AiFuke 3C022 Aluminum Alloy 3 In 1 Magnetic Holder and Wireless Charger Instructions
- June 16, 2024
- AiFuke
Table of Contents
AiFuke 3C022 Aluminum Alloy 3 In 1 Magnetic Holder and Wireless Charger
Product Information
- This device is designed to comply with part 15 of the FCC Rules, ensuring that it operates within the necessary guidelines to prevent harmful interference. It has been tested and certified to meet these standards.
- The device is equipped with a receiving antenna that can be reoriented or relocated to optimize signal reception. It is recommended to increase the separation between the equipment and receiver if interference is experienced.
- For optimal performance, it is advised to connect the equipment into an outlet on a circuit different from that to which the receiver is connected. If you require further assistance, please consult the dealer or an experienced radio/TV technician.
- The equipment also adheres to FCC radiation exposure limits for an uncontrolled environment. To ensure safety, a distance of 15 cm surrounding the device and 20 cm above the top surface must be respected during operation.
Product Usage Instructions
Reorienting or Relocating the Receiving Antenna
If you are experiencing poor signal reception, try reorienting or relocating the receiving antenna. Follow these steps:
- Identify the receiving antenna on the device.
- Gently adjust the position of the antenna to optimize signal reception.
Increasing Separation between Equipment and Receiver
If you are encountering interference issues, it is recommended to increase the separation between the equipment and receiver. Follow these steps:
- Identify the location of both the equipment and receiver.
- Move the equipment and receiver further apart, ensuring a greater distance between them.
Connecting Equipment to a Different Circuit
If you continue to experience interference, try connecting the equipment to a different circuit. Follow these steps
- Locate an available outlet on a circuit different from the one the receiver is connected to.
- Connect the equipment to the identified outlet.
Consulting the Dealer or Technician
If you have followed the above steps and still require assistance, it is recommended to consult the dealer or an experienced radio/TV technician. They will be able to provide further guidance and support.
Specifications
- Compliance: Part 15 of FCC Rules
- Interference: Must not cause harmful interference
- Antenna: Receiving antenna for signal reception
- Radiation Exposure: Complies with FCC limits for an uncontrolled environment
- Safety Distance: 15 cm surrounding the device and 20 cm above the top surface.
Product Introduction
This product is a three-in-one fast wireless charger, Which can wirelessly
charge mobile phones/Watch/TWS bluetooth headsets that support the al standard
at the same time. It is a convenient and practical intelligent electronic
device.
Wirelessly charge your device by placing it in the charging area, And you can
video chat or watch your favourite movies while charging.
It is recommended to use a power adapter of 20W and above
Specifications
Operation Steps
- Connect the charging cable to this product before charging other devices.
- Place your phone/ Watch/TWS earbuds on the wireless charging area and it will start charging after 0.1S. Remove your device when it is fully charged or amid the process if needed.
Cautions
- Do not soak the product in water to avoid short circuit.
- Do not disassemble or hit the product to avoid damage.
- Do not place the product near flammable and explosive liquids, gas or other items.
- Do not place the product near magnetic card, magnetic objects or precision machines.
FCC
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
Frequently Asked Questions
Q: What is FCC compliance?
A: FCC compliance refers to the adherence of this device to the regulations set forth by the Federal Communications Commission (FCC) in the United States. It ensures that the device operates within acceptable limits and does not cause harmful interference.
How can I improve signal reception?
A: To improve signal reception, you can try reorienting or relocating the receiving antenna. Additionally, increasing the separation between the equipment and receiver may also help optimize signal quality.
Q: What should I do if I still experience interference?
A: If you are still experiencing interference issues, it is recommended to connect the equipment to a different circuit. If the problem persists, consult the dealer or an experienced radio/TV technician for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>