ALLOY 2AAU7 Leak Sensor Instructions
- June 16, 2024
- ALLOY
Table of Contents
Alloy Leak Sensor+
Safety Instructions v1.1.
IMPORTANT SAFETY INSTRUCTIONS
- Read, keep and follow these instructions.
- Do not install Alloy Leak Sensor+ near water vapor or smoke.
- Do not submerge Alloy Leak Sensor+ and leak detect probe in water.
- Do not attempt to replace battery, it is irreplaceable.
- Do not open Alloy Leak Sensor+.
- Keep away from children.
- Do not expose to open flame – flammable product
- Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
DISPOSING AND RECYCLING YOUR PRODUCT
**** (Waste Electrical & Electronic Equipment) (Applicable in countries with
separate collection systems). This marking on the product, accessories or
literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of
material resources. Household Users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
(Applicable in countries with separate collection systems)
At Alloy Home, LLC we understand and are committed to reducing any impact our
operations and products may have on the environment. To mi ni mize this i mpac
t A lloy Home, LLC des igns and buil ds its products to be as environmentally
friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
DISCLAIMER
Some content and services accessible through this device belong to third
parties and are protected by copyright, patent, trademark and/or other
intellectual property laws. Such content and services are provided solely for
your personal non-commercial use. You may not use any content or services in a
manner that has not been authorised by the content owner or service provider.
Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish,
upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through
this device.
ONE (1) YEAR LIMITED WARRANTY
Alloy Home, LLC warrants this product (the “Product”) against defects in
materials and/or workmanship under normal use for a per iod of ONE (1) YEAR f
rom the date of purchase by the or igi nal purchaser (“Warrant y Per iod”). If
a defec t ar i ses and a vali d c lai m is received within the Warranty
Period, then as your sole remedy (and Alloy Home, LLC’ sole liability), Alloy
Home, LLC will at its option either 1) repair the defect at no charge, using
new or refurbished replacement parts, or 2) replace the Product with a new
product that is functionally equivalent to the original, in each case within
30 days.
Alloy Home, LLC warrants this product (the “Product”) against defects in
materials and/or workmanship under normal use for a period of ONE (1) YEAR
from the date of purchase by the original purchaser (“Warranty Period”). If a
defect arises and a valid claim is received within the Warranty Period, then
as your sole remedy (and Alloy Home’ sole liability), Alloy Home, LLC will at
its option either 1) repair the defect at no charge, using new or refurbished
replacement parts, or 2) replace the Product with a new product that is
functionally equivalent to the original, in each case within 30 days following
receipt of the returned Product. A replacement product or part assumes the
remaining warranty of the original Product. When a Product or par t is
exchanged, any replacement item becomes your property and the replaced Product
or part becomes Alloy Home, LLC’s property. Obtaining Service: To obtain
warranty service, visit https://smartrent.com/contact-support. Please be
prepared to describe the Product that needs service and the nature of the
problem. Any claim under this Limited Warranty must be submitted to Alloy
Home, LLC before the end of the warranty period. Exclusions: This warranty
does not apply to a) damage caused by failure to follow instructions relating
to the Product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, transport, neglect, fire, floods, earthquake or other
external causes; c) damage caused by service per formed by anyone who is not
an author ized representat i ve of A lloy Home, LLC; d) accessories used in
conjunction with a covered Product; e) a Product or par t that has been
modified to alter functionality or capability; f ) items intended to be
periodically replaced by the purchaser during the normal life of the Product,
including, without limitation, batteries, bulbs or cables; g) a Product that
is used commercially or for a commercial purpose, in each case as determined
by Alloy Home LLC.
EXCEPT FOR BODILY INJURY, ALLOY HOME SHALL NOT BE LIABLE FOR (I) ANY LOST
PROFITS, COST OF PROCUREMENT OF SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE FOR
THE PRODUCT, IN EACH CASE WHETHER RESULTING FROM THE USE OF OR INABILITY TO
USE THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, EVEN IF
COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,
SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT
PERMITTED BY APPLICABLE L AW, ALLOY HOME DISCLAIMS ANY AND ALL STATUTORY OR
IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST
HIDDEN OR LATENT DEFECTS. IF ALLOY HOME LLC CANNOT LAWFULLY DISCLAIM STATUTORY
OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH
WARRANTIES SHALL BE LIMITED IN DURATION TO THE WARRANTY PERIOD. SOME STATES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
This warranty gives you specific l egal r ights and you may a lso have other
rights, which vary from country to country. To exercise your rights under this
warranty, please follow the instructions above under the heading “Obtaining
Service”, or contact Alloy Home, LLC, 8665 E. Hartford Drive, Suite 200,
Scottsdale, AZ 85255.
Alloy Home, LLC is a registered trademark of Alloy Home, LLC.
Manufacturer / Importer: Tri plus grupa d.o.o. Banjavciceva 11, 10000 Zagreb,
Croatia
**** FCC CAUTION
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter.
FCC ID: 2AAU7-ALSP
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the deale r or an experienced radi o/TV techn ician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
**** We, Tri plus grupa d.o.o., Banjavciceva 11, 10000 Zagreb, Croatia,
declare that the product Alloy Leak Sensor+ is in compliance with all the
technical regulations applicable to the product within the scope of Council
Directives 2014/53/ EU.
Manufacturer’s Name: Tri plus grupa d.o.o.
Address: Banjavciceva 11, 10000 Zagreb, Croatia
Product name: Alloy Leak Sensor+
Models: als+.zw8eu
Operating Temperature: -10° C to 40° C
Tri plus grupa d.o.o. hereby declares that this Smart device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU.
EU Declaration of Conformity
We, Tri plus grupa d.o.o. (Banjavciceva 11, 10000 Zagreb, Croatia) hereby
declare that this device is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU. According to Article 10(2)
of Directive 2014/53/EU, Alloy Leak Sensor+ can be used in Europe without
restriction. The full text of the EU declaration DOC is available at the
following: smartrent.com/hardware/docs.
IC: 11391A-ALSP
IC Caution
-
This device contains license-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: -
This device may not cause interference.
-
This device must accept any inter ference, including inter ference that may cause undesired operation of the device.
SPECIFICATIONS
MODEL NUMBER
a l s+.z w8us
RADIO PROTOCOL
Z-Wave™ 800
Z-Wave™ Plus
POWER SUPPLY
CR-2/3
OPERATING
TEMPERATURE
-10°C TO +40°C
RADIO FREQUENCY
908.40MHZ~916.00MHZ – US
868.4MHZ~869.5 916.00MHZ – EU
RANGE
Up to 45m (147 ft) indoors
(depending on the building structure), and up to 60m (196 ft) outdoors.
DIMENSIONS
63X63mm
2.48×2.48 inch
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>