HF-900 Haze Fogger Hazer

HF-900 Haze Fogger

Specifications:

• Model: HF-900
• Product Type: Haze Fogger Hazer
• ID: 417157 (V7)

General Information

The HF-900 Haze Fogger is a device designed to produce fine haze
by vaporizing fog or hazer fluid. It should only be used as
described in this user manual to avoid personal injury or property
damage.

Symbols and Signal Words

In this document, the following symbols and signal words are
used:

immediate dangerous situation that will result in death or serious
injury if it is not avoided.| Immediate danger
WARNING!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in death or serious injury if
it is not avoided.| Possible danger
CAUTION!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in minor injury if it is not
avoided.| Possible danger
NOTICE!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in material and environmental
damage if it is not avoided.| Possible danger

Safety Instructions

Intended Use

The HF-900 Haze Fogger is intended for the production of fine
haze by vaporizing fog or hazer fluid. It should only be used as
described in this user manual. Any other use or use under different
operating conditions is considered improper and may result in
personal injury or property damage. The manufacturer does not
assume liability for damages resulting from improper use.

This device should only be operated by individuals with
sufficient physical, sensorial, and intellectual abilities and
corresponding knowledge and experience. If used by other persons,
they must be supervised or instructed by someone responsible for
their safety.

Safety

DANGER! Risk of injury and choking hazard for
children! Never leave children unattended near the device.

DANGER! Danger to life due to electric current!
The device contains areas with high voltages. Do not remove any
covers, as there are no user-serviceable parts inside. Do not use
the device if covers, safety equipment, or optical components are
missing or damaged.

Respiratory Problems

CAUTION! Possible respiratory problems due to
fog and hazer fluid! Ensure proper ventilation when operating the
device to avoid respiratory issues. Follow the instructions
provided with the fog or hazer fluid.

Risk of Fire

NOTICE! Risk of fire due to covered vents and
neighboring heat sources! Do not cover the vents of the device or
operate it near other heat sources. This can cause overheating and
potentially lead to a fire. Avoid operating the device near naked
flames.

Unsuitable Ambient Conditions

NOTICE! Damage to the device if operated in
unsuitable ambient conditions! Do not operate the device in
unsuitable ambient conditions that may result in damage to the
device. Refer to the user manual for recommended operating
conditions.

FAQ (Frequently Asked Questions)

Q: Can I use any fog or hazer fluid with the HF-900 Haze

Fogger?

A: The HF-900 Haze Fogger is designed to work with specific fog
or hazer fluids. It is recommended to use the fluids recommended by
the manufacturer to ensure optimal performance and avoid potential
issues.

Q: How do I clean the HF-900 Haze Fogger?

A: Cleaning instructions can be found in the user manual. Follow
the recommended cleaning procedures to maintain the device’s
performance and longevity.

Q: Can I operate the HF-900 Haze Fogger outdoors?

A: The HF-900 Haze Fogger is primarily designed for indoor use.
Operating it outdoors may result in unsatisfactory performance and
potential damage to the device. Refer to the user manual for
recommended operating conditions.

User Manual

HF-900 Haze Fogger
Hazer

Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de
11.12.2023, ID: 417157 (V7)

Table of contents

Table of contents

1 General information………………………………………………………………………………………………………………… 5 1.1 Symbols and signal words………………………………………………………………………………………………… 5
2 Safety instructions……………………………………………………………………………………………………………………. 8 3 Features……………………………………………………………………………………………………………………………………. 12 4 Installation……………………………………………………………………………………………………………………………….. 13 5 Starting up……………………………………………………………………………………………………………………………….. 14 6 Connections and controls……………………………………………………………………………………………………. 16 7 Operating…………………………………………………………………………………………………………………………………. 19
7.1 Manual control…………………………………………………………………………………………………………………. 22 7.2 Operating mode `DMX’…………………………………………………………………………………………………… 23 8 Technical specifications……………………………………………………………………………………………………….. 24 9 Plug and connection assignment………………………………………………………………………………………. 26 10 Troubleshooting…………………………………………………………………………………………………………………….. 28 11 Cleaning……………………………………………………………………………………………………………………………………. 29 12 Protecting the environment……………………………………………………………………………………………….. 31

3 HF-900 Haze Fogger
Hazer

4 HF-900 Haze Fogger Hazer

General information
1 General information
This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future refer- ence. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document. Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de.
1.1 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this document.
5 HF-900 Haze Fogger
Hazer

General information

Signal word DANGER! WARNING! CAUTION! NOTICE!
Warning signs

Meaning
This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in minor injury if it is not avoided.
This combination of symbol and signal word indicates a pos- sible dangerous situation that can result in material and environmental damage if it is not avoided.
Type of danger
Warning ­ high-voltage.
Warning ­ flammable substances.

6 HF-900 Haze Fogger Hazer

Warning signs

General information
Type of danger Warning – slip hazard. Warning ­ harmful or irritating substances. Warning ­ danger zone.

7 HF-900 Haze Fogger
Hazer

Safety instructions

2 Safety instructions

Intended use

This device is intended to be used to produce fine haze by vaporising fog or hazer fluid. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.

Safety

DANGER!
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervi- sion. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with.
DANGER!
Danger to life due to electric current!
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged.

8 HF-900 Haze Fogger Hazer

Safety instructions
DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair. If in doubt, seek advice from a qualified electrician. WARNING! Risk of burns from flammable liquids! The use of flammable liquids in the device may cause severe burns and damage to property. Always use approved fluids. Never fill flammable liquids into the tank of the device. WARNING! Slip hazard due to condensate pools! The haze generated by the hazer can condense on floors and surfaces. People can slip and injure themselves on pools of condensate. Do not point the haze on floors or other surfaces that may be stepped on. Regularly check all floors and other surfaces that can be accessed for slipping hazards. If necessary, remove any pools of condensate. WARNING! Health hazard when handling fog or hazer fluid! Fog and hazer fluids contain glycols. There is a health risk in case of eye contact and if fluid is swallowed. Keep fog and hazer fluids in a safe place and out of the reach of children. Never ingest fog and hazer fluids and avoid contact with eyes. In case of accidental ingestion of or eye contact with fog or hazer fluid: Do not induce vomiting if swallowed. Thoroughly rinse the eyes with water upon contact. Get immediate medical attention.
9 HF-900 Haze Fogger
Hazer

Safety instructions

CAUTION!
Possible respiratory problems due to fog and hazer fluid!
Fog and hazer fluids can cause respiratory problems in case of prolonged exposure and in certain people. Using unsuitable fluids can generate toxic gases. Do not use any fog and hazer fluids other than the ones approved for the device. Any claims for compensation for damages caused by using non- approved fluids are excluded. Do not let the device produce haze in poorly ventilated areas. Do not expose people with health problems (e.g. allergy- related respiratory symptoms, asthma) to artificial haze.
NOTICE!
Risk of fire due to covered vents and neighbouring heat sources!
If the vents of the device are covered or the device is operated in the immediate vicinity of other heat sources, the device can over- heat and burst into flames. Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames.
NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient conditions specified in the “Technical specifications” chapter of this user manual. Avoid operating it in environments with direct sun- light, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature fluctuations. If temperature fluc- tuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately. Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualified specialists at reg- ular intervals to prevent damage due to overheating and other malfunctions.
NOTICE!
Damage to the device due to high voltages!
The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess vol- tages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a residual current circuit breaker (FI). As a precaution, disconnect the device from the power grid when storms are approaching or it the device will not be used for a longer period.

10

HF-900 Haze Fogger Hazer

Safety instructions

NOTICE! Risk of fire due to installation of a wrong fuse! Using fuses of a different type than compatible with the device may cause a fire and seriously damage the device. Only use fuses of the same type. Observe the labelling on the device casing and the information in the “Technical data” chapter.
NOTICE! Possible staining due to plasticiser in rubber feet! The plasticiser contained in the rubber feet of this product may react with the coating of the floor and cause permanent dark stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and the floor.

General information about how to safely operate fog machines and hazers

The device was designed for use in professional event technology and works reliably when used properly. Observe the following information:
n Follow all warnings in these operating instructions. n Never leave the device running without supervision. n The device is not suitable for use in private households or as a child’s toy. n Place the device on a stable, fire- proof basis that is at least twice as large as the device. n Maintain a safety distance of 1 m to flammable materials. n The device is not intended for suspended assembly (the so-called “flying operation”). n During operation, ensure that the visibility in the room does not fall below 2 m so that
everyone in the room can still orient themselves safely. n The fog or haze generated by the device may trigger smoke alarms.

HF-900 Haze Fogger Hazer

11

Features
3 Features

The Stairville HF-900 Haze Fogger combines fog machine and hazer in one unit.
n Control via buttons and display on the device or via DMX n 800 watt heating power n Built-in fan n Heating-up time about 3 minutes n Tank capacity 2 litres

12

HF-900 Haze Fogger Hazer

4 Installation

Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
Place the device on a stable, fire-proof basis that is at least twice as large as the device. The device requires 20 cm clearance at the sides and above. The unit should be installed horizon- tally, a maximum deviation of 15° is allowed.

HF-900 Haze Fogger Hazer

13

Starting up
5 Starting up

Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.

NOTICE! Data transfer errors due to improper wiring! If the DMX connections are wired incorrectly, this can cause errors during the data transfer.
Do not connect the DMX input and output to audio devices, e.g. mixers or ampli- fiers.
Use special DMX cables for the wiring instead of normal microphone cables.

14

HF-900 Haze Fogger Hazer

Connections in DMX mode

Starting up
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 , ¼ W).

HF-900 Haze Fogger Hazer

15

Connections and controls

6 Connections and controls
Front and rear panel

• )

(
‘ & %

DMX 3PIN IN OUT
IN OUT
DMX 5PIN

ON/OFF
USE ONLY WITH A 250 V FUSE

+ ö #

$

, –

16

HF-900 Haze Fogger Hazer

1 [ON/OFF] | mains switch to turn the device on and off 2 IEC chassis plug with fuse holder 3 Liquid level indicator 4 [DMX 5PIN] | 5-pin DMX input socket and 5-pin DMX output socket 5 Locking screws for the mounting bracket 6 [DMX 3PIN] | 3-pin DMX input socket and 3-pin DMX output socket 7 Connection for the supply hose from the fluid container 8 Carrying handle 9 Retaining bracket 10 Slide-in compartment for the fluid container 11 Haze / fog nozzle 12 Adjustable flap for controlling the output angle

Connections and controls

HF-900 Haze Fogger Hazer

17

Connections and controls
Display with function buttons
.

FUNCTION

TIMER

VOLUME PUMP/FAN

0/

13 Display 14 [FUNCTION] | opens the main menu, selecting functions
| increases the output volume or the displayed value
| decreases the output volume or the displayed value [TIMER] | start of timer- controlled operation. After the set waiting time has elapsed, the device emits the fixed haze volume. [VOLUME – PUMP/FAN] | Manual output. The device generates haze when you press the button.
| exit button. Keep this button pressed for one second to turn off the device. 15 Button to switch between hazer and fogger operation

18

HF-900 Haze Fogger Hazer

7 Operating
Filling the unit

Operating
NOTICE! Damage to the device due to the use of unsuitable fog or hazer fluids! For or hazer fluids not approved by the manufacturer may permanently damage the unit. Only use the fog or hazer fluids listed on www.thomann.de and follow their instructions for use. First, make sure the unit is disconnected from the mains. Open the screw-cap of the liquid container and fill in the fluid. Make sure that no fluid is spilled or gets into the device. The easiest way is using a funnel. Fill the fluid container not exceeding the upper limit of the level indicator. Screw the cap firmly back on.

HF-900 Haze Fogger Hazer

19

Operating
Turning the unit on
Operation

NOTICE! Risk of undetected fires in the absence of supervision! There is a general risk of fire when operating the device. If the appliance is left unattended, fires can go undetected and cause great damage. Never operate the device unattended.
Connect the device to the mains and switch the device on with the main switch. The appliance heats up within about three minutes, the status is displayed in percent (0 … 100) on the dis- play of the unit. As soon as the value `HF-900 Machine Ready’ is displayed, the device has reached the required operating temperature and is ready for use.
Operation with an empty fluid container can lead to overheating and permanent damage of the pump. When operating, always ensure that there is sufficient fog fluid in the liquid con- tainer to avoid no-load running.

20

HF-900 Haze Fogger Hazer

Operating mode Turning the unit off

Operating
Fill the machine with the fluid permissible for the desired operating mode: n Stairville FAST-FOG (item no. 209054) n Stairville E-M fluid (item no. 121307) n Stairville E fluid (item no. 105454) n Stairville E-C fluid (item no. 105455) n Stairville E-HD heavy fluid (item no. 105456) n Stairville PHF Pro Haze fluid (item no. 260572) The use of other fluids is not permitted!
Use the red function button to select the desired operating mode HAZE MACHINE’ orFOG MACHINE’ . For hazer operation, the button must not be pressed (button is not lit). For fog machine operation, the button must be pressed (button lit).
Disconnect the device from the mains. Transport the device only when it is completely cooled down. To avoid leaking fluid during transport, you should transport the device only with empty fluid container.

HF-900 Haze Fogger Hazer

21

Operating 7.1 Manual control

Manual control is only possible when the device is not connected via DMX. Disconnect the unplugged device from DMX to control the device manually.
In manual operation, the device functions are controlled by the function buttons of the control panel and the display. Press [FUNCTION] to open the main menu. The display shows Wait Time Set Mode: xx s’ . Use the two arrow buttons to set the waiting time for the timer function in a range of 1 … 600 . Press [FUNCTION] again. The display showsStart Time Set Mode: xx s’ . Use the two arrow but- tons to set the time period during which the device will continuously produce haze after the waiting time of the timer function or after pressing the button [VOLUME] (1 … 600 seconds). Press [FUNCTION] again. The display shows Timer Smoke Volume Out: xx %’ . Use the two arrow buttons to set the haze output volume in a range 1 … 100 %. Press [FUNCTION] again. The display showsFan Adjusting Volume: xxx %’ . Use the two arrow buttons to set the haze output intensity in a range 1 … 100 %.

22

HF-900 Haze Fogger Hazer

Operating

7.2 Operating mode DMX’ As soon as the device is connected via DMX, the operating modeDMX’ is automatically ena- bled. Press [FUNCTION] repeatedly until the display shows `The DMX device address set: 1′ . Use both arrow buttons to select a DMX address in a range from 1 … 510.

DMX functions

Channel 1 2 3

Value

Display

0…255

`PMP xxx %’

0…255

`FAN xxx %’

Operating mode selection

0…127

Hazer operation

128…255

Fogger operation

Function Haze volume 0-100 %, if channel 3 = 0…127 Fan speed 0-100 %, if channel 3 = 0…127

HF-900 Haze Fogger Hazer

23

Technical specifications

8 Technical specifications

Heater power Warm-up time Fluid container capacity Fluid consumption
Fog blast duration, max. Charging time between fog bursts Fog burst reach Input connections
Output connections Power consumption Supply voltage Fuse Degree of protection

800 W

approx. 3 min

2 l

Fog: 30 ml/min @ 100 % Haze: 6.5 ml/min @ 100 %

60 s @ 100 %

6 s

3 m

Power supply

IEC chassis plug C14

DMX control

XLR chassis plug, 3-pin, 5-pin

DMX control

XLR chassis socket, 3-pin, 5-pin

750 W

230 V 50 Hz

5 mm × 20 mm, 5 A, 250 V, fast-acting

IP20

24

HF-900 Haze Fogger Hazer

Dimensions (W × H × D) Weight Ambient conditions
Further information Blast direction Timer remote control ON/ OFF remote control Radio remote control Light effect Battery operation with retaining bracket

Technical specifications

280 mm × 461 mm × 253 mm

10 kg

Temperature range

0 °C…40 °C

Relative humidity

20 %…80 % (non-condensing)

variable yes yes No No No yes

HF-900 Haze Fogger Hazer

25

Plug and connection assignment

9 Plug and connection assignment

Introduction

This chapter will help you select the right cables and plugs to connect your valuable equip- ment so that a perfect light experience is guaranteed.
Please take our tips, because especially in Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit orjust’ a not working light show!

DMX connections

The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug.

Pin Configuration

1

Ground, shielding

2

Signal inverted (DMX­, `cold signal’)

3

Signal (DMX+, `hot signal’)

26

HF-900 Haze Fogger Hazer

DMX connections

Plug and connection assignment

A five-pin XLR socket serves as DMX output, a five-pin XLR plug serves as DMX input. The drawing below and the table show the pin assignment of a matching coupling.

Pin Assignment

1

Ground (shielding)

2

Signal inverted (DMX­, `cold’)

3

Signal (DMX+, `hot’)

4

unused / second connection (DMX­)

5

unused / second connection (DMX+)

HF-900 Haze Fogger Hazer

27

Troubleshooting

10 Troubleshooting
In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting:

Symptom The unit does not work No haze output
No response to the DMX controller
The display shows `Temperature is too HIGH’

Remedy
Check the mains connection and the main fuse. 1. Check the filling level of the fluid. 2. Switch the device off and check the hose that leads into the fluid container for flow. 1. Check the address settings and the DMX polarity. 2. Try to use another DMX controller. 3. Check whether the DMX cables run near or parallel to high-voltage cables that may cause damage or interference to a DMX interface circuit. Please send the device to our Service Center for inspection.

If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de.

28

HF-900 Haze Fogger Hazer

11 Cleaning
Procedure

Cleaning

NOTICE! Possible damages caused by unsuitable cleaning agents Cleaners not approved by the manufacturer may permanently damage the unit.
Only use the cleaning agents listed on www.thomann.de and follow their instruc- tions for use.
Clean the appliance after every 30 operating hours, or if it was not in use for a longer period of time.
1. Make sure that the device is turned off, disconnected from the mains and completely cooled down.
2. Position the unit in a well ventilated place.
3. Insert the suction hose of the device into the bottle containing the cleaning agent.
4. Connect the device to the mains power grid and turn it on with the main switch.
5. Wait until the unit has reached the required operating temperature.
6. Switch the unit to continuous operation and let it produce fog / haze for about 20 sec- onds.
7. Insert the suction hose of the device back into the fluid container and let the device again produce fog / haze for about 20 seconds. This will rinse the lines.
ð The cleaning is completed.

HF-900 Haze Fogger Hazer

29

Cleaning
Fan grids

The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg- ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth.

30

HF-900 Haze Fogger Hazer

Protecting the environment

12 Protecting the environment

Disposal of the packing material

Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging.

Observe the disposal note regarding documentation in France.

HF-900 Haze Fogger Hazer

31

Protecting the environment

Disposal of your old device

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended.
Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility. When disposing of the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste management facility. Proper disposal protects the environment as well as the health of your fellow human beings.
Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal.
You can return your old device to Thomann GmbH at no charge. Check the current conditions on www.thomann.de.
If your old device contains personal data, delete those data before disposing of it.

32

HF-900 Haze Fogger Hazer

Notes

HF-900 Haze Fogger Hazer

33

Notes

34

HF-900 Haze Fogger Hazer

Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

References

• Buy musical instruments online from the market leader – Thomann United States

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>