CINONEKO 15 Channel Remote Control for Motorized Window Shades User Guide
- June 16, 2024
- CINONEKO
Table of Contents
CINONEKO 15 Channel Remote Control for Motorized Window Shades User Guide
Motor
Remote
**Front
Back
**
AC2000-01A 1-Channel remote
AC2000-15A 15-Channel remote
AC2000-015 1-Channel remote
AC2000-158 15-Channel remote
Quick Matching
Please refer to the manual according to the purchased remote control model.
Step 1
Make sure the motor is energized Select the channel you want to match single
channel remote control doesn’t need to select
Step 2
Hold the M key of the shades for two seconds, and the motor of the shades
rotate forwards and the backwards once to active.
Step 3
Hold the 5 key of the remote for two seconds, and the motor of the shades
rotates forwards and backwards once to indicate that the nimble and the shades
are linked.
Step 4
Use the up button on the front of the remote to set the highest upper position
to a proper position, and then press pause button to stop Hold the upward
arrow on the back of the remote for 2 seconds, and the motor rotaten once to
look the position of the highest per position:
Step 5
Lise the down button on the front of the remote to set the lowest bottom
position to a proper position, and then press pause button to stop Heid the
down arrow on the back of the remote for 2 seconds, and the motor rotates once
to lock the position of the lowest bottom position
In admin mode, you can switch between inching operation and continuous operation, to adjust the shades more accurately
Press once, the shades will be in inching operation. Press twice, the shades will be in continuous operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>