Woodpecker DP-PRO Flip Stops Owner’s Manual
- June 13, 2024
- WOODPECKER
Table of Contents
Woodpecker DP-PRO Flip Stops
Assembly
- To reverse a Flip Stop for use on the other side of the chuck, remove the Flag Screw, reverse the Flag and re-install it.
- Loosen the Locking Thumbwheel and position the stop approximately where you need it. Tighten the Locking Thumbwheel.
- The precise position of the Flag can be fine-tuned using the Micro-Adjust Thumbwheel.
- The Flag of the Flip Stop should always be on the chuck side of the stop. Stops to the left of the chuck should have the Flag on the right side of the Flip Stop assembly. Stops to the right of the chuck should have the Flag on the left side of the Flip Stop assembly.
- Left of the chuck – Flag is on the right side of the Flip Stop assembly.
- Right of the chuck – Flag is on the left side of the Flip Stop assembly.
PRECISION WOODWORKING TOOLS
Woodpeckers, LLC Strongsville, Ohio · woodpeck.com
© 2022 Woodpeckers, LLC
WARNING! This product can expose you to chemicals, including chromium, which is known to the Slate of California to cause cancer and birth defects or other reproductive ham,. For more information go to www.P65Wamings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>