SMITH NOBLE AMPSNHUBFV1 Smart Hub User Guide
- June 16, 2024
- SMITH NOBLE
Table of Contents
SMITH NOBLE AMPSNHUBFV1 Smart Hub
Product Information
Specifications
- Model: DD7006F
FAQ
- Q: What is the FCC RF Radiation Exposure Statement?
- A: The FCC RF Radiation Exposure Statement is a regulatory requirement that states the product’s compliance with the Federal Communications Commission’s guidelines for radio frequency (RF) radiation exposure.
Product Usage Instructions
Step 1: Unboxing and Setup
- Open the product packaging and carefully remove all the contents.
- Find the user manual and read it thoroughly before proceeding.
- Inspect the product for any visible damage. If you notice any damage, contact customer support immediately.
- Locate the power cord and connect it to the appropriate power source.
- Turn on the device using the power button or switch.
Step 2: Product Configuration
- Follow the on-screen instructions to set up the initial configuration of the product.
- Connect the product to your Wi-Fi network by entering your network credentials.
- Configure any additional settings or preferences according to your needs.
Step 3: Product Operation
- Ensure that the product is placed on a stable surface and is not obstructed by any objects.
- Refer to the user manual for specific instructions on using various features and functions.
- Use the provided remote control or control panel to navigate through menus and options.
- Adjust volume, brightness, and other settings as desired.
Step 4: Maintenance and Care
- Regularly clean the product using a soft, lint-free cloth to remove dust and fingerprints.
- Avoid using harsh chemicals or abrasive materials that may damage the product’s surface.
- Keep the product away from extreme temperatures, moisture, and direct sunlight.
- Refer to the user manual for any specific maintenance instructions or recommendations.
Smith & Noble Smart Hub allows the user to link their motorized Shades, Blinds, and Draperies, into a Wi-Fi network, enabling Smart App control and interaction with other loT products and Third Party integration.
Product Information
Step 1
- Please scan the QR code below to download the Smith & Noble 3.0 Mobile App for motorized window coverings.
Step 2
- Please scan the QR code below to learn more about linking the Smith & Noble Smart Hub with your home Wi-Fi router, setting up the Smith & Noble App, and establishing a connection with other loT applications.
3rd Party Integration programs are available
SPECIFICATIONS
- Input Voltage: USB Type C
- Input Power: 1000mA
- Network: Wi-Fi 2.4Ghz only (802.1 1b/n/g) Ethernet
- Shade Control Frequency: 433.92 Mhz
- Range: IP20
- Protection Class: IP20
- Operating Temp: 32ºF to 104ºF (0°C to 40°C)
- Integration: Wi-Fi and Ethernet
Pairing & Programming
Status Indicator
FCC STATEMENT
Declarations
U.S. Radio Frequency FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ISED RSS Warning
This device complies with the Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Radiation Exposure Statement
- This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.
Product Certification
Documents / Resources
|
SMITH NOBLE AMPSNHUBFV1 Smart
Hub
[pdf] User Guide
AMPSNHUBFV1 Smart Hub, AMPSNHUBFV1, Smart Hub, Hub
---|---