Acova 1011 Electric Symmetrical Alpaca Instruction Manual
- June 16, 2024
- ACOVA
Table of Contents
40016213
Original mounting instructions
Swivelling air bleed valve
Tighten the bleed valve moderately on the radiator with the o-ring to ensure
watertightness (15 Nm max). Loosen the needle valve and turn the cone to
direct the jet in the required direction. This steel radiator is suitable for
connection to the central heating system only. When new or additional
radiators are being installed, the system should be drained, cleaned and
flushed in accordance with BS7593 and a good quality inhibitor, suitable for
mixed metal systems, used to protect the system. If in doubt, seek
professional advice. (For information on water treatment, please call the
Water Treatment helpline on 01799 521133)
CAUTION To avoid any danger to very young children, you are advised to
install this appliance so that the lowest heating bar is at least 600 mm off
the floor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>