TFA 60.2025.01 Digital Alarm Clock Instruction Manual
- June 16, 2024
- TFA
Table of Contents
TFA 60.2025.01 Digital Alarm Clock
Product Information
Specifications
- Product Name: Digital Alarm Clock with LED Digits
- Catalog Number: 60.2025.01
- Dimensions: 150mm x 50mm x 65mm
- Temperature Measurement Range: Not specified
- Power Supply: DC 5V, 200mA (power adapter not included), USB cable (included) OR 3 x 1.5V AAA batteries (not included)
- Manufacturer: TFA Dostmann GmbH & Co.KG
- Manufacturer Address: Zum Ottersberg 12, 97877 Wertheim, Germany
- Website: www.tfa-dostmann.de
Product Usage Instructions
Before You Use This Product
Before using this digital alarm clock, please read the instruction manual
carefully and ensure that you understand all the safety precautions and usage
instructions provided.
Delivery Contents
The package should include the following items:
- Digital Alarm Clock with LED Digits
- USB Cable
- Instruction Manual (can be downloaded from here)
Range of Application and Benefits
The digital alarm clock with LED digits is designed for use as a bedside clock. It provides a clear display of the time and also has additional features such as an alarm function and temperature measurement.
For Your Safety
Caution!
This product carries a risk of electrocution. Please follow the safety
precautions provided in the instruction manual to ensure your safety when
using the digital alarm clock.
Digital alarm clock with LED digits
Thank you for choosing this instrument from TFA.
Before you use this product
- Please make sure you read the instruction manual carefully.
- Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
- We shall not be liable for any damage occurring as a result of non-following of these instructions.
- Please pay particular attention to the safety notices!
- Please keep this instruction manual safe for future reference.
Delivery contents
- Digital alarm clock
- DC 5V USB cable
- Instruction manual
Digital alarm clock with LED digits
Range of application and all the benefits of your new instrument at a glance
- LED digits with 2 brightness levels
- Dimming function with automatic timer
- Display of time or indoor temperature, automatic change is adjustable
- Alarm with snooze function (adjustable interval)
- Power supply via DC 5V USB port (cable included)
For your safety
- This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.
- Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of electrocution!
- Connect the device via the USB cable only to a suitable USB power source such as a computer, USB power adapter (DC 5V).
- The device and the USB cable must not come into contact with water or moisture. Only suitable for indoor use.
- Do not use the device if the housing or the USB cable are damaged.
- Keep the device out of reach of persons (including children) who cannot fully appreciate the potential risks of handling electrical equipment.
- Unplug the device if any fault occurs or if the device is not used for a long period of time.
- Route the USB cable lead so that it does not come into contact with sharp-edged or hot objects.
- Keep this devic and the batteries out of reach of children.
- Small parts can be swallowed by children (under three years old).
- Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
- Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
- Low batteries should be changed as soon as possible to prevent damage caused by leaking.
- Never use a combination of old and new batteries together, nor batteries of different types.
- Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact, immediately rinse the affected areas with water and consult a doctor.
Important information on product safety!
- Do not expose the device to extreme temperatures, vibrations or shocks.
- Protect it from moisture!
Elements
A: Display (Fig. 1):
- A 1: Alarm symbol
- A 2 : Time/indoor temperature
- A 3 : PM (12-hour system)
B: Buttons (Fig. 2):
- B 1 : MODE button
- B 2 : ALARM button
Digital alarm clock with LED digits
- B 3 : SNZ/LIGHT button
- B 4 : UP button
- B 5 : DOWN button
C: Housing (Fig. 3):
- C 1: Battery compartment
- C 2 : DC 5V jack
Getting started
- The alarm clock can be operated with the 3 x 1,5 V AAA batteries (not included). The back-up batteries maintain the clock operation in the event of blackout or other power failure. Continuous illumination of the display only works with USB-/mains connection. In pure battery operation, the display is activated briefly each time a button is pressed.
- Open the alarm clock’s battery compartment. Insert three new AAA 1.5 V batteries, polarity as illustrated. Close the battery compartment again.
- For a permanent display light and to save battery life, use the supplied DC 5V USB cabl
- Connect the device to a suitable USB power source, such as a computer, or use a suitable power adapter (not included).
- A beep tone is heard and 00:00 appears on the display.
Settings
- Press and hold the UP or DOWN button in setting mode for fast mode.
- The device will automatically quit the setting mode if no button is pressed for 10 seconds.
Time setting
- Press and hold the MODE button in normal mode for three seconds.
- The hour digit will be flashing. Press the UP or DOWN button to adjust the hours.
- Press the MODE button again and you can adjust the minutes and the 24 – or 12-hour system with the UP or DOWN button.
- Confirm the setting with the MODE button.
Alarm time setting
- Press and hold the ALARM button in normal mode for three seconds.
- 6:00 (default) or the last adjusted alarm time appear on the display.
- AL and the hour digit start blinking. Press the UP or DOWN button to adjust the hours.
- Confirm the setting with the ALARM button.
- Set the minutes in the same way.
- Confirm the setting with the ALARM button.
- 5 (default) or the last adjusted snooze interval appears on the display.
- Press the UP or DOWN button to set the desired time duration (5 to 60 minutes).
- Confirm with the ALARM button.
- To activate and deactivate the alarm function press the ALARM button in normal mode.
- AL appears or disappears on the display.
- When the alarm is activated, the alarm starts to ring when the set alarm time is reached.
- Press any button (except SNZ/LIGHT) and the alarm will stop.
- If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and will be reactivated at the same set time in the following day.
- The alarm symbol remains on the display.
- When the alarm rings, press the SNZ/LIGHT button and the snooze function is activated.
- Once the snooze function is activated, AL will be flashing on the display.
- The alarm will be interrupted for the set time.
Display mode
Each press on the MODE button in normal mode will change the display between:
Time, indoor temperature and automatic dimming function OFF/ON.
Indoor temperature mode
- Select the temperature display by the MODE button.
- Press the DOWN button, to change between °C (default) or °F as temperature unit.
- Press and hold the MODE button, until the device alerts you with a beep, time and date appear in sequence (temperature 5 s -> time 10 s).
- Press and hold the MODE button, until the device alerts you with a beep, to return to the time display.
Automatic dimming mode
- Select the automatic dimming function OFF/ON by pressing the MODE button.
- By default, the automatic dimming function is disabled (OFF).
- To activate (ON) or deactivate (OFF) the function press the UP or DOWN button.
- If the automatically backlight is activated (ON), the weak backlight turns on automatically at 6 pm and switches off again at 6 am.
Time interval setting
- Press and hold the MODE button (display ON) to enter the setting mode for the automatic timer.
- The start time flashes. Press the UP or DOWN button to adjust the hours.
- Confirm the setting with the MODE button and press the UP or DOWN button to set minutes.
- Confirm the setting with the MODE button and set the end time in the same way.
- Confirm the setting with the MODE button.
- If the automatically backlight is activated (ON), the weak backlight turns on automatically for the set time.
Display light
- You can select between two levels of brightness with the UP button.
- Attention: Continuous illumination of the display only works with USB-/mains connection.
- Battery operation: Press any button. The backlight turns on for 10 seconds.
Care and maintenance
Clean the device with a soft damp cloth. Do not use solvents or scouring
agents.
Digital alarm clock with LED digits
- Remove the batteries if the device will not be used for an extended period of time.
- Store the device in a dry place.
Battery replacement
Change the batteries 3 x 1,5 V AAA when the illumination without USB-/mains
connection gets weak.
Troubleshooting
If your device fails to work despite these measures, contact the retailer where you purchased the product.
Waste disposal
This product and its packaging have been manufactured using high-grade
materials and components which can be recycled and reused. This reduces waste
and protects the environment. Dispose of the packaging in an environmentally
friendly manner using the collection systems that have been set up.
Digital alarm clock with LED digits
Disposal of the electrical device
Remove non-permanently installed batteries and rechargeable batteries from the
device and dispose of them separately. This product is labelled in accordance
with the EU Waste Electrical and Electronic Equipment Directive (WEEE). This
product must not be disposed of in ordinary household waste. As a consumer,
you are required to take end-of-life devices to a designated collection point
for the disposal of electrical and electronic equipment, in order to ensure
environmentally-compatible disposal. The return service is free of charge.
Observe the current regulations in place!
Disposal of the batteries
Never dispose of empty batteries and rechargeable batteries with ordinary
household waste. They contain pollutants which, if improperly disposed of, can
harm the environment and human health. As a consumer, you are required by law
to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the
environment. The return service is free of charge. The symbols for the
contained heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.
Specifications
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, 97877 Wertheim, Germany No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box. www.tfa-dostmann.de
Frequently Asked Questions
What is the power supply for this digital alarm clock?
The digital alarm clock can be powered either by a DC 5V, 200mA power adapter (not included) or 3 x 1.5V AAA batteries (not included).
How can I adjust the alarm time?
To adjust the alarm time, press the MODE button (B1) on the clock's control panel. Use the UP (B4) and DOWN (B5) buttons to set the desired alarm time. Press the MODE button again to confirm the settings.
How do I activate the display backlight?
The display backlight can be activated by briefly pressing any button on the clock's control panel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>