H6050 Govee Glow Table Lamp User Manual

H6050 Govee Glow Table Lamp

Safety Instructions

Read and follow all the safety instructions:

• The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within -10° to 40°C (14° to 104°F).
• The lamp’s internal light source cannot be replaced. If it breaks, you must replace the lamp.
• Do not allow children to install the lamp alone.
• Avoid placing the lamp near heat sources.
• Do not install the lamp with a dimming driver.
• Avoid placing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).
• Do not charge other devices with the Type-C cable attached to the control box.
• Do not attempt to detach the light from the base, as it might affect the product’s lifespan.

Introduction

Thanks for choosing the Govee Glow. The Govee Glow helps you create a warm ambiance and supports smart voice control. Choose from 16 million colors, turn up the music, and immerse yourself in a party of dancing lights

What You Get

At a Glance

Long press to change color modes.

Installing Your Device

1. Connect the adapter to the control box with the DC charging port.
2. Insert the other end of the cable into the power cable port on the lamp.
3. Power on the adapter.

Pairing Your Device with the Govee Home App

What You Need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
• Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
• Open the app, tap the “+” icon in the top right corner and search for “H6050”.
• Tap the device icon and follow the onscreen instructions to complete pairing.

Customer Service

• Warranty: 12-Month Limited Warranty ‘9
• Support: Lifetime Technical Support
• Email: [email protected]
• Official Website:www.govee.com

Specifications

Troubleshooting

• Cannot connect to Wi-Fi.
  • check if the lamp is powered on.
  • Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
  • When connecting for the first time, ensure the smartphone is near the lamp.
  • If the connection error still exists, please delete the connected lamp from “My Device” on the app. Reconnect to the Govee Home app by following the instructions provided previously.
• Wi-Fi disconnected or failed to connect.
  • check if the lamp is powered on.
  • Do not skip the Wi-Fi connection steps during the lamp pairing process.
  • Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
  • Ensure you entered the correct Wi-Fi password during the Wi-Fi setup process.
  • Try connecting the lamp with a smartphone hotspot to check if your home network is working properly.
  • Shorten the distance between the lamp and the Wi-Fi router to less than 50 inches, then reconnect.
• Cannot connect to Alexa or Google Assistant.
  • Ensure the Wi-Fi connection is stable and working properly.
  • Go to “User Guide” on the app Settings page to pair the lamp again.
• The lamp is not working properly.
  • Only use the provided Type-C cable with the control box included with the product. The lamp does not support any other charging cables.
• Can multiple users control one lamp?
  • Each lamp can only be controlled by one account.
  • If multiple users want to manage the same lamp, ensure they all use the same account.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Responsible party

• Name: GOVEE MOMENTS(US) TRADING LIMITED
  Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448

• Email: [email protected]

• Contact information: https://www.govee.com/support

The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Not intended for illumination. Only used for creating ambiance. The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license. Govee is a trademark of Shenzhen lntellirocks Tech Co., Ltd. Copyright ©2021 Shenzhen lntellirocks Tech Co., Ltd. All Rights Reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>