AERUS G2 Home Filtration System Instruction Manual

: June 17, 2024
: AERUS

AERUS G2 Home Filtration System

Product Information

Specifications

G2:
- Airflow: 344 cfm
- Weight: 27 lbs.
- Power Supply: 120 VAC
- Power Consumption: 125 Watts
- Current: 1.0 amps
- Round Dimensions: 8 inches
- Operating Temperature Range: 30 to 95 degrees Fahrenheit
G2 XL:
- Airflow: 621 cfm
- Weight: 28 lbs.
- Power Supply: 120 VAC
- Power Consumption: 225 Watts
- Current: 1.8 amps
- Round Dimensions: 10 inches
- Operating Temperature Range: 30 to 95 degrees Fahrenheit

Introduction

Congratulations! You have purchased a highly effective air cleaning system that utilizes state-of-the-art HEPA (High Efficiency Particulate Air) technology. Your Aerus HEPA system comes with a limited warranty and with proper care and maintenance, it will provide optimum performance.

If your indoor air has abnormally high concentrations of particulates, the filter media’s lifespan may be shortened. Excessive particulates in the air can reduce the expected life of the HEPA filter. Under normal conditions, the HEPA filter will last from two to five years.

The activated carbon blanket in the system has a finite limit when it comes to adsorbing odors or other gaseous volatile organic compounds (V.O.C.’s). The higher the concentrations, the shorter the expected life of the carbon blanket. Higher humidity levels may also shorten its lifespan. Under normal conditions, the carbon blanket should last 6-12 months, depending on usage.

As dust builds up on the HEPA filter, the airflow through the filter media will decrease, reducing its ability to circulate and clean as much air as when it was new. If you notice a significant reduction in airflow, you can inspect the pre-filter and HEPA filter to determine if they need to be replaced. Regularly replacing (or washing) the pre-filter every 3 months will help extend the life of the HEPA filter.

Product Usage Instructions

Maintenance

Regular maintenance is important to ensure optimal performance of your air purification system. Follow the guidelines below for proper maintenance:

Filter Change Schedule

Refer to the following filter change schedule:

Pre-filter: Every 3 months
HEPA filter: Every 2-5 years under normal conditions
Activated carbon blanket: Every 6-12 months depending on usage and concentrations of odors or gaseous volatile organic compounds (V.O.C.’s)

Filter Changing Guidelines

When changing filters, follow these guidelines:

Ensure that the unit is turned off and disconnected from the power source.
Locate the access panels for the pre-filter, HEPA filter, and activated carbon blanket.
Remove the access panels carefully.
Take out the old filters and dispose of them properly.
Install the new filters, making sure they are properly aligned and securely in place.
Reattach the access panels.
Turn on the unit and check for proper airflow.

Dealer Filter Change Instructions

If you prefer, you can have a qualified technician from an authorized dealer perform the filter change for you. Contact your local dealer for instructions on how to arrange a filter change service.

Replacement Parts

If you need to replace any parts of your air purification system, make sure to use genuine replacement parts from the manufacturer. Using non-genuine parts may affect the performance and void the warranty of the product.

Warranty

Your Aerus HEPA system comes with a limited warranty. Refer to the warranty documentation provided with your product for detailed information on coverage, terms, and conditions.

FAQ

Q: Can I use adapters with this air purification system?

A: No, it is recommended to use a grounded outlet that fits the plug of the system. Do not change the plug or use adapters as it may pose safety risks.

Q: Can I operate the equipment without access panels?

A: No, it is important to always operate the equipment with all access panels in place. Operating without access panels may cause gas fumes from the heating system to be drawn into occupied spaces, posing a risk of carbon monoxide poisoning.

Q: How often should I replace the pre-filter?

A: The pre-filter should be replaced every 3 months to help extend the life of the HEPA filter and maintain optimal performance of the air purification system.

Q: Can I wash the pre-filter?

A: Yes, the pre-filter can be washed. However, it is recommended to replace the pre-filter every 3 months for best results.

Q: Can I use non-genuine replacement parts?

A: It is recommended to use genuine replacement parts from the manufacturer to ensure optimal performance and to avoid voiding the warranty of the product.

Q: How long does the activated carbon blanket last?

A: Under normal conditions, the activated carbon blanket should last 6-12 months, depending on usage and concentrations of odors or gaseous volatile organic compounds (V.O.C.’s).

OWNER’S MANUAL • LIVRET EXPLICATIF

G2 & G2 XL HOME FILTRATION SYSTEMS

Important Safety Instructions

When using an electrical appliance, basic precautions should always be taken. READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFICATION SYSTEM

WARNING
To reduce the risk of fire, electrical shock, or injury:

Use only as described in this manual.
Do not attempt to repair or adjust any of the electrical or mechanical functions. Contact Aerus Customer Service for service information.
Do not use filters other than authorized G2 filters.
Do not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close attention is necessary when operated by or near children.
Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
Do not pull or carry by cord, use cord as a handle, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not allow foreign objects to enter the ventilation or exhaust openings.
Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
Turn off all controls before unplugging.
To avoid electric shock and fire hazards, plug directly into an appropriate electrical outlet (see voltage on unit) using cable provided (beneath unit).
To reduce the risk of electrical shock, this appliance has a grounded plug (with a third prong). This plug will fit in a grounded outlet only one way. If it does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Do not use adapters.
Save These Instructions

Specifications

HEPA filter efficiency = 99.97% @ 0.3 micron particles Ambient temperature range: -40ºF to 130ºF

Introduction

Congratulations! You will quickly realize that you have purchased a very effective air cleaning system. It incorporates state of the art HEPA (High Efficiency Particulate Air) technology.
Your Aerus HEPA system comes with a limited warranty. With proper attention to its care and maintenance, you will receive optimum performance.
If your indoor air has abnormally high concentrations of particulates, the life span of the filter media may be shortened. Excessive particulates in the air will reduce the expected life of the HEPA filter. Under normal conditions the HEPA filter will last from two to five years.
The activated carbon blanket has a finite limit as to the amount of odor or other gaseous volatile organic compounds (V.O.C.’s) that it can adsorb. The higher the concentrations, the shorter the expected life. Higher humidity may shorten the life of the carbon blanket. Under normal conditions, the carbon blanket should last 6-12 months, depending on usage.
The air flow through the HEPA filter media will decrease, as dust builds up on the filter, thus lowering its ability to circulate and clean as much air as when it was new. If the air flow through your unit is noticeably reduced, you can inspect the pre-filter and HEPA filter to see if they should be replaced. Replacement (or washing) of the pre-filter every 3 months will help extend the life of the HEPA filter.
Please contact your local Aerus dealer regarding replacement of filter media, warranty information or if you have any questions or concerns about the performance of your HEPA system.
NOTE: This filtration system is an ADDITIONAL filter, and does NOT replace the existing air handler/furnace system filter.

General Information

Media Filters
Media filters strain particulates from the air. The filter media needs to have tiny holes to allow air to pass through, but not particulates. Filter types vary for all sorts of purposes. The most effective and proven filter media is HEPA. HEPA filter media is 99.97% efficient at capturing particles which are 0.3 micron in size or larger.

Carbon Filters
Carbon media is used to capture chemicals and odors, also referred to as V.O.C.’s. Chemicals and odors cannot be captured with media type filters. Activated carbon collects chemicals and odors in a process called absorption. If air passes through the carbon filter before particulates are removed, the surface of the carbon quickly gets covered with particulates, rendering it ineffective at capturing chemicals and odors. If particulates are removed from the air with a HEPA filter, virtually the entire surface area of the carbon can be used to capture chemicals and odors. This increases the efficiency and filter life of the carbon filter.

Separate HEPA and Carbon Filters

HEPA and carbon filters have different life spans. It is important for a filtration system to keep the filter components independent from each other, so that the filter that is dirty/saturated can be changed. This is more economical than a system where you need to throw out two or three filters when only one needs changing.

The HEPA System’s 3 Stage Filtration Process

The 3 stage filtration process is used to create a very effective filtration system. Each filter is independent and can be changed individually.

Stage 1: Pre-filter – The inexpensive foam pre-filter removes larger particulates from the air, thus prolonging the life of the HEPA filter.
Stage 2: HEPA – The HEPA filter removes 99.97% of particulates 0.3 micron and larger. The cleaned air then passes through the stage 3 filter.
Stage 3: Carbon – The carbon filter is about 1/2 inch thick to give it plenty of surface area for removing chemicals and odors from the air.

Product Application Guidelines

Notes:

Industry experience indicates that one (1) air change per hour generally provides adequate air cleaning. Actual results will depend on multiple factors such as outdoor particulate levels, infiltration rate, indoor activities etc.
Generally speaking, the more air changes per hour provided, the more effective a HEPA system will be. People with sensitivities may desire a higher number of air changes per hour for cleaner air.

Size of House vs. Air Changes

Parts Identification

Filter Parts Identification

Physical Dimensions of Unit

Operation

Make sure that the unit is plugged into a grounded outlet (120 Volt, 60 Hz).
For optimum performance, the HEPA system should run continuously.
Turn the unit on by pressing the on/off switch to the ‘1’ position. The switch should light up when the unit is on.
To turn the unit off, press the on/off switch to the ‘0’ position. The switch light should turn off when the unit is off.

Maintenance

Proper care and maintenance of your HEPA system will ensure years of service. The unit must be turned off during
service/maintenance or when filters are being changed.
It is recommended that gloves and a dust mask be worn during filter replacement.

Filter Change Schedule

Note: Failure to properly maintain your HEPA system will decrease the efficiency and air flow.

Pre-Filter: 3 to 4 months*
HEPA Filter: 2 to 5 years**
Inner Carbon Filter: 6-12 months, depending upon usage

* Pre-filters can be washed and reused
**NOTE: Filter life is based on average air content. Some filters may need to be changed more often due to higher amounts of dust, humidity, or chemicals found in your ambient air. Additionally, people who are more sensitive to these airborne contaminates may desire more frequent filter changes.

Filter Changing Guidelines

Pre-Filter:
Dust and other large particles will collect on the pre-filter over time. The color of the filter will change as particulates build up on the pre-filter. Wash or change the pre-filter every 3-4 months.

HEPA Filter:
As the HEPA filter captures particulates, it will darken over time. Replace the HEPA filter when it darkens to the level seen in example D.

Inner Carbon Filter:
The inner carbon filter will rarely look used. This filter captures odors and gasses, yet the filter’s appearance will not change. When this filter has reached it’s maximum absorbancy of odors and gasses, it will no longer work. Replace this filter when it no longer seems to capture odors, or every 6-12 months, depending upon usage.

Dealer Filter Change Instructions

It is recommended that gloves and a filtered dust mask be worn during filter replacement to avoid breathing particulates (dust, mold, pollen, etc.) captured on the filter that become airborne during the filter(s) changeout.
The old filters should be wrapped and sealed in plastic bags immediately upon removal from the unit to avoid distributing particles throughout the house during the process of disposal.

Accessing the filters
- a. Remove safety screw from HEPA filter access panel.
- b. Unlatch the three retaining clips and lift off HEPA filter access panel.
- c. Bracing the unit so it does not move, turn the HEPA cartridge counter-clockwise and lift/pull out (Note: Carbon, HEPA, and pre-filters are removed as a single unit).
Pre-filter Replacement
- a. Pull the pre-filter up and off the unit.
  NOTE: The pre-filter may contain contaminants, remove it slowly to avoid releasing particles back into the air.
- b. Foam pre-filters can be washed several times, wash by hand in warm water. Let it dry completely before placing it back onto the HEPA cartridge.
- c. If replacing the filter, remove plastic shrink wrap from the new pre-filter.
- d. Stretch the new/washed filter around the top of the HEPA cartridge and slide it down into place
Inner Carbon Filter Replacement
- a. Look inside the HEPA cartridge to locate the two ends of the inner carbon filter.
- b. Pull one end of the old inner carbon filter in and bend it into a loose roll so it can be removed.
- c. Remove the inner carbon filter from the HEPA cartridge.
- d. Remove plastic shrink wrap from the new inner carbon filter.
- e. Unroll the inner carbon filter and roll it up in the opposite direction (this makes the filter follow a more contoured profile against the inner HEPA filter surfaces and helps keep it in place), place the rolled inner carbon filter inside the HEPA cartridge and gently unroll it until the ends ‘butt’ together and the filter is snug against the HEPA filter.
HEPA Filter Replacement
- If replacing the HEPA filter with a new filter, discard old HEPA filter and use new when replacing the HEPA filter into the unit.
- With each annual filter replacement kit, a new ‘o’ ring is provided. The old one is removed by pinching it between two fingers and pulling it off the collar on the blower deck.
- Discard old ‘o’ ring.
- Place the new ‘o’ ring onto the collar and slide it down to the base of the blower deck.
Installing the HEPA Filter Cartridge
- a. With the filters changed or inspected, all 3 filters are ready to be placed back into the unit. Place the HEPA cartridge gently into the unit
- b. When the HEPA cartridge is in place, brace the unit, press down and gently turn it clockwise to lock it into place. If too much force is used, the cartridge may be difficult to remove!
- c. Replace the HEPA filter access panel and latch it with the three retaining clips.
- d. Re-install safety screw(s) into HEPA filter access panel.
- e. Plug the unit back into a power outflow and turn it on.

Replacement Parts

Replacement Parts (Qty.)

Complete Filter Kit (1 Pre-filter, 1 HEPA, 1 Carbon) 48892
Annual Filter Kit ( 1 Pre-filter, 2 Carbon) 48893
HEPA Filter Cartridge (1) 48894
Pre-Filter (1) 48895
Carbon Filter (1) 48896

Use this unit only in the manner intended by the manufacturer. If you have questions, contact Aerus.

Limited Five Year Warranty

What is Covered by this Warranty – Aerus warrants the G2 and G2XL, to the consumer subject to the conditions below, against defects in workmanship or material, provided that the products are returned to an Aerus location within 5 year of date of purchase.
How to Obtain Warranty Service – Upon contacting and returning, at consumer’s sole cost and expense, the product with proof of purchase (including purchase date) to an Aerus location within the above time period, Aerus will repair or replace and return the product, without charge and within a reasonable period of time, if its examination discloses any part to be defective in workmanship or material. If Aerus is unable to repair the product after a reasonable number of attempts, Aerus will provide either a refund of the purchase price or a replacement unit, at Aerus’s option.
What is Not Covered by this Warranty – This product is intended for household use only. Ordinary wear and tear shall not be considered a defect in workmanship or material. These warranties do not apply for loss or damage caused by accident, fire, abuse, misuse, modification, misapplication, commercial use, or by any repairs other than those provided by an authorized Aerus location.
Exclusion of Other Warranties and Conditions – EXCEPT AS PROVIDED HEREIN, AERUS MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND. ALL OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, ARE HEREBY EXPRESSLY
DISCLAIMED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Limitation of Liability for Special, Incidental or Consequential Damages – AERUS SHALL NOT IN ANY CASE BE
LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF EXPRESS OR IMPLIED WARRANTIES, CONDITIONS, GUARANTEES OR REPRESENTATIONS, BREACH OF CONTRACT, NEGLIGENCE OR ANY OTHER LEGAL THEORY. Such excluded damages include, but are not limited to, loss of profits or revenue and loss of the use of the products.
For U.S. Application Only – This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow limitations on warranties, or on remedies for breach. In such states, the above limitations may not apply to you.
For Canadian Application Only – Exclusion of Subsequent Owners: Except as otherwise required by applicable legislation, this warranty is not transferable. This warranty gives you specific legal rights and you may also have other rights which vary from province to province. Some provinces and territories do not allow limitations on warranties, or on remedies for breach. In such provinces or territories, the above limitations may not apply to you.
If any provision of this warranty or part thereof is held by a court of competent jurisdiction to be invalid, illegal or unenforceable, the validity, legality and enforceability of the remaining provisions or parts thereof will not in any way be affected or impaired within the jurisdiction of that court. This entire warranty shall continue to be valid, legal and enforceable in any jurisdiction where a similar determination has not been made.

The Aerus Story

A fresh approach to a familiar idea.

CLEANER AIR THEN – ELECTROLUX
Since 1924, the name Electrolux has been synonymous with the best floor care in homes throughout North America. When it was introduced, its unique design became the standard of excellence almost overnight.
Electrolux, often referred to simply as Lux, also presented a higher measure of customer service. Loyal customers have become repeat customers not only because we have the best products, but also because we follow up with the best customer care. That is why Electrolux/Lux products have been proudly owned and serviced by over 50 million households and businesses.

And from the beginning, Electrolux customers have always been left with more than just clean floors. Their homes were left with cleaner air. Even 80 years ago, our products were helping to eliminate household dust, mold spores, pollen and pet dander. When you think about it, we’ve been cleaning the air in people’s homes for a very long time.

CLEANER AIR TOMORROW – AERUS
After being inside millions of homes and talking with millions of people, we learned quite a bit about how cleaner air creates a healthy living environment. This insight developed into an opportunity for us to evolve from Electrolux to our new company name Aerus. Based on the Greek word for “air,” the name Aerus illustrates our mission to not only make homes cleaner, but to help make the lives of our customers better. Built on the foundation of our Electrolux heritage, Aerus is now positioned to help families live life well.

HEALTHIER LIVING FOREVER

Aerus doesn’t just sell products and services to make homes cleaner. We are helping people take better care of their families. We are creating home environments that are safer, healthier and more inviting. Working with our personable and knowledgeable direct selling team, our customers will learn about new ways of living better. Our mission is to affect lives, not just homes. Along with our innovative new
products, we continue to offer our high-quality floor care products to deliver solutions that you want and need to protect your home. Aerus is focused on building upon that heritage of premium products featuring effective, cutting edge technologies in the indoor wellness space.
Welcome to the next generation of quality products. Aerus is committed to helping you live life well, building on over 8 decades of expertise, service, and trust under our Electrolux and Lux heritage.

For information regarding the use of this product please call our toll-free hotline:
1-800-243-9078 (in U.S.)
1-800-668-0763 (in Canada)

Aerus LLC 5420 LBJ Freeway, Suite 800, Dallas, Texas 75240
Aerus Canada, Inc. 3480 Laird Road, Suite 2-7, Mississauga, Ontario L5L 5Y4
www.aerusonline.com
©2006 Aerus LLC, Aerus™ is a trademark owned by Aerus Concepts, L.P. Electrolux® and Lux® are registered trademarks of Aktiebolaget Electrolux and are licensed for use by Aerus LLC, Aerus Canada, Inc. and their affiliates.