M-XGS31UBSK Series S size Left Hand Wired USB Ergonomic Shape Mouse

Product Information: Wired Mouse

Specifications:

• Compliant model: M-XGS31UBS, M-XGM31UBS, M-XGL31UBS,
  M-XGXL31UBS

• Sizes available: S, M, L, XL

Precautions:

This manual describes the necessary precautions you should take
for safe operation of this product. Observe these precautions
carefully to avoid personal injury, damage, fire, and other
problems.

Meaning of Symbols:

• WARNING: Failure to observe precautions
  carries the possibility of serious personal injury or death due to
  fire, electric shock, or other causes.

• CAUTION: Failure to observe precautions may
  result in personal injury due to electric shock or other causes,
  and may damage other equipment.

Prohibited Actions:

WARNING| Mandatory Action| Situation that needs attention| Notes and reference information
---|---|---|---
If a foreign object (water, metal chips) enters this
product| Stop using immediately and remove it from the connected
device.| Continuing to use the product as it is may cause a fire or
electric shock.|
If the product is working abnormally| Stop using it immediately and shut down the connected
device.| After verifying that the product has cooled down and will not
cause burns, remove the batteries from this product. Afterwards,
please contact your dealer.| Continuing to use the product as it is may cause a fire or
electric shock.
Do not drop or hit this product| Stop using it immediately and remove this product from the
connected device.| Please contact your dealer.| Fires or electric shocks may occur if this product is used when
damaged.
Do not attempt to disassemble, modify or repair this
product| | | Doing so may cause a fire, electric shock, or product damage.
Malfunctions are not covered under the warranty.
Do not put this product in fire| | | Breakage may cause fire or injury.
Please do not remove or connect the USB connector with wet
hands| | | In addition, do not modify or forcibly bend the product. It can
cause a fire or electric shock.

CAUTION:

• Do not place this product in any of the following
  environments:

  • In a car exposed to sunlight or a place exposed to direct
    sunlight.

  • In a place that becomes hot, such as around a heater.

  • In a moist place or a place where condensation may occur.

  • In an uneven place or a place exposed to vibration.

  • In a place where a magnetic field is generated (such as near a
    magnet.)

  • In a dusty place.

• This product does not have a waterproof structure. Use or store
  in a place not exposed to liquids such as water. Any liquid such as
  rain, water spray, juice, coffee, steam, and sweat, may cause this
  product to breakdown.

Cleaning this product:

If the body of this product becomes dirty, wipe with a soft, dry
cloth. Using a volatile liquid such as paint thinner, benzene or
alcohol may affect the material quality and/or discolor this
product.

Disinfection:

Gently soak a cleaning cloth, such as a microfiber cloth, in the
disinfectant solution. Make sure there are no loose droplets and
gently wipe the product using the cloth. After wiping, dry
thoroughly and wipe off any residual liquid. Do not spray any
liquid onto the product directly. Doing so can cause electric
malfunctions.

FAQ:

Q: Can I use this mouse with a laptop?

A: Yes, you can use this wired mouse with any device that has a
USB port, including laptops.

Q: Is this mouse compatible with Mac computers?

A: Yes, this mouse is compatible with both Windows and Mac
computers.

Q: How do I change the DPI settings on this mouse?

A: To change the DPI settings, please refer to the user manual
or software provided with the mouse. The method may vary depending
on the specific model.

Q: Can I use this mouse on a glass surface?

A: It is recommended to use this mouse on a non-reflective and
non-transparent surface for optimal performance. Glass surfaces may
affect the tracking accuracy.

Wired Mouse
M-XGS31UBSK series (S size) M-XGM31UBSK series (M size) M-XGL31UBSK series (L size) M-XGXL31UBSK series (XL size)
User Manual
Compliant model: M-XGS31UBS, M-XGM31UBS, M-XGL31UBS, M-XGXL31UBS
Precautions
This manual describes the necessary precautions you should take for safe operation of this product.

Observe these precautions carefully to avoid personal injury, damage, fire, and other problems.
Meaning of symbols
WARNING
Failure to observe precautions carries the possibility of serious personal injury or death due to fire, electric shock, or other causes.
CAUTION
Failure to observe precautions may result in personal injury due to electric shock or other causes, and may damage other equipment.
Prohibited action Mandatory action Situation that needs attention Notes and reference information
WARNING
If a foreign object (water, metal chips) enters this product, stop using immediately and remove it from the connected device. Continuing to use the product as it is may cause a fire or electric shock.
If the product is working abnormally, such as heating up, generating smoke, or giving off a strange smell, stop using it immediately and shut down the connected device. After verifying that the product has cooled down and will not cause burns, remove the batteries from this product. Afterwards, please contact your dealer. Continuing to use the product as it is may cause a fire or electric shock.
Please do not drop or hit this product. If this product is damaged, stop using it immediately and remove this product from the connected device. Afterwards, please contact your dealer. Fires or electric shocks may occur if this product is used when damaged.
Do not attempt to disassemble, modify or repair this product. Doing so may cause a fire, electric shock, or product damage. Malfunctions are not covered under the warranty.

Do not put this product in fire. Breakage may cause fire or injury.
Please do not remove or connect the USB connector with wet hands. In addition, do not modify or forcibly bend the product. It can cause a fire or electric shock.
CAUTION
Do not place this product in any of the following environments: In a car exposed to sunlight or a place exposed to direct sunlight. In a place that becomes hot, such as around a heater. In a moist place or a place where condensation may occur. In an uneven place or a place exposed to vibration. In a place where a magnetic field is generated (such as near a magnet.) In a dusty place.
This product does not have a waterproof structure. Use or store in a place not exposed to liquids such as water. Any liquid such as rain, water spray, juice, coffee, steam, and sweat, may cause this product to breakdown.
Please do not use this product for anything other than as a mouse for PCs or game consoles. Do not use this product with any device that may significantly be affected in the case of this product malfunctioning. If this product is used on a transparent surface such as glass or a highly reflective surface such as a mirror, the optical sensor will not function correctly and the mouse cursor movement will become unstable. If the mouse is not used for one month or more, remove the mouse from the PC. Please note that looking directly into the sensor light may hurt your eyes. When you wish to dispose of this product, be sure do so in accordance with the local ordinances and laws of your area.
Cleaning this product
If the body of this product becomes dirty, wipe with a soft, dry cloth.
Using a volatile liquid such as paint thinner, benzene or alcohol may affect the material

quality and/or discolor this product.
Please note the following for disinfection.
Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets and gently wipe the product using the cloth. After wiping, dry thoroughly and wipe off any residual liquid. Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.
IMPORTANT
Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.
Do not use organic solvents or ultraviolet lights. Usage can result in deterioration of the housing components or paints, which can cause damage to the exterior.
We recommend the usage of disposable gloves.
Please unplug the USB connector from the PC.
When using any alcohol-based products, please check that it is appropriate for the specific purpose and that it is used properly.
Please note that in the event that damage or abnormal operation to the product is caused by the cleaning process, the customer will be fully responsible for the cost of repair.
We recommend that you disinfect your hands before and after using PCs and peripheral devices that are used by multiple people in order to prevent the spread of infection through the equipment.
Please turn off any connected devices. Please turn off connected devices when in sleep or hibernation mode. * Please unplug the AC adapter and power cable from the power outlet.

How to use
Items included in this package
The following are included in this package. Verify the package to ensure all items are accounted for prior to using this product. While every effort has been made to ensure proper packaging, in the event that any shortage or damage is discovered, please contact the retailer where the product was purchased. Mouse (cable length: approximately 1.5 m / 5 ft) x 1
Name and function of each part

• This manual uses illustrations of the “M-XGM31UBS” series for explanation.
  Left button To left click on your PC. Right button To right click on your PC.
  This mouse is designed for the left hand. The button on the right is the default “left click”. To swap the left-click and right-click buttons, “Change OS settings (swap left-click and right-click buttons)” or use the function assignment feature on “ELECOM Mouse Assistant”. *Swapping of left-click and right-click buttons is not supported on Android.

How to change OS settings (swap left-click and right-click buttons) Windows Mac Chrome OS How to install ELECOM Mouse Assistant Windows Mac Wheel Rotate forward and backward or click like a button to operate your PC. “Back” button Perform the “Back” function on the Web browser. “Forward” button Perform the “Forward” function on the Web browser.
You will need to install the “ELECOM Mouse Assistant Mac version” from our website to use the “Back” and “Forward” button on Mac. Please refer to “Install ELECOM Mouse Assistant”. Optical sensor The LED will light up blue when the power is on. This sensor will detect mouse movements when you move the mouse. * Please note that looking directly into the sensor light may hurt your eyes. USB connector (male) Connects to the PC USB-A port
Connecting and setting up the mouse

Windows®
Connecting to a PC

1. Start up a PC. Please wait until your PC has started up and can be operated.
2. Plug the USB connector into the USB-A port on a PC.
   You may use any USB-A port. Do not pull or bend the cable using excessive force. A fire or electric shock may result from broken wires. Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector.
   Removing the mouse This product supports hot plugging. You can remove the mouse even when the PC is running. 3) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse. By downloading and installing the “ELECOM Mouse Assistant” from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse Assistant”.

Swap left-click and right-click buttons
The left-click and right-click buttons can be swapped on your PC. *If the OS setting is changed, the left-click and right-click buttons will also be swapped for other mice used simultaneously on the same PC. Use the function assignment feature on ELECOM Mouse Assistant to swap the buttons on this product only. “Install ELECOM Mouse Assistant” For Windows 11 1) Click “Start” at the bottom of the screen and click “Settings”. The “Settings” page will appear. 2) Click “Bluetooth & devices” and then click “Mouse”.
3) Click the “Primary mouse button” dropdown menu, then click “Right”.

Once you click “Right”, the left and right mouse buttons will be swapped.

When “Left” is selected
Left click

When “Right” is selected
Left click

For Windows 10 1) Open “Mouse” properties. From the Start menu, click the Settings icon, select “Devices”, then “Mouse”. 2) Click the “Select your primary button” dropdown menu, then click “Right”.

Once you click “Right”, the left and right mouse buttons will be swapped.

When “Left” is selected
Left click

When “Right” is selected
Left click

Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear.

2. Click on “Bluetooth & devices” and then “Mouse”.
3. Adjust the “Mouse pointer speed” slider bar to adjust the mouse pointer movement speed.
   For Windows 10 1) Open “Mouse” properties. From the Start menu, click the Settings icon, select “Devices” “Mouse”, then click “Additional mouse options” under “Related settings”. 2) Select the “Pointer Options” tab. 3) Adjust the “Select a pointer speed” slider bar to adjust the mouse pointer
   movement speed.

Change the number of lines scrolled in one wheel turn
For Windows 11 1) Click on “Start” on the bottom of the screen and click on “Settings”. The “Settings” page will appear.
2) Click on “Bluetooth & devices” and then “Mouse”.

3. Adjust the “Lines to scroll at a time” slider bar to adjust the number of lines per scroll.
   For Windows 10 1) Open “Mouse” properties. From the Start menu, click the Settings icon, select “Devices” “Mouse”, then click “Additional mouse options” under “Related settings”. 2) Select the “Wheel” tab. 3) Change the value of “The following number of lines at a time” under “Roll the
   wheel one notch to scroll”

Mac
Connecting to a PC

1. Start up a PC. Please wait until your PC has started up and can be operated. 2) Plug the USB connector into the USB-A port on a PC.
   You may use any USB-A port.

For terminals that do not have a USB-A port, such as a MacBook, use the USB TypeC® hub.
Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector. Removing the mouse This product supports hot plugging. You can remove the mouse even when the PC is running. 3) The driver will be automatically installed, and you will then be able to use the mouse. You can now use the mouse.
By downloading and installing the “ELECOM Mouse Assistant” from our company website, functions such as button assignment function and presentation mode can be used. Please proceed to “Install ELECOM Mouse Assistant”.
Swap left-click and right-click buttons

The left-click and right-click buttons can be swapped on your PC. *If the OS setting is changed, the left-click and right-click buttons will also be swapped for other mice used simultaneously on the same PC. Use the function assignment feature on ELECOM Mouse Assistant to swap the buttons on this product only.”Install ELECOM Mouse Assistant” 1) Click “Mouse” under “System Settings”. The “Mouse” settings page will load.
2) Click the “Secondary Click” dropdown menu, then click “Click Left Side”.

Once you click “Click Left Side”, the left and right mouse buttons will be swapped.

When “Click Right Side” is selected

When “Click Left Side” is selected

Left click

Left click

Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. 1) Click “Mouse” under “System Settings”. The “Mouse” settings page will load up.

2. Adjust the “Tracking speed” slider to adjust the speed of the mouse pointer.
   Unchecking “Natural scrolling” will cause the scroll direction to be reversed.
   ChromeOS
   Connecting to a PC

3. Start up a PC. Please wait until your PC has started up and can be operated.

4. Plug the USB connector into the USB-A port on a PC.
   You may use any USB-A port. For devices that do not have a USB-A port, please use a USB Type-C® hub.
   Ensure that the connector is correctly oriented to the port. If there is strong resistance when inserting, check the shape and orientation of the connector. Forcibly inserting the connector may damage the connector, and there is a risk of injury. Do not touch the terminal portion of the USB connector. Removing the mouse This product supports hot plugging. You can remove the mouse even when the PC is running.

5. The driver will be automatically installed, and you will then be able to use the mouse.
   You can now use this product.
   Swap left-click and right-click buttons
   The left-click and right-click buttons can be swapped on your PC. *If the OS setting is changed, the left-click and right-click buttons will also be swapped for other mice used simultaneously on the same PC. 1) Click on the quick settings panel at the bottom right. 2) Click on “Settings”. The settings page will appear.

6. Click on “Mouse and touchpad” under “Device”.

7. Click the “Swap primary mouse button” dropdown menu, then click “Right button”.

Once you click the “Right button”, the left and right mouse buttons will be swapped.

When “Left button” is selected

When “Right button” is selected

Left click

Left click

Change the mouse pointer speed
Adjust the mouse pointer movement speed on your PC if the mouse pointer moves too fast or too slow. 1) Click on the quick settings panel on the bottom right. 2) Click on “Settings”. The settings page will appear.
3) Click on “Mouse and touchpad” under “Device”.

4. Adjust the “Mouse speed” slider to adjust the speed of the mouse pointer.
   Install ELECOM Mouse Assistant
   To use the function assignment function, fast scroll function and presentation mode with this product, the ELECOM Mouse Assistant must be installed. “ELECOM Mouse Assistant” is a software that allows you to use the mouse more effectively. Using ELECOM Mouse Assistant, users can set the functions they want to the unique buttons and use them to perform the operations they want. Get ELECOM Mouse Assistant Please visit our homepage below and download the latest version of the application. > The download page is here.

Specifications
Connector type Compatible models Supported OS
Sensor Resolution Read method Buttons Number of wheels Power source Rated voltage Dimensions (W x D x H)
Cable length Size category
Weight

USB-A connector
USB port-equipped Windows OS, macOS, and ChromeOS devices
Windows 11, Windows 10, macOS Ventura 13, ChromeOS Update for each new version of the OS or the installation of a service pack might be required.
2000 DPI
BlueLED
5 including wheel button
1
USB bus power
5 V
M-XGS31UBS series: approximately 71 × 108 × 52 mm / 2.8 × 4.3 × 2.1 in. M-XGM31UBS series: approximately 75 × 114 × 55 mm / 3 × 4.5 × 2.2 in. M-XGL31UBS series: approximately 79 × 120 × 58 mm / 3.1 × 4.7 × 2.3 in. M-XGXL31UBS series: approximately 82 × 126 × 61 mm / 3.2 × 5 × 2.4 in.
Approximately 1.5 m / 5 ft
M-XGS31UBS series: S size M-XGM31UBS series: M size M-XGL31UBS series: L size M-XGXL31UBS series: XL size
M-XGS31UBS series: approximately 95 g / 3.4 oz M-XGM31UBS series: approximately 105 g / 3.7 oz M-XGL31UBS series: approximately 115 g / 4.1 oz

Operating environment conditions
Storage environment conditions

M-XGXL31UBS series: approximately 125 g / 4.4 oz * including cable
Temperature: 5 °C to 40 °C / 41 °F to 104 °F; humidity: up to 90 % RH (without condensation)
Temperature -10 °C to 60 °C / 14 °F to 140 °F; humidity: up to 90 % RH (without condensation)

Troubleshooting
When disinfecting the mouse
IMPORTANT
Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions. Never apply hot water. Doing so can cause electric malfunctions. Do not use organic solvents or ultraviolet lights. Usage can result in deterioration of the housing components or paints, which can cause damage to the exterior.
We recommend the usage of disposable gloves.
Please unplug the USB connector from this product and the PC.
When using any alcohol-based products, please check that it is appropriate for the specific purpose and that it is used properly. Please note that in the event that damage or abnormal operation to the product is caused by the cleaning process, the customer will be fully responsible for the cost of repair.
We recommend that you disinfect your hands before and after using PCs and peripheral devices that are used by multiple people in order to prevent the

spread of infection through the equipment.
Gently soak a cleaning cloth, such as a microfiber cloth, in the disinfectant solution. Make sure there are no loose droplets and gently wipe the product using the cloth. After wiping, dry thoroughly and wipe off any residual liquid. * Do not spray any liquid onto the product directly. Doing so can cause electric malfunctions.
When the mouse is not working properly
Try the following if the mouse operates abnormally. Please restart the connected device. This product may become unstable depending on the condition of the connected device. Please restart the connected device.
Please uninstall mouse drivers and configuration utilities other than this product for connected devices.
If the mouse you were using before this product used the manufacturer’s original driver or configuration utility, please uninstall it in advance. If third-party drivers are installed, this product may not work properly. For instructions on how to uninstall, please refer to the instruction manual for your mouse that you have been using until now.
Update the OS of the connected device to the latest version. If the OS version of the connected device is outdated, the mouse may become unstable. Please update to the latest version.
Check the energy saving settings on the connected device. (When using Windows® PC)
With Windows, in order to reduce power consumption depending on the PC, the power of the product to be connected to the USB is set to turn off automatically. You can change the settings in the following ways:
For Windows 11 1) Click the “Start” button at the bottom of the screen.

2. Click “All apps”.

3. Click “Windows Tools”. The “Windows Tools” screen will appears.

4. Double-click “Control Panel”. 5) Click “System and Security”.

5. Click “Power Options”. 7) Click “Change plan settings” to the right of the item selected in “Power Plan”. 8) On the “Edit Plan Settings” screen, click “Change advanced power settings”.

6. On the “Power Options” screen, click the “+” mark in “USB settings” from the list, and then click the “+” mark in “USB Selective Suspend Settings”.

7. In the drop box next to “Settings”, select “Disable”. If you are using a laptop, there are two items instead of “Settings”: “On battery” and “Plugged in”. In that case, please set the “Plugged in” setting to “Disable”.

8. Click “OK” to confirm the settings. 12) Click the “X” (close) in the upper right corner to close “Edit Plan Settings”. For Windows 10 1) Right-click the Start button at the bottom left of the screen, click “Power Options”, and then click “Additional power settings” under “Related settings” on the right side of the “Power & sleep” screen. 2) Click “Change plan settings” on the right side of the item selected in “Power Plan”.

9. On the “Edit Plan Settings” screen, click “Change advanced power settings”.

10. On the “Power Options” screen, click the “+” mark in “USB settings” from the list, and then click the “+” mark in “USB Selective Suspend Settings”.

11. In the drop box next to “Settings”, select “Disable”. If you are using a laptop, there are two items instead of “Settings”: “On battery” and “Plugged in”. In that case, please set the “Plugged in” setting to “Disable”.

12. Click “OK” to confirm the settings. 7) Click the “X” (close) in the upper right corner to close “Edit Plan Settings”.
    Compliance status
    Model/: M-XGXL31UBS www.elecom.co.jp/global/certification/
    China / EU Korea / Taiwan / UK US Vietnam / Vit Nam
    Intellectual property rights

ELECOM CO., LTD. owns the copyright to this manual. All products and company names on this product and the package are trademarks or registered trademarks of their respective owners. Duplicating and transferring this document in part or whole is prohibited. Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. macOS is a trademark of Apple Inc., registered in the U.S. and other countries and regions. ChromeOS and Chromebook are trademarks of Google LLC. USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Support information
ELECOM CO., LTD.
Fushimimachi 4-1-1, Chuo-ku, Osaka City
Go to Global Site
Global Support
Please contact the shop where you purchased this product if you have any feedback or questions about the contents of this manual. Specifications and external appearance of this product may be changed without prior notice for the purpose of product improvement. ELECOM is not responsible for any damages to, or failure of other devices caused by using this product. The images are for illustration purposes only and may differ from your actual product. When exporting this product, check the export regulations for the country of origin.
A customer who purchases outside Japan should contact the local retailer in the country of purchase for enquiries. In “ELECOM CO., LTD. (Japan)”, no customer support is available for enquiries about purchases or usage in/from any countries other than Japan. Also, no foreign language other than Japanese is available. Replacements will be made under stipulation of the ELECOM warranty.
Bei Fragen zum Inhalt dieses Handbuchs wenden Sie sich bitte an das Geschäft, in dem Sie dieses Produkt erworben haben.

Die technischen Daten und das äußere Erscheinungsbild dieses Produkts können zum Zweck der Produktverbesserung ohne vorherige Ankündigung geändert werden. ELECOM haftet nicht für Schäden oder Ausfälle an anderen Geräten, die durch die Verwendung dieses Produkts verursacht werden. Die Abbildungen dienen nur der Veranschaulichung und können vom tatsächlichen Produkt abweichen. Prüfen Sie bei der Ausfuhr dieses Produkts die Ausfuhrbestimmungen für das Herkunftsland.
Ein Kunde, der außerhalb Japans kauft, sollte sich für Rückfragen an den örtlichen Händler im jeweiligen Erwerbsland wenden. Bei ,,ELECOM CO., LTD. (Japan)” steht, außer in Japan, kein Kundendienst für Anfragen zum Kauf oder zur Verwendung in/aus anderen Ländern zur Verfügung. Zudem ist keine andere Fremdsprache als Japanisch verfügbar. Ersatz wird im Rahmen der ELECOM- Garantie geleistet.
Por favor, póngase en contacto con la tienda en la que adquirió este producto si tiene algún comentario o pregunta sobre el contenido de este manual. Las especificaciones y la apariencia externa de este producto pueden modificarse sin previo aviso con el fin de mejorar el producto. ELECOM no se hace responsable de los daños o fallos de otros dispositivos causados por el uso de este producto. Las imágenes son solo para fines ilustrativos y pueden diferir del producto real. Al exportar este producto, compruebe la normativa de exportación del país de origen.
Los clientes que compran fuera de Japón deben ponerse en contacto con el distribuidor local del país de compra para realizar consultas. En “ELECOM CO., LTD. (Japón)”, no se brinda servicio de atención al cliente para consultas sobre compras o uso en/desde otros países que no sean Japón. Además, no está disponible ninguna otra lengua extranjera que no sea el japonés. Los reemplazos se efectuarán bajo la estipulación de la garantía de ELECOM.
Veuillez contacter le magasin où vous avez acheté ce produit si vous avez des commentaires ou des questions sur le contenu de ce manuel. Les spécifications et l’aspect extérieur de ce produit peuvent être modifiés sans préavis dans le but d’améliorer le produit. ELECOM n’est pas responsable des dommages ou des défaillances d’autres appareils causés par l’utilisation de ce produit.

Les images sont fournies à titre d’illustration uniquement et peuvent différer du produit réel. Lorsque vous exportez ce produit, vérifiez les réglementations d’exportation du pays d’origine.
Un client qui achète hors du Japon doit contacter le détaillant local du pays d’achat pour toute question. Chez « ELECOM CO., LTD. (Japon) », aucun support client n’est disponible pour les questions relatives aux achats ou à l’utilisation dans/à partir de tout pays autre que le Japon. De même, aucune langue étrangère autre que le japonais n’est disponible. Les remplacements seront effectués conformément aux dispositions de la garantie ELECOM.
Entre em contato com a loja onde você comprou este produto se tiver alguma sugestão ou dúvida sobre o conteúdo deste manual. As especificações e aparência externa deste produto podem ser alteradas sem aviso prévio para fins de melhoria do produto. A ELECOM não é responsável por quaisquer danos ou falhas de outros dispositivos causados pelo uso deste produto. As imagens são apenas para fins ilustrativos e podem diferir do produto real. Ao exportar este produto, confira os regulamentos de exportação para o país de origem.
Um cliente que compra fora do Japão deve entrar em contato com o revendedor local no país de compra para obter informações. Na “ELECOM CO., LTD. (Japão) “, nenhum suporte ao cliente está disponível para consultas sobre compras ou uso em/de quaisquer outros países além do Japão. Além disso, nenhum outro idioma estrangeiro está disponível além do japonês. As trocas serão feitas sob estipulação da garantia ELECOM.
ELECOM
“ELECOM CO., LTD.” ELECOM

ELECOM
ELECOM CO., LTD.(Japan) ELECOM
. . . . , .
. `ELECOM CO., LTD.()’ . . ELECOM .

References

• ELECOM Global | エレコム株式会社
• ELECOM Mouse Assistant - ELECOM Global | エレコム株式会社
• Support| ELECOM GLOBAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>