-RGB| RGB| 6343| 90| 150|
100-120V| 15.93
KM007-RGB1R12191UL| 48″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 6926| 90| 150|
100-120V| 17.15
KM007-RGB1R121100UL| 48″X 40″| 1.5″| 3| 5050-60-RGB| RGB| 7255| 90| 150|
100-120V| 17.93
KM007-RGB1R13975UL| 55″X 30″| 1.5″| 3| 5050-60-RGB| RGB| 7002| 90| 150|
100-120V| 16.40
KM007-RGB1R13991UL| 55″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 7583| 90| 150|
100-120V| 20.13
KM007-RGB1R15070UL| 60″X 28″| 1.5″| 3| 5050-60-RGB| RGB| 7170| 90| 150|
100-120V| 16.55
KM007-RGB1R15076UL| 60″X 30″| 1.5″| 3| 5050-60-RGB| RGB| 7424| 90| 150|
100-120V| 18.88
KM007-RGB1R15090UL| 60″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 7923| 90| 150|
100-120V| 20.45
KM007-RGB1R18181UL| 72″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 8793| 90| 150|
100-120V| 22.30
KM007-RGB1R18191UL| 72″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 9087| 90| 150|
100-120V| 24.70
KM007-RGB1R19591UL| 77″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 9680| 90| 150|
100-120V| 32.21
KM007-RGB1R21380UL| 84″X 32″| 1.5″| 3| 5050-60-RGB| RGB| 9922| 90| 150|
100-120V| 32.51
KM007-RGB1R24091UL| 96″X 36″| 1.5″| 3| 5050-60-RGB| RGB| 11384| 90| 200|
100-120V| 33.13
Please Notes
Due to the workmanship production process of the items, the size error does
not exceed 1-2 inches.
Meaning of LED Lights
| State of LED Light | Meaning |
|---|---|
| White Light ON | Function is Working |
| Blue Light ON | Function Standby |
| Light OFF | Power OFF |
Troubleshooting
LED doesn’t turn on / Defogging doesn’t work| Open the cover of the
power supply on the back of the mirror to test the power cables, tighten the
cables if they are loose. ( Please cut off the power firstly before testing
the power supply and cables)
---|---
Part of light strip is fault| Firstly, please pull the outer silicone
strip away and press the inner light strip inward. If it still doesn’t work,
need replace the strip light.
**** Memory function does not work| Please note: only when both the front and
backlit are turned on simultaneously can there be memory function, and only
the backlight or front lights have no memory function.
After using for a fewmonth, the light doesn’t work.| Please contact us to
replace the power supply.
For any problems, please feel free to contact us: lyzhan22@163.com
Manufacturer：Guang Dong Kosmo Smart Home Devices Co., Ltd. Address: No. 65,
Linhai North Road, Shatian Town, Dongguan City, Guangdong Province, China
Contact us: lyzhan22@163.com （Please email us if
any question)