BiQiO T02 Wireless Charger User Manual
- June 16, 2024
- BiQiO
Table of Contents
BiQiO T02 Wireless Charger User Manual
Thank you for your purchasing and using of this product This product is a wireless charger with wireless charging and wired charging function, Elegant appearance easy installation, intelligent motherboard, intelligent charging, plug and play, perfect compatibility of 98% digital electronic products on the market, such as MP3.MP4, Cellphone, IPHONEIPADGPSPSP Bluetooth, Digital camera and so on. This product is mostly installed on worktables or desks, and can be used in offices or at home, that is, charging at any time and keeping the table clear
1.Appearance
2.Packaging
Wireless charger (1)
Product Use instructions (1)
3.Specification
Input：5V2.0A/9V1.66A/12V1.25A
USB output：5V3.0A/9V 3.0A/12V3.0A
Type-c output：5V2A
Wireiess charging output：5W/7.5W/10W/15W
Weight：net weight 74g gross weight 82.5g
Size：d=75mm(Max) d=60mm(Min) t=23mr
4. Functional description
Connect the charger to the power supply. At this time, The blue licht on the USB port and Type-C charging port of the charger will licht up, indicating that it can be used for charging (1) Use this charger wireless charging function, pls confirm your device support wireless charging first Charging Device via wireless, pls just put the device on the wireless charging area (Figure 1),a wireloss charging valid distance is just 2-6mm so if the cellphone or otection case is over 6mm, pls take off the phone protectio case before using wireless charging function. During wireless charging, the USB port indicator light will turn red.(Note: This product supports wireless fast charging stye (ie 10W/15W styles), and it needs to be connected to an adapter of QC3.0 or higher to realize the fast charging function.)
(2) Use the USB port/Type-C charging port charging function to charge the device Select the USB/Type-C charging cable that matches the dovice to be chargod, and connect the charger with the charging cable The USB output port/TypeC output port and the device to be charged can realize wired chiarging. as shown in Figure 2.
5.Attentions
- This product does not have waterproof function. lt is strictly prohibited to clean the charger with wet cloth ar in water, so as not to cause leakage, short circuit or other faults. When the USB output is not used, please turn the upper cover to coverthe USB port
- Please do not make this product short circult on purpose, self disassemble or throw it into the fire, to avoid the accident caused by equipment on fire or burst
- Please do not expose goods to sunlight or damp or rainwater for a long time. At the same time, and avoid using in such environment.
- Please do not use goods the closed environment, to avoid bad heat dissipation cause the charger and cell phone to be perm, reduce the life of the charger and cell phone will be shortened , cause the damage, even the risk of smoke and fire. if there are abnormal smell, hot, deformed and abnormal conditions during the use of the charger, please stop using it immediately.
- It’s normat phenomenon product and mobile phone will have slght fever during the process of wireless charging.
- Products have been tested will not occur stop charging or overheating during charging.(with the tost such as iphone, Samsung, LG, HTC, etc)
- Please do not pace metal objects in the wireless charging afea.
- it is forbidden to use USB output and wireloss charging at the same time. otherwise it may cause the charging falure or the product abnomnality
- This product requires table with a diameter of 60mm
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/ TV technician for help. FCC
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the FCC radio frequency exposure limits, Human
proximity to the antenna shall not be less than 20cm(8 inches)during normal
operation. That changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>