HARZHI iPad photo booth Portable Photo Booth Compatible with Ipad 12.9in User Guide

HARZHI iPad photo booth Portable Photo Booth Compatible with Ipad 12.9in

Attention

1. Before using, please check whether the cables are damaged or stuck.
2. Don’t shake too much.
3. Place on level ground.
4. Assemble the Fixed Plate well to prevent the iPad gets damaged.
5. Children must be accompanied by an adult.
6. Please take off the footcups when putting the photo booth into the flight case for transportation.

Component Introduction

The attachments received are subject to

installation Guide

1. Step 1: Open the Simple Flight Case
2. Step 2: Assemble the base using an Allen wrench
3. Step 3: Install Foot Cups
4. Step 4: Insert cable through Ring Light Bracket and plug to Body
5. Step 5: Fix the Ring Light Bracket with a screwdriver
6. Step 6: Install the Cable Holder
7. Step 7: Open the door and plug the cable
8. Step 8: Remove the back plate on the Swivel Bracket and install it to the Ring Light Bracket
9. Step 9: Adjust the knob to control the tightness
10. Step 10: Install the other part of the Swivel Bracket to the back of the Panel
11. Step 11: Fix your iPad on the Panel with a Fixed Plate
12. Step 12: Put on the back
13. Step 13: Install the Panel to Ring Light Bracket and screw it up
14. Step 14: Install the screw
15. Step 15:Plug the cable on Panel
16. Step 16: Plug the cable for power and ring light

Functions of RF Controller

Light Control via Chacktok

1. Download Chacktok from the App Store/Google Play Store
2. Register and select iPad Photo Booth Mode, After selecting photo template, you will get into the camera mode.
3. Select Light Control at the top and connect to your Photo Booth. Light control function would be available

Attention: Open Chacktok, go to ME-FREE VIP, and Enter the code to get 2 months of free VIP

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>