GUARIAN ANGEL 3-MCR Micro All IR Instructions

GUARIAN ANGEL 3-MCR Micro All IR

Product Information

Specifications

• Magnet Mount
• Extreme Battery Life
• Built Tough
• IP67 Rated
• Rechargeable

Product Usage Instructions

Charging
To charge the device, follow these steps:

1. Connect the device to a power source using the provided charging cable.
2. The top LED will turn on, indicating that the device is charging.
3. Pro Tip: The top LED will single flash when charging and flash twice when fully charged.

Power ON
To power on the device, follow these steps:

1. Press and hold the GA button until the top LED starts flashing.
2. The front and rear LEDs will scroll off.
3. The device is now powered on.
4. Pro Tip: You can tell the device is ON when the top LED single flashes.

Emergency Mode
To activate the emergency mode, follow these steps:

1. Hold down the GA button until all LEDs start flashing.
2. The top focused LED will turn on and off.
3. The rear LEDs will be constantly on or constantly flashing in a scrolling sequence (moves left to right).
4. Hold down the GA button to check the battery level indicator:
   • Full: All LEDs are on.
   • Half: Half of the LEDs are on.
   • Low: Only a few LEDs are on.

Tether Attachment
To attach the device using the tether, follow these steps:

1. Securely attach the tether to the device.
2. Attach the other end of the tether to your desired object (e.g., hard hat, vest, cone).

Work Light
To use the work light mode, follow these steps:

1. Press and hold the GA button until the work light LED turns on or off.
2. Hold down the GA button to switch to the standard operating mode (all front LEDs on, rear LEDs flashing).
3. The light ON indicator will blink every 4 seconds if the light is on.
4. The light ON indicator will blink faintly while the light is on or charging.

Brightness Settings
To adjust the brightness settings, follow these steps:

1. Press and hold the GA button to cycle through different brightness levels:
   • Max
   • High
   • Medium
   • Low
2. Hold down the GA button to turn the SOS signaling on or off.

Frequently Asked Questions (FAQ)

• Q: How do I turn off the lights quickly?
  A: Double press the GA button to quickly turn off the lights.

• Q: What are the recommended uses for this device?
  A: This device is suitable for various applications, including construction, military, utilities, mining, law enforcement, EMS/fire, roadside assistance, hard hat, vest, cone, camping, hiking, fishing, hunting, boating, biking, ATV, snowmobile, vehicle, running, and dog walking.

Illumination Without Boundaries

Micro Series

Thank you for your purchase!

• gadevice.com/warranty Protect your device
• gadevice.com/learn Get to know your device

WARNING-Cancer and reproductive harm www.P65Warnings.ca.gov

IMPORTANT Safety Warnings: gadevice.com/warnings

Your feedback is IMPORTANT to us! gadevice.com/feedback

Power ON or Power OFF Device for storage

Power ON

• Option 1- Hold down Front and Rear buttons for 2 seconds
  • Top LED turns ON
• Option 2 -Plug your device in an AC Adapter using USB Cable
  • Top LED will single flash
  • Double flash when charge is 100%
• Device turns ON at Max brightness

Power OFF

• Hold down the Front and Rear buttons for 3 seconds
  • Top LED flashes 3 times – unit is OFF.

Charging

Charging (0% – 100%- approx. 1.5 hours)

• Open sealed side door of the device and plug in Type-C USB cable. Charging can be with any USB 1000mA AC adapter used with cell phones.
• Pro Tip: Top LED single flashes when charging Flashes twice when fully charged.
• Pro Tip: You can tell the Device is ON when Top LED single flashes

Operation: ALL Infrared

References

• Contact | Guardian Angel™
• Help Articles Archives - Guardian Angel Devices
• Terms Of Use | Guardian Angel™
• Warranty Registration | Guardian Angel™
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>