ZENLIGHT PMMA Globe Lamp Shade User Manual
- June 16, 2024
- ZENLIGHT
Table of Contents
USER MANUAL
OPERATING INSTRUCTIONS
The lamp is turnedon and off by touching its upper side. To change light intensity, touch and maintain contact on the same side; light intensity will change from 100% to 50% and then to 25%.(See number 1 on the graphic) In order to switch color, touch the upper part of the base as it’s shown in the number 2 of the drawing. When the battery is discharged, the lamp can work through the micro-USB connection in IP20shielded Indoor spaces. Suitable for IP54 outdoor areas. Put into operation on a level, sold surface protected against overturning exclusively Make sure that the micro-USB socket is closed before using outdoors.
BATTERY CHARGE
Connect the micro-USB to the charge port on the base of the lamp and plug the
opposite side In the power outlet. Ablue light In the micro-USB outlet
Indicates the charging process.(See number 3 on the graphic) Charge the
battery for over 7 hours to reach the optimal level of charge. The blue light
in the micro-USB outlet turns off when the lamp la fully charged. A full
charged battery supports about 12 hours of continuous usage. To ensure the
optimal performance of the battery. we suggest it to be discharged and
recharged comptetely for the first 10 cycles. Charge the battery as soon as
possible after it gets empty: the battery life will be suffer if it is left
empty for a long period.
BATTERY REPLACEMENT
Use only the original rechargeable battery pack. Do not use under any
circumstances regular batteries, because It can be dangerous. In order to get
a replacement battery. please contact Manufacturer
BATTERY REMOVAL
Make sure that the product is not connected to a power source. Remove the
bottom surface by loosening is 4 screws; take the connector apart and remove
the battery by ungluing it. Take the battery to a suitable processing center.
WARNING
The lamp is outfitted with a rechargeable lithium battery. Do not expose. the
battery to heat sources or sunlight. Do not handle this product while
connected to the power sauce.The light must not in any case be modified or
forced;every alteration may conpromise safety and make it hazardous.
Manufacturer declines any responsibility for altered products.
ATTENTION
Please read carefully the product’s use and maintenance instructions: the
safety of the product can only be guaranteed if instructions are followed
.Keep these instructions in a sale place. Manufacturer does not assume any
liability for material and personaldamages caused by the misuse of the
product. The warranty does not include any kind of assistance or repairing due
to damages subsequent to the misuse of the product . Any alteration of the
product will void the warranty. Do nat immerse the product into water or
handle it with wet hands . If malfunctioning, damages or deterioration are
suspected, take it out of service and call the distributor or a qualified
technician. Charger included. Rated input current 100-240V-50/60Hz. Rated
output current 5V DC 1A. Please always us e charger and cable provided by
manufacturer.
MAINTENANCE & CARES
Material: PMMA Light source: LED 0.74W 5V -z-1A
If the charger cable were damaged. it should be replaced by another one with
its precise Characteristics. The product should not be connected to the power
source while being cleaned. The lamp should be cleaned with a soft damp cloth
using watered neutral liquid detergent or soap. Avoid using alcohol or
detergents containing acetone thiamine, ammonia or any other solvent. Do not
expose to strong mechanical effort or big dirt. Tos4 Protection: Protection
against the ingress of dust . and Protection against sprayed water. This
protection is only ensured when the micro-US8 socket is closed. The Wont
source of the lamp must be replaced exclusively by the manufacturerorits
technical service.
INSTRUCTIONS FOR RECYCLING AND DISPOSAL:
This label means that the product cannot be disposed of as other household
waste throughout the EU. To prevent potential damage to the environment or
human health from uncontrolled waste disposal. Recycle responsibly to promote
the sustainable use of material resources. If you want to return a used
device, use the drop-off and collection system, or contact the retailer from
whom you bought the product. The retailer can accept the product for
environmentally safe recycling.
**** A declaration by the manufacturer that the product complies with the
requirements of the applicable EU Directives.