optrel 4551.650 Protection Cover for Swiss Air User Manual

optrel 4551.650 Protection Cover for Swiss Air

Product Information

Specifications:

• Designation: Protection Cover for Swiss Air
• Application Compatibility: Swiss Air
• IP Protection: Yes
• Operating and Storage Temperature: Not specified
• Fire Resistance: Flame retardant according to EN533 Class 1 BS7837:1996 CPAI 84 Section 6
• Material: Not specified
• Washing: Not specified

Product Usage Instructions

Mounting:

1. Attach the shoulder harness to the blower.
2. Tighten the elastic band on the hose.
3. Close the retaining clips on the side of the cover.
4. Secure the hose clip.
5. The cover is now mounted and ready for use.

Removal :

1. Remove the shoulder harness from the blower.
2. Loosen the elastic band on the hose.
3. Open the retaining clips on the side of the cover.
4. Open the hose clip to remove the hose.
5. The cover can now be easily removed.

Frequently Asked Questions (FAQ)

• Q: What is the IP protection rating of the cover?
  A: The cover has IP protection, but the specific rating is not specified in the manual.

• Q: What is the fire resistance rating of the cover?
  A: The cover is flame retardant according to EN533 Class 1 BS7837:1996 CPAI 84 Section 6.

• Q: Can the cover be washed?
  A: The washing instructions for the cover are not specified in the manual.

• Q: What is the operating and storage temperature range for the cover?
  A: The manual does not provide specific information about the operating and storage temperature range for the cover.

• Q: What is the material of the cover?
  A: The manual does not specify the material of the cover.

Description

• Protective cover with IP54, provides dust protection, protection against splashing water and is flame retardant. The air filter function is ensured by a coarse-meshed air inlet. The protection cover can be opened to change filters and batteries.
• Easy and quick to attach.

Working Area

• Working in the rain is possible and approved by optrel.
• During dust-intensive work, the device is protected from contamination.

Added value
Permanently protected, prevention of occupational respiratory diseases, better quality of life, a better working day even in the rain.

Mounting

The following steps describe the images from page 4 to 6.

1. Step 1:
   Initial Situation

   • Protection cover
   • Blower
   • Hose clip
   • Carrying unit

2. Step 2:
   Put the protection cover over the blower like on the picture

3. Step 3:
   Push the blower all the way in until it is completely inside the cover

4. Step 4
   Insert the hose into the opening of the protection cover

5. Step 5
   Insert the hose into the opening of the blower. Just like when you use the device without the protection cover

6. Step 6
   Push the hose all the way into the opening and fix it with the hose clip. Check that the sealing is mounted.

7. Step 7
   Roll the upper part of the filter cover 3 times around the width of the black border.

8. Step 8
   Roll the upper part

9. Step 9
   Fasten the rolled up upper part with the locking clips on the side

10. Step 10
    Seal the edge at the hose with the elastic to prevent water/dirt from getting in

11. Step 11
    Shows the initial situation

12. Step 12
    Reattach the swiss air to the carrying unit

13. Step 13
    The swiss air is ready for work again!

NOTE:
It is not possible to use the control panel with the protection cover!

Removal

The following steps describe the images from page 6.

1. Step 1
   First remove the shoulder harness from from the blower

2. Step 2
   Loosen the elastic band on the hose

3. Step 3
   Open the retaining clips on the side of the cover

4. Step 4

5. Now open the hose clip to remove the hose.

6. The cover can be easily removed

Versions
4551.650 black

Technical details

84 Section 6
Material| Polyester
Washing| Hand wash with pure soap, max. temperature 40°C

• phone: +41 (0)71 987 42 00
• fax: +41 (0)71 987 42 99
• info@optrel.com
• www.optrel.com
• Date of sale:
• Dealer‘s stamp:

visit our homepage
http://www.optrel.com
99661010..222288..0044

References

• Schweisshelme, Atemschutz und Gesichtsschutz für Profis – swiss made

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>