dflp 2020455003 Stay Long Indoor Wall Light Instructions
- June 16, 2024
- dflp
Table of Contents
dflp 2020455003 Stay Long Indoor Wall Light
Mounting instruction
Instructions
IP20: The lamp should only be installed in areas where direct contact with water cannot occur
Class II: The lamp is double-insulated and does not need to be connected to the yellow/green earth wire.
Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
Do not exceed the maximum wattage. The mounting instruction must not be discarded.
Disposal
Disposal of waste equipment by users in private households in the European
Union. This symbol indicates that this product must not be disposed of with
your other household waste. Electrical and electronic equipment contain
substances which may cause damage
to human health and environment if not recycled correctly. It is your
responsibility to hand over to a designated collection point for recycling of
waste electrical and electronic equipment. When handing over for correct
recycling you help to prevent these products straining nature and environment
unnecessarily and to protect human health. For more information regarding
correct disposal, please contact your local city purchased this product.
General maintenance
Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass,justas the thickness of the glass may vary. This is to be seen as anatural consequence of the manual process, and is what gives Mouth- blowng lassits character and organic look.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>