ASUS 90MP03Z0 ROG Harpe Ace Mini Mouse Gaming User Guide

ASUS 90MP03Z0 ROG Harpe Ace Mini Mouse Gaming

Product Information

Specifications

• Model: P716
• Resolution: DPI 1: 100 DPI to 42000 DPI, DPI 2: 400 DPI, DPI 3 (Default): 800 DPI, DPI 4: 1600 DPI, 3200 DPI

Product Usage Instructions

Connecting Your Gaming Mouse
To set up your gaming mouse as a wired mouse:

1. Connect your gaming mouse to your computer using the bundled cable and a USB port on your computer.

To set up your gaming mouse as an RF wireless mouse:

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Updating the Firmware and Customization

1. Download and install the Armoury Crate software from https://rog.asus.com.
2. Follow the software instructions to update your gaming mouse and dongle’s firmware.
3. Customize your gaming mouse using Armoury Crate.

Using the DPI On-The-Scroll Tuning Function
The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate.

1. Press and hold the DPI button for 3 seconds until the LED on your gaming mouse lights up.
2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
3. Press the DPI button once you have finished customizing the DPI value to save the changes made.

FAQ

• How do I reset my gaming mouse?
  To reset your gaming mouse, hold Left-click button + Right-click button + Scroll wheel + DPI button for 3 seconds. The Scroll LED will blink red until the reset is complete.

• Can I customize the DPI settings of my gaming mouse?
  Yes, you can customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI On-The-Scroll tuning function.

• What should I do if my gaming mouse does not pair correctly?
  If your gaming mouse does not pair correctly, ensure that the connection switch is set to the correct mode (wired or wireless) and follow the pairing instructions provided in the manual.

Package Contents

Mouse Features

1. Left-click button
2. Scroll wheel
3. Right-click button
4. Forward button
5. Backward button
6. Mouse feet
7. USB Type-C® connector
8. DPI button
9. Pairing button
10. USB dongle
11. Optical sensor
12. Connection mode switch

Profile switching

Onboard settings adjustment

combination is held down until the reset is complete. The scroll LED will blink green once the reset is complete.
Polling rate level switch| Pairing button + Backward button| Cycles through the following polling rates: 25 (red) / 250 (purple) / 500 (blue, BT not supported) / 1000 Hz (green, BT not supported) / 2000 Hz (yellow, with polling booster, BT not supported) / 4000 Hz (blue-green, with polling booster, BT not supported) /

8000 Hz (white, with polling booster*, BT not supported)

* **Polling Rate Booster must be purchased separately.**

Sensor Lift-off-distance level switch| Pairing button + Forward button| Cycles through the following lift-off-distances: Low (red, default) / High (purple)

Specifications

Resolution| DPI 1| DPI 2| DPI 3 (Default)| DPI 4
---|---|---|---|---
100 DPI to 42000 DPI| 400 DPI| 800 DPI| 1600 DPI| 3200 DPI

• You may customize the DPI settings for DPI 1-4 through Armoury Crate or the DPI On-The-Scroll tuning function.

Connecting your gaming mouse

Setting up your gaming mouse as a wired mouse
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and a USB port on your computer.

Setting up your gaming mouse as a RF wireless mouse

1. Connect the USB dongle to a USB port on your computer.
2. Set the connection switch to the RF 2.4G Wireless mode.

Setting up your gaming mouse as a Bluetooth® wireless mouse
Set the connection switch to the Bluetooth® mode.

Pairing Bluetooth® mode to additional host devices (max. 3)

1. Set the connection switch to the Bluetooth® mode.
2. Press and hold the Pairing button for 3 seconds until the LED on your gaming mouse start to blink blue. Once your gaming mouse has been successfully paired, the LED indicator on your gaming mouse will light up blue for 3 seconds.

Updating the firmware and customization

1. Connect your gaming mouse to your computer using the bundled cable, then connect the USB dongle to a USB port.
2. Download and install the Armoury Crate software from https://rog.asus.com
3. Follow the software instructions to update your gaming mouse and dongle’s firmware.
4. Customize your gaming mouse using Armoury Crate.

Using the DPI On-The-Scroll tuning function

The DPI On-The-Scroll tuning function allows you to customize the DPI of your gaming mouse without using Armoury Crate.

1. Press and hold the DPI button for 3 seconds until the LED on your gaming mouse light up.
2. Scroll the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your mouse will differ depending on the DPI adjustment.
3. Press the DPI button once you have finished customizing the DPI value to save the changes made.

Notices

Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement. This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRDPARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.

The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels.

The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/eot/ea/fccid after searching on FCC ID: XW3DKMSP716 / MSQMPDONGLE1

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:.

• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Accessories that came with this product have been designed and verified for use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the ISED Specific Absorption Rate (“SAR”) limits when operated in portable exposure conditions.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at https://esg.asus.com/Compliance.htm.

ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to https://esg.asus.com/en/Takeback.htm for detailed recycling information in different regions.

Proper disposal

• DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for the disposal of electronic products.
• DO NOT throw the device in fire. DO NOT short-circuit the contacts. DO NOT disassemble the device.

Lithium-Ion Battery Warning
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

UKCA RF Output table (The Radio Equipment Regulations 2017)

CE RED RF Output table (Directive 2014/53/EU)

Simplified UKCA Declaration of Conformity:
ASUSTek Computer Inc. hereby declares that this device complies with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA Declaration of conformity is available at https://www.asus.com/support/.

CE Mark Warning
ASUSTeK Computer Inc. hereby declares that this device complies with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support

Service and Support
Visit our multi-language website at https://www.asus.com/support/.

• Manufacturer ASUSTeK COMPUTER INC.
• Address, City 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112
• Authorized Representative in Europe ASUS COMPUTER GmbH
• Address Harkortstrasse 21-23, 40880 Ratingen
• Country Germany
• Authorized Representative in United Kingdom ASUSTEK (UK) LIMITED
• Address 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL, England
• Country United Kingdom.

References

• Official Support | ASUS Global
• ASUS Global
• Официальная служба поддержки | ASUS России
• ASUS в СНГ
• ROG - Republic of Gamers｜Global | For Those Who Dare
• ROG官网 - ROG玩家国度｜ROG官方网站 | 只为超越
• Official Support | ASUS Global

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>