Lepro WL1 Smart LED Bar Light Instruction Manual
- June 16, 2024
- Lepro
Table of Contents
Lepro WL1 Smart LED Bar Light
WHAT’S INCLUDE
App Connection
Turn on the phone’s Bluetooth and connect to the Wifi network.
Follow the on-screen steps to finish setup.
Voice Control
If the light does not work, please go to Amazon Alexa or Google Home APP
and click DISCOVER DEVICES.
How to reset the light.
Long press the controller switch button for 5 seconds.
INSTALLATION
NOTICE
- Use this product with the provided power adapter only.
- Connect to the APP properly before installation.
- Do not assemble this product with parts from other similar products.
- Luminaires are not suitable for direct mounting on normally flammable surfaces.
- Luminaires are not suitable for covering with thermally insulating material.
- Do not block the controller with metal objects.
- There’s a built-in microphone inside the controller, please place your music-playing device near the controller for better results.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Where breakage or damage to lamps occurs the chain must not be used/energized but disposed of safely.
- For indoor use only.
- This light source is only for use in applications requiring high-quality colored light. Use of this light source will lead to increased energy costs compared to an equivalent more energy-efficient product.
- Color-tuneable light sources with a minimum excitation purity of:
- This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
- Do not stick the neon rope light on Knitted / Wool fabrics / Dusty walls / Rough plastic surfaces / White painted walls.
- Only supports APP dimming.
Smart Lighting Holding Limited claims SKUs* meet the Radio Act 2014/53/EU. A complete Declaration of Conformity can be downloaded with this link: https://www.lepro.com/docs/
- Operation frequency range:
- US: 2412MHz-2462MHz(WiFi)/2402MHz-2480MHz(Bluetooth)
- EU &UK: 2412MHZ-2484MHZ(WIFI)/2402MHz-2484MHz(Bluetooth)
- Modulation type: DSSS (DBPSK/DQPSK/CCK) OFDM(BPSK/QPSK/16QAM/64QAM) GFSK
- Maximum transmit power: Turn up Tolerance: 16dBm
- Antenna Type: PCB Antenna
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment should be
installed and operated with minimum distance 20cm between the radiator& your
body.
ISEDC Warning
This device complies with Innovation, Science and Economic Development Canada
license-exempt RSS standard (s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. Any changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
onerate the equinment.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the
radiator & your body.
LEPRO INNOVATION INC
3651 Lindell Road Suite D1048, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558
cs@lepro.com
Le Ming Trading Inc.
801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA
www.lepro.ca +1
833-433-1453
cs@lepro.ca
Manufacturer / Hersteller: LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
www.lepro.de +49
800-723-6202
cs@lepro.de
UK Importer: Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs@lepro.co.uk
Made in China Fabriqué en Chine Hergestellt in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>