DINI ARCED DFWIECEX BATCH1 Weight Indicator User Manual

DINI ARCED DFWIECEX BATCH1 Weight Indicator User Manual

DFWIECEX BATCH1

www.diniargeo.com

Introduction

Dear Customer,
Thank you for purchasing a DINI ARGEO product.
This document is intended to be read in conjunction with the DFWIEXEX Tecchnical and User Manuals.
This manual describes the configuration of the BATCH1 weighing program; specific for weight and formulation accumulation.
It describes parameters and configurable values while providing practical programming examples, to help the technician while installing the indicator.
It is essential to read and understand this document to operate in the safest way. Carefully follow the instructions for programming the weight transmitter; performing actions not indicated in this manual could compromise the proper functioning of the scale.
The utmost care has been taken in compiling this manual, but reports of any inaccuracies are always welcome. The transmitter is covered by warranty and MUST NOT BE TAMPERED WITH BY THE USER under any circumstances. Any attempt at repair or modification mayexpose the user to electric shock and voids warranty conditions, relieving the Manufacturer from all liability.
Any problem with the product must be reported to the manufacturer or to the retailer where it was purchased.
Always TURN OFF THE POWER SUPPLY before performing installation, maintenance, or repairs.
For any additional information or a specific request, do not hesitate to contact your retailer.
This document has been optimised for printing in A4 format.

About Batch1

DFWIECEX Batch1 provides the following features:

• Mono component loading dosage
• 50 formula database or Mono-formula mode with quick target change
• Dedicated keys for main dosage functions
• Start, pause and reset from keyboard or from remote buttons
• 12 digital outputs for dosage management
• Quick Setup
• Two level password
• Lance control
• 3 stage dosage speed control

Loading dosage:

What are the dosing methods?

– manual dosing: performed by an operator
– automatic dosing: performed automatically by activating appropriate digital outputs

DFWIECEX Buttons

Dosage Process Diagram

The following example shows synchronized dosage outputs:

Program Dosage Menu and Parameters

If the menu is password protected, it is only possible to access it by entering it. Alternatively, you can access a partial setup reserved for diagnostics.

Aanalog Output – Dosage Value

Aanalog Output – Dosage Speed Mode

Program Formula

How to access Formula Menu:

How to activate a Dosage

Dosage Process

Manual Dosage

Automatic Dosage

Operating Messages

This publication, or portions thereof, may not be duplicated without written permission from the Manufacturer. All information herein is based on the data available at the time of publication. The Manufacturer reserves the right to make changes to its products at any time without notice and without incurring any penalty. We therefore recommend that you always check for any updates.
The individual in charge of operating the scale must ensure that all safety regulations in force in the country of use are applied, ensuring that the appliance is used in accordance with the purpose it is intended for and to avoid any danger for the user.
The Manufacturer declines any liability arising from any weighing operation errors.

HEAD OFFICE
Via Della Fisica, 20
41042 Spezzano di Fiorano, Modena – Italy
Tel. +39.0536 843418 – Fax. +39.0536 843521

SERVICE ASSISTANCE
Via Dell’Elettronica, 15
41042 Spezzano di Fiorano, Modena – Italy
Tel. +39.0536 921784 – Fax. +39.0536 926654
www.diniargeo.com

Read More About This Manual & Download PDF:

References

• ask.st
• Dini Argeo - Scales and weighing systems

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>