tp-link P110 US Mini Smart Wi-Fi Plug User Guide
- June 16, 2024
- tp-link
Table of Contents
tp-link P110 US Mini Smart Wi-Fi Plug
Getting Started
- Get the Tapo app from the App Store or Google Play.
- Follow the instructions in the Tapo app to complete the setup
How to reset the plug?
Notice! Restricted Substance Content Labeling Statement
- Low-power radio frequency equipment that has obtained verification certification, unless approved, the company, firm or user
- Users are not allowed to change the frequency, increase the power, or change the characteristics of the original design without authorization.
Function
- The use of low-power radio frequency equipment shall not affect flight safety or interfere with legitimate communications;
- When interference is found, it should be stopped immediately and improved until there is no interference before continuing.
Continue to use
- The aforementioned legal communications refer to radio communications operated in accordance with the provisions of the Telecommunications Management Act.
- Low-power radio frequency equipment must tolerate legitimate communications or industrial, scientific and medical use of radio waves Interference from radiated electrical equipment.
Safety consultation and precautions
- Please use the original power supply or only use the power supply type specified on this product. type of use of this product.
- Unplug the power cord before cleaning this product. Do not use liquids or sprays detergent or damp cloth for cleaning.
- Be careful to prevent moisture and do not spill water or other liquids on this product.
- Slots and openings are provided for ventilation to ensure reliable operation and prevent To prevent overheating, do not block or cover openings.
- Do not place this product near a heat source. Unless there is normal communication Wind, otherwise it cannot be placed in a closed location.
- Do not disassemble the casing or repair by yourself. If the product is faulty, please contact the original manufacturer. Or contact your agent.
Notice! Restricted Substance Content Labeling Statement
Unit
|
Restricted substances and their chemical symbols
---|---
Pb| Cd| Hg| Cr+6| PBB| PBDE
PCB| 0| 0| 0| 0| 0| 0
SHELL| 0| 0| 0| 0| 0| 0
POWER SUPPLY BOARD| –| 0| 0| 0| 0| 0
OTHERS AND ACCESSORIES| –| 0| 0| 0| 0| 0
- Notes 1. “Exceeding 0.1 w t %” and “Exceeding 0.01 w t %” refer to restricted substances The percentage content exceeds the percentage content reference value.
- Notes 2. “○” means that the percentage content of the restricted substance does not exceed the percentage content. Quantity base value.
- Note 3. “-” means that the restricted substance is an excluded item.
Supported Load Types for US Version:
- 100-125V, 50/60Hz, 15A, General use/Resistive
- 100-125V, 50/60Hz, 1/6HP, (4.4FLA/26.4LRA),
Motor load
100-125V, 50/60Hz, 8A, Incandescent
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
Please keep this instruction manual.
This is a portable direct plug-in device. Plug the device into a suitable
outlet. This device is intended for indoor use only.
- Keep the device away from heat sources and enclosed spaces with poor ventilation.
- Purpose of control: this is operating control.
- Operating control: Type 1.B action
- Impulse voltage: 1500V
- Pollution degree 2: NEMA Type 1 Enclosure
- Operation temperature: 0~40°C (32~104°F)
Tapo App
Support
For technical support, the user guide and other information, please visit
https://www.tapo.com/support/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>