Rowenta RY8534WH Multi-Surface Floor Steam Cleaner Mop Instruction Manual
- June 13, 2024
- Rowenta
Table of Contents
Rowenta RY8534WH Multi-Surface Floor Steam Cleaner Mop
Ironing Appliance Instructions
Depending on model
- Settings & Indicators:
- At the top, there are buttons for selecting the type of fabric, presumably adjusting the heat setting accordingly.
- There’s an ON button, likely to power on the device.
- A checkmark indicator, possibly to show that the selected setting is active or the iron has reached the desired temperature.
- Setting Up the Appliance:
- A separate detachable part, possibly the water reservoir, can be removed by pressing the button at the top.
- Once detached, the reservoir can be filled with water.
- It can then be reattached to the main body of the iron.
- Power Connection:
- The iron comes with a power cord, which can be connected to an electrical outlet.
- Base & Water Reservoir:
- The base of the iron has an opening, where the detachable water reservoir fits in.
- It appears to have a transparent window, possibly to check the water level.
- Filter Replacement:
- The iron has a removable filter, which can be taken out by sliding the section out.
- Soleplate & Steam Vents:
- The bottom of the iron, called the soleplate, is shown with steam vents. These vents release steam during ironing.
- Ironing Action:
- The iron can be used in a traditional manner on clothes placed on an ironing board. The direction of movement is indicated by the arrow.
Steam Mop Assembly and Usage Guide
- Detachable Water Reservoir:
- The steam mop features a detachable water reservoir, which can be easily removed by pressing the release button located at the top.
- Once detached, the reservoir can be filled with water from a jug.
- After filling, the reservoir can be securely placed back into its designated slot in the mop’s main body.
- Mop Pad Attachment:
- The base of the mop has a rectangular slot where the mop pad should be attached.
- The mop pad can be fastened by aligning it with the bottom of the mop and pressing down until a “click” sound is heard, ensuring the pad is securely attached.
- Powering On and Steam Release:
- Once the mop pad is attached and the reservoir is filled, the mop is ready for use.
- By pressing the power button located on the handle, the device can be activated.
- When powered on, the mop begins to release steam through the vents on its pad, allowing for effective cleaning of surfaces.
- Cleaning Cloth Texture and Replacement:
- The cleaning cloth or mop pad has a unique textured pattern that aids in efficient cleaning.
- This pad can be removed by pulling it away from the mop’s base when it’s time for cleaning or replacement.
- A detailed view of the mop pad is provided.
- Steam Scraper Attachment:
- For more stubborn dirt or grime, a scraper attachment can be added to the mop.
- This scraper is shown being attached to the front of the mop’s head, allowing for more intensive cleaning.
- A close-up of the scraper attachment is provided.
Plug the head on the appliance body.
Proper Handling and Refilling of a Steam Device
Fill the water tank: detach it by pushing the latches. Open the lid and fill in tap water.
Attention: do not add any chemicals, detergents, or perfumes. Close the lid and put the water tank back in the appliance.
- Unlocking and Opening the Reservoir:
- The steam device has a top-mounted reservoir.
- To open it, first rotate the top cap counter-clockwise (as shown by the curved arrow) to unlock it.
- Once unlocked, the cap can be lifted off to access the reservoir.
- Avoiding Certain Liquids:
- A cautionary panel indicates the types of liquids that should NOT be used.
- Chemical cleaning agents, represented by a bottle with a red “NO” symbol, should not be used. This may be because they can damage the device or produce harmful vapors.
- Distilled or soft water, represented by a bottle without any cross, seems to be the preferred filling option.
- Refilling the Reservoir:
- Using a jug, the reservoir can be refilled with the correct liquid, ensuring it’s filled adequately but not overfilled.
- Closing and Locking the Reservoir:
- Once filled, the cap can be placed back onto the top of the reservoir.
- To lock it in place, rotate the cap clockwise until a “click” sound is heard, ensuring a secure and leak-proof seal.
To start the appliance, plug it in first and then push the button on the handheld steam cleaner. The appliance is ready for use after 30 seconds of heat-up time (when the blue light stops blinking).
Fix the cord in the cord holder. Choose steam mode ECO (wooden floor) or MAX (stone, tiles floor). Press the Vacuum button on the side and hold the steam trigger if you want to vacuum and wash simultaneously.
To refresh your carpets with steam and vacuum them, use the Ultra glider and choose the ECO mode. Let a small steamed part dry in order to make sure that no changes in color or deformation have occurred.
Attention: always turn off the current steam mode by pressing the lit button before detaching the multi-purpose handheld steam cleaner. Push the unlock button on the top of the main appliance and pull the handle of the handheld steam cleaner. Plug the flexible tube and choose the accessory you want to use.
Chose either the ECO or MAX mode. To start steaming, press the steam button and direct the steam at the surface you wish to clean. Attention : always adapt the ECO or MAX mode according to the sensitivity of the surface you clean (please check the Safety Instructions for more information on steam power adjustment).
Chose either the ECO or MAX mode. To start steaming, press the steam button and direct the steam at the surface you wish to clean. Attention : always adapt the ECO or MAX mode according to the sensitivity of the surface you clean (please check the Safety Instructions for more information on steam power adjustment).
To keep your cleaning hygienic, we recommend to apply color codes by area : for example, use the orange colored brushes for your kitchen, blue brushes for the bathroom, green brushes for the other rooms.
Use joints brush and steam concentrator for corners and joints.
Use the steam squeegee for mirrors and windows in ECO steam position. To avoid excess of water drops on the glass surface, first clean with steam and then pass the squeegee (alone, without the steam) to dry your window without drips.
For textiles refreshment, use the squeegee with a microfiber sock at ECO steam position. Let a small steamed part dry in order to make sure that no changes in color or deformation have occurred.
To empty the dust container, push the 2 latches and pull it out the appliance. Empty the container and reattach the elements back: first the separator and then the filter with its lid. Install the dust container back.
Clean the dust container and water tank every week. Wash all parts with clear water and let them to dry.
Wash the foam filter abundantly with clear water. Wring it well to remove the excess of water and let it dry for 12 hours.
Wash accessories regularly with clear water. Attention: The accessory could still be hot after using. Detach it with caution.
To clean the head, first detach the mop support and then the head from the appliance body. Pass it under clean water and use a sponge if necessary. Let it fully dry for 24 hours before reinstalling.
Replace the foam filter of the dust container every 6 months. Detach the lid of the dust container and remove the foam filter, throw it away and install the new one.
Replace the anticalc filter (situated behind the water tank) every 3 months. It is important to respect the 3 months delay change in order to maintain the durability of your appliance.
You can wash the mops either with tap water or in the washing machine at 40° C. Attention: let mop and mop’s support to cool down after the cleaning session to avoid any hand burns.
Replace the mop by a new one after 100 washings.
To assure the stability of your appliance during the storage, use the fixator included in the pack. You can attach it to the wall with 4 screws (screws and screwdriver are not included).
Turn off the appliance after every usage (press steam and vacuum buttons). Unplug the appliance and roll up the cord.
Empty the water tank. Use the bag to store the accessories. Please notice that the appliance needs approximatively 30 minutes to cool down.
To transport your appliance, use either transportation wheels or the transportation Handle (situated behind the appliance).
Store your appliance inside or outside of a closet. Please always store it on the plastic support (included in the pack) in order to preserve your floors from the heat and humidity.
Safety Precautions for Steam Cleaner Usage
- Children : Avoid letting children operate the steam cleaner.
- Water Source : Do not fill the steam cleaner directly from taps, faucets, or hoses.
- Outdoor Use : Avoid using the device under rainy conditions.
- Exposure : Do not expose the steam cleaner to direct sunlight.
- Heaters : Never place the steam cleaner close to heaters or radiators.
- Temperature : Ensure the device operates within temperatures of 0°C to 40°C (32°F to 104°F).
- Hazardous Materials : Do not try to clean up spilled hazardous materials like gasoline with the device.
- Water Spills : Avoid spilling water during refill.
- Flammable Areas : Steer clear of using the steam cleaner near flames or flammable items.
- Steaming Plants : Refrain from directly steaming plants.
- Chemicals : Do not mix or use chemicals with the steam cleaner.
- Overfilling : Always avoid overfilling the water reservoir.
- Direct Steam : Do not point or release steam towards people or animals.
- Storage : Store in a cool, dry place away from children’s reach.
- Cleaning Modes : Use the appropriate mode/settings (evidenced by a ‘YES’ and ‘NO’ image depicting correct and incorrect modes).
- Face Exposure : Avoid directing the steam towards the face.
- Usage on Pets : Do not use the steam cleaner directly on pets.
- Pooled Water : Refrain from using the device in areas where water has pooled.
- Electrical Hazards : Ensure the steam cleaner is not used near exposed electrical outlets or wires.
FAQs
What is the Rowenta RY8534WH Multi-Surface Floor Steam Cleaner Mop?
The Rowenta RY8534WH is a multi-surface floor steam cleaner mop designed for efficient and hygienic floor cleaning.
What are the key features of this steam cleaner mop?
Key features include steam cleaning, multi-surface compatibility, a large water tank, and adjustable steam settings.
Is this steam cleaner mop suitable for all floor types?
Yes, it's designed to work on a variety of floor surfaces, including hardwood, tile, laminate, and more.
How does the steam cleaning process work?
The mop uses steam to sanitize and clean floors. Water is heated to produce steam that loosens dirt, and the mop pad collects the debris.
Can I use any type of water in the steam cleaner?
It's recommended to use distilled or demineralized water to prevent mineral buildup in the machine.
Is it safe for use around children and pets?
The steam cleaning process is chemical-free, making it safe for use around children and pets as long as they are kept away from the hot steam.
What is the size of the water tank?
The water tank is typically large, providing extended cleaning time before needing a refill.
Are there adjustable steam settings?
Yes, you can typically adjust the steam settings to control the intensity of cleaning depending on the floor type and level of dirt.
Does it come with additional cleaning attachments?
Some models may come with additional attachments for specific cleaning tasks, such as grout or upholstery cleaning.
Is it easy to maintain and clean the mop pads?
Maintenance is usually straightforward, and mop pads can be removed and machine washed or replaced.
How long does it take for the mop to heat up and be ready for use?
The heating time may vary, but it's typically ready for use within a few minutes after turning it on.
Is it suitable for deep cleaning or just for touch-ups?
It's suitable for both light touch-ups and deeper cleaning, making it a versatile cleaning tool for your home.
Reference: Rowenta RY8534WH Multi-Surface Floor Steam Cleaner Mop – Device.report