Pdlux PD-V5-N High Frequency Microwave Sensor User Manual
- June 16, 2024
- Pdlux
Table of Contents
Pdlux PD-V5-N High Frequency Microwave Sensor User Manual
Product Instruction
Application
- Intelligent switch
- Automatic light
- Intruder detect
Feature and advantage
- Low wireless power output
- Low power consumption
- Non-contact detection
- Easy to match with the external circuit
- High anti-jamming ability
- Suit various harsh environment
- Low noise output
Detecting Pattern
PD-V5-N 360° 5.8GHz Microwave Motion Sensor is a C-Band Bi-Static Doppler transceiver modlue .It adopts built-in Resonator Oscillator (CRO) amplificated signal external circuit,It is convenient for the customers to develop various products.
This module is ideally suiable for occupancy sensor in automatic lighting switches.It can also be used for ceiling mount intruder detectors.
According with EN 300440. EN 62479
RED directive – 2014/53/EU
According with FCC Part 15.249 ✓ REACH
According with EN 62321,ROHS directive – 2011/65/EU
According with REACH directive – 1907/2006/EC
Products size
X1: 4.5mm
X2: 5.2mm
X3: customizable
| Parameter | Notes | Min | Typ | Max | Units |
|---|---|---|---|---|---|
| Frequency Setting | 1 | 5.750 | 5.80 | 5.850 | GHz |
| Radiated Power (EIRP) | 1 | 0.18 | 0.20 | 0.22 | mW |
| Received Signal Strength | 2 | 150 | 200 | 300 | μVp-p |
| Supply Voltage | 4.75 | 5.00 | 5.25 | V | |
| Current Consumption | 18.5 | 19 | 19.5 | mA | |
| Operating Temperature | -30 | 25 | 105 | ℃ |
Note1: The radiated emissions is designed to meet FCC and CE rules.
Note2: The Received Signal Strength(RSS) is measured at the total 1 Ways
path loss of 64dB
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Ningbo Pdlux Electronic Technology CO.,Ltd Add: Room 1212, Building B, Ningbo
Chamber of Commerce Building, 588 Tiantong South Road, Ningbo City, Zhejiang
Province Tel: 86-574-83008608(20 lines) Email:
pdlux@pdlux.com Web: www.pdlux-
solution.com
www.pdlux.com
www.pdlux-solution.com
www.pdlux.com Tel: 86-574-83008608
