AKUMAKA B0CPY8QPZF 1.85 Inch HD Smart Watches Instruction Manual

INSTRUCTION MANUAL

Thank you for purchasing our products . Please review this manual thoroughly before operating your device

Watch specifications

Packing List

Charge

Insert the USB plug of the charging cable into the USB charger Connect the other end to the charging contacts on the back of the watch.

INSTRUCTION FOR QUICK USE

ON/OFF

1. Power-on operation: Press and hold the right button for three seconds to power on.
2. Power-off operation: When the screen is on, press and hold for three seconds to enter the shutdown interface, select and confirm to power off.
3. Long press for 3 seconds on the shutdown interface to turn off the Smart Watch.

Watch operation

1. ln the startup state, slide to light up the screen or switch the display.
2. The screen will automatically turn off after 5 seconds of no operation. Users can modify the screen time by connecting to the mobile app or adjusting it on the watch (on the watch: Settings-Brightness-Screen Tme.)
3. The watch s set to monitor the heart rate for 24 hours by default. Users can turn this feature on or off in the general settings of the APP nterface.

HOW TO INST ALL APP

Please scan the QR code below or download the ” GloryFit ” app from the application market to install the paired app. Device requirements: OS 9.0 or above, Android 9.0 or above, with support for Bluetooth 5.2.

https://app.help-document.com/gloryfit/download/index.html

CONNECT WITH DEVICE

Open the app and click on “Device”. Then, click on “Add Device” and select the corresponding device model. Follow the prompts to connect (see the instructions below). Bluetooth connection: After successful pairing, the app will automatically save the watch’s Bluetooth address. When the app is opened or running in the background, t will automatically search for and connect to the watch.
Data synchronization: Manually pull down the main page of the app to synchronize data. The watch can save offline data for up to 7 days. The more data there is, the longer the synchronization time will be, but it should take no more than 2 seconds to synchronize data. After synchronization, a “Synchronization Finished” message will appear.
Synchronized contacts: Enter the Bluetooth terminal in the background of the mobile phone and open the synchronized contacts (refer to the nstructions below). Main interface:
The smart watch has 5 main local dial style. On the main nterface, press and hold for two seconds, after watch vibration, you can switch the dial eft and right. Customized homepage is supported. (Steps: Open the APP – Device – Watch faces – Dial center/Custom dial.)
Bluetooth calling:
You can make calls or answer directly on the watch, the watch and the mobile phone will dial in real time.
Al intelligent voice:
After the watch is successfully linked with the mobile phone, the watch can directly conduct intelligent voice conversations.
Message:
Slide up on the main interface to view the information. The watch can save 8 pieces of nformation pushed by the APP recently (if there is no message, it will stop at the message interface). Slide right to exit and return to the upper interface. Automatically delete already viewed information, there is an option to delete all at the bottom, slide down to return to the ive interface.
Training
Enter the sport interface and choose from over 100 sports. Select a specific sport and click to start monitoring after a three-second countdown. Press the upper corner button or slide to the right to pause, and click”square symbol” to end the monitoring session.
Status
Switch to the status interface to view your current step count, distance, and calorie status. The distance and calories are calculated and displayed based on your current walking steps, as well as the height and weight you set n the APP.
Heart rate
Switch to the heart rate nterface to start automatic heart rate measurement. You can also re-measure your heart rate by accessing the menu.
Blood oxygen
Switch to the blood oxygen interface to start automatic blood oxygen measurement. You can also re-measure your blood oxygen by accessing the menu.
Sleep
Switch to the sleep nterface to check the quality of your previous night’s sleep.
Weather
Switch to the weather interface to view weather and temperature conditions.
Music
Once successfully connected to the paired “GloryFit” APP, the watch can control music playback such as pausing, skipping to the previous or next song, when your phone is n music-playing mode.
Alarm clock
Enter the alarm clock interface to add or delete alarms, and set up to eight groups of alarm clocks.
Respiration rate
Enter the breath test interface to automatically measure your breath rate. You can also re-measure by accessing the menu.
Breathing exercises
Enter the breathing training function and follow the animation to practice breathing rhythm training.
Physiological cycle
This feature is only available for female users who are logged in. The physiological cycle will be displayed on the application only after the profile is filled in as female. Turn on the device reminder switch and set your personal physiological cycle status. After the physiological cycle is set, you can view this information on your SmartWatch.

• More
  • Stopwatch: Click to start timing and swipe right to exit back to the previous nterface once timing is stopped.
  • Timer: Switch to the timer interface to set the time or add a custom time.
  • Find Phone: Switch to the search interface to find a mobile phone in a connected state. The phone will send a ringtone to remind you.

• Setup
  • Watch face: Click this nterface to switch the watch face eft and right and click to select the watch face.
  • Theme: Click this interface to choose from three interaction modes.
  • Brightness adjustment: Click to select different brightness evels. There are four evels of brightness.
  • Bright screen duration adjustment: Click to select the bright screen duration, which can be set to 5 seconds, 10 seconds, or 15 seconds.
  • Sound setting: Click to enter the sound setting interface where you can choose to turn on or off the entertainmenUcall ringtone.
  • About: Click this nterface to view the firmware version number and Bluetooth address of the smartwatch.
  • Factory reset: Click this interface to choose factory reset (clear all data) or cancel.
  • Shutdown: Click this interface to select shutdown or cancel shutdown.
  • App download: Click this interface to scan the QR code and download the app.

PRECAUTIONS

• Avoid exposing your watch to high temperatures or direct sunlight for extended periods, and protect it from being shocked.
• Do not disassemble, repair, or modify the device.
• Only use a 5V power adapter to charge the device; charging with an over-voltage power supply is prohibited.
• The device should be used within the temperature range of -20 to 60 degrees Celsius, and should not be thrown nto fire to prevent explosion.
• After sweating or getting wet, dry the watch with a soft cloth before charging to avoid corrosion of the charging touch points.
• Keep the device away from chemical substances such as gasoline, cleaning solvents, propanol, alcohol, or insect repellent.
• Do not use the product in high voltage or high magnetic environments.
• If you have sensitive, dry skin or the watch is too tight, it may cause discomfort.
• Do not wear the device while taking a hot bath.
• Timely dry sweat on your wrist to avoid skin itching or allergies caused by long-term exposure to soap, sweat, allergens, or other contaminants.
• It s recommended to clean the watch weekly by wiping it with a damp cloth and mild soap to remove oil or dust.
• Do not press any buttons unnecessarily.

COMMON PROBLEM

What to do f the device cannot connect to Bluetooth? (slow connection, unable to connect, or unable to reconnect)

1. Make sure your device is running OS9.0, Android 9.0 or above, and the watch only supports Bluetooth 5.2.
2. Depending on the signal interference of the Bluetooth wireless connection, each connection may take a different amount of time. If the connection fails for an extended period, try using it in an environment without magnetic fields or multiple Bluetooth devices interfering with each other.
3. Turn off and then on the Bluetooth again.
4. Turn off background applications on your mobile phone or restart your phone.
5. Do not connect your mobile phone to other Bluetooth devices or functions at the same time.
6. Please ensure that the app is running normally in the background. Otherwise it may fail to connect.

If the watch cannot be found, try the following:

1. Make sure the watch is turned on and activated, and that it is not connected to any other mobile phones. Bring the watch close to the phone. If it still doesn’t work, turn off Bluetooth on the phone and restart it after 20 seconds.
2. Make sure that the GPS on your phone is turned on.

Why should the watch be worn tightly when measuring heart rate?
The watch uses a light reflection principle, collecting signals reflected to the sensor to calculate heart rate after the light penetrates the skin. If the watch is not wom tightly, the surrounding light will enter the sensor and affect its accuracy.
Why can’t the watch receive notifications when the reminder function is turned on?
For Android phones: Make sure that the phone and watch are connected. After connecting, grant the ” GloryFit ” app permission to access calls, text messages, and contacts, and allow it to run in the background. If the phone has security software installed, add “GloryFit” as a trusted app.
For Apple phones: We recommend restarting your phone and reconnecting if you’re not receiving notifications after connecting. When reconnecting with the watch, you should receive the notification after clicking “Pairing” when the Bluetooth Pairing Request pops up.
Is the watch waterproof?
Yes, it is waterproof with an IP68 waterproof and dust-proof rating, so you can wear it with peace of mind while washing your hands, running, or washing cars.
Does the Bluetooth connection need to remain “on”? Will data be saved if there is a disconnection?
Data will be saved on the watch itself prior to synchronizing the data (up to 7 days of data can be saved). When the phone successfully connects to the watch’s Bluetooth, the data on the watch will automatically upload to the phone. Please synchronize the data to your phone in a timely manner. Note: If you want incoming call or message notification functions to work, please keep Bluetooth in a connected state, as the alarm clock notification requires a connected Bluetooth.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>