DAYTON AUDIO NBS-F Commercial Slim Fixed TV Wall Mount Instruction Manual
- June 4, 2024
- DAYTON AUDIO
Table of Contents
DAYTON AUDIO NBS-F Commercial Slim Fixed TV Wall Mount
Technical Specifications
- Max VESA: 600×400;
- Maximum load: 88 Lbs.
Parts List
Please check the parts in the package in comparison with the following list, make sure all of the parts are in the package. Never use defective parts, and never replace parts with different specification
Installation and operation instructions
Note: Read the instructions carefully before beginning installation.
- Step 1:
Use the wall plate as a template to mark where to drill four 10mm holes. Push the plastic anchors into the holes.
- Step 2:
Install the wall plate to the wall with the included self tapping screws, washers, and plastic anchors. Ensure that wall plate is level.
- Step 3:
The package includes a variety of hardware for mounting a variety of televisions. Choose the appropriate screws and washers for your television and mount the bracket rails to the back of the screen. Use spacer J-2 if your television requires additional offset from the wall.
- Step 4:
Hang the bracket rails along with the television on the wall plate using the bottom hooks of the bracket rails.
- Step 5:
Adjust the two bolts under the monitor brackets to secure the television to the wall plate and keep the television from moving.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>