aiwa AMU-120BT All-In-One Amplifier User Guide

June 5, 2024
Aiwa

Aiwa AMU-120BT All-In-One Amplifier

aiwa-AMU-120BT-All-In-One-Amplifier-Product

ACCESSORIES

aiwa-AMU-120BT-All-In-One-Amplifier-fig-1

REMOTE CONTROLLER

aiwa-AMU-120BT-All-In-One-Amplifier-fig-2

  1. STANDBY
  2. MUTE
  3. NUMERIC PAD
  4. *PREVIOUS ()**
  5. DIRECT ON /OFF
  6. VOL+ (INCREASE VOLUME)
  7. PLAY/ PAUSE (►n)
  8. BALANCE (L) (+ / ·)
  9. TREBLE (+ / ·)
  10. INPUT SOURCE BUTTONS
  11. DISC. (DISCONNECT BT)
  12. DISPLAY (DISPLAY INFORMATION) PRESS IT SEVERAL TIMES IN A ROW TO DISPLAY THE TRACK NAHE, ARTIST NAHE, AND THE ALBUM. ONLY AVAILABLE IN BLUETOOTH, USB, AND SD CARD PLAYBACK HODES.
  13. LOUDNESS ON / OFF
  14. REPEAT FUNCTION
  15. PROG (PROGRAM MODE)
  16. STOP C ■)
  17. NEXT (.i)
  18. BALANCE (R) (+ / ·)
  19. BASS(+/·)
  20. VOL· (DECREASE VOLUME)
  21. SPEAKER OUTPUT A/B

aiwa-AMU-120BT-All-In-One-Amplifier-fig-3

CONNECTION TO THE MAINS

aiwa-AMU-120BT-All-In-One-Amplifier-fig-4

FRONT PANEL CONTROLS

aiwa-AMU-120BT-All-In-One-Amplifier-fig-5

  1. STANDBY
  2. USB-MP3 SLOT FOR PLAYBACK
  3. SD-MP3 SLOT FOR PLAYBACK
  4. DOT-MATRIX DISPLAY
  5. INPUT SOURCE SELECTION PHONO, AUXI, AUX2, AUX3, SACD, MICROPHONE, USB/SD, BLUETOOTH.
  6. KNOB FUNCTION MODE SELECTION PRESS MULTIPLE TIMES TO SCROLL BETWEEN VOLUME, BASS, TREBLE, AND BALANCE OPTIONs.
  7. MULTIFUNCTION KNOB ADJUST THE PREVIOUs SELECTED MODE OPTION OF VOLUME, BASS, TREBLE, AND BALANCE.
  8. HEADPHONES OUTPUT
  9. MICROPHONE INPUT
  10. SPEAKER OUTPUT (A)
  11. PLAY/ PAUSE
  12. SPEAKER OUTPUT (B)
  13. STOP
  14. PREvIOUS
  15. LOUDNESS ON/ OFF LOUDNESS FILTER NORMALIZES THE vOLUME BSY REDUCING THE LOUD SOUNDS AND INCREASING THE LOw sounds.
  16. NEXT
  17. DIRECT ON/ OFF ORIGINAL UNTREATED SOUND BY BASS AND TREBLE ADJUSTMENTS.

REAR PANEL CONNECTIONS

aiwa-AMU-120BT-All-In-One-Amplifier-fig-6

  1. POWER ON / OFF
  2. SPEAKER TERMINALS A/B CONNECT SPEAKERS TO THE A/B TERMINALS WITH IMPEDANCE OF 4-8 Ohms. THE A+ B IMPEDANCE IS 8 Ohms.
  3. PHONO GROUND TERMINAL
  4. POWER CORD
  5. SERVICE PORT
  6. RECORDING LINE OUT USES AN ANALOG AUDIO CABLE TO OUTPUT AUDIO SIGNALS TO RECORDING EQUIPMENT.
  7. CD/SACD PLAYER INPUT A SPECIAL INPUT FOR CONNECTING CD PLAYERs, IT ALSO SUPPORTS DEVICES WITH SUPER AUDIO CD “SACD” FORMAT.
  8. AUX AUDIO INPUT TERMINALS cONNECT THE DESIRED AUDIO SOURCE VIA AN ANALOGUE CABLE TO THE AUX-1/AUX-2/AUX-3 INPUTS.
  9. PHONO (MM) INPUT BUILT-IN PHONO PRE-AMP FUNCTION WITH RIA4 EQUALIZER COMPATIBLE ONLY WITH MOVING MAGNET CARTRIDGES (MM).

CONNECTING SPEAKERS TO THE A/B TERMINALS

aiwa-AMU-120BT-All-In-One-Amplifier-fig-7

  1. UNSCREW THE PROTECTORS UNSCREw THE TERMINAL OUTPUT PROTECTORS BY HAND OR WITH THE HELP OF A SPANNER.
  2. ADJUST THE PROTECTORS TO LOOSEN OR GENTLY REMOVE THE PROTECTIVE PIECE TO REVEAL THE SPEAKER OUTPUT TERMINAL.
  3. READY THE SPEAKER WIRES TWIST THE EXPOSED WIRES OF THE SPEAKER CABLES sO THAT THEY DO NOT PROTRUDE FROM THE TERMINALS WHEN YOU CONNECT THEM. FOR A SECURE CONNECTION, LEAVE AT LEAST 15MM/8″ CLEARANCE.
  4. INSERT THE SPEAKER CABLES CAREFULLY INSERT THE SPEAKER WIRES INTO THE TERMINALS, MATCHING THE COLORS THAT INDICATE THE POLARITY OF EACH OUTPUT.
  5. SCREW BACK THE PROTECTORS INSERT AND SCREW BACK THE TERMINAL PROTECTORS ENSURING A FIRM CONNECTION BETWEEN THE SPEAKERS AND UNIT.
  6. ENJOY THE MUSIC! REMEMBER TO USE THE UNIT RESPONSIBLY AND AVOID EXPOSURE To VERY HIGH VOLUME LEVELS.

aiwa-AMU-120BT-All-In-One-Amplifier-fig-8BLUETOOTH MODE
aiwa-AMU-120BT-All-In-One-Amplifier-fig-9

  1. SELECT THE BLUETOOTH MODE USING THE REMOTE CONTROLLER OR THE INPUT soURCE BUTTON ON THE FRONT PANEL.
  2. SEARCH FOR THE PAIRING NAME SEARCH FOR AIWA AMU-120BT WITHIN THE BLUETOOTH DEVICES LIST.
  3. STAY CLOSE… THE EFFECTIVE RANGE OF BLUETOOTH DEVICES IS 10 METERS.
  4. ENJOY THE MUSIC! THE DISPLAY WILL SHOW THE NAME OF YOUR DEVICE WHEN THE CONNECTION HAS BEEN SUCCESSFUL.

USB/SD-CARD MODE

aiwa-AMU-120BT-All-In-One-Amplifier-fig-10

  • CONNECT THE USB/SD CARD AND PLUG THE DESIRED USB OR SD CARD IN THERE ACCORDING TO INPUTS ON THE FRONT PANEL.
  • USB &SD-CARD COMPATIBILITY THIS UNIT IS ONLY cOMPATIBLE WITH THE FAT 16 AND FAT 32 ENCODING FORMATS AND READS DEVICES UP TO 128GB MAX.
  1. SELECT THE USB/SD-CARD MODE USING THE REMOTE CONTROLLER, OR THE INPUT SOURCE BUTTON ON THE FRONT PANEL.
  2. CONTROL THE PLAYBACK USING THE BUTTOwS FOR PLAY/PAUSE, STOP, NEXT, AND PREVIOUS OF THE REMOTE CONTROLLER OR ON THE UNIT’S FRONT PANEL.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals