BURG WACHTER BWFC-261KDIA, BWFC-261KBIA Camera Installation Guide

BURG WACHTER BWFC-261KDIA, BWFC-261KBIA Camera

Items included in the delivery:

• 1x Camera
• 1x Hexagonal wrench
• 1x Set screws and rawlplugs
• 1x Mounting drawing paper
• 1x Quick installation guide and security note

Special features

•  Full HD 1080p Video Stream

•  Royal Night+ Excellent image quality, even under poor light
  Conditions

• Easy to install

•  Easy to use

•  Supports four video technologies

•  5x optical zoom (2,7~13,5mm)

•  12Vdc power output, max. 2W

 Technical drawing

All dimensions in mm. Drawings not true to scale. Subject to technical changes. Errors excepted.

Installation

 optional Accessories

 Technical drawing

All dimensions in mm [inch]. Drawings not true to scale. Subject to technical changes. Errors excepted.

Accessories

 Connectors

Connectors

1.  Power Input Port =12Vdc/~24Vac
2. BNC Video Output Port
3. Audio Input
4. Power Output =12Vdc, max. 2W
5. DIP Switch for video signal

Video setup

**Technical specifications**

Note: The range of the built-in IR-LEDs strongly depend on the location and the surroundings. Strongly absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt) may lead to a considerable reduction of the maximum range.
Subject to technical changes without notice. Errors excepted.
In the case of techn. changes check the latest version on our homepage.

 Technical specifications

Note: The range of the built-in IR-LEDs strongly depend on the location and the surroundings. Strongly absorbent surfaces, e.g. dark, rough structures (floor, lawn or asphalt) may lead to a considerable reduction of the maximum range.
Subject to technical changes without notice. Errors excepted.
In the case of techn. changes check the latest version on our homepage.

OSD menu setup by recorder

OSD menu (e.g. CVI):
Use the recorder to do camera setup.
You can open the OSD by following the steps:

1. Connect the camera to recording system
2. Do right click with mouse on cameras window
3.  Select PTZ
   

Note: Pending on firmware version the menu can be different

General safety precautions and safety instructions

Safety instructions

•  Before operating the appliance, please read this manual carefully and retain it for further reference.

•  Before cleaning the appliance, it has to be switched off and unplugged from the power outlet. Wipe the appliance with a soft damp cloth.
  Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced.

•  Do not use attachments unless recommended by the manufacturer as they may affect the functionality of the appliance and result in the risk of fire, electric shock or injury.

•  Never install the appliance in areas exposed to water or other liquids.

•  The appliance has to be installed in a safe and stable location which is able to carry the weight of the appliance. Quick stops, excessive force, and uneven surfaces may cause the appliance to fall causing serious injury to persons and damage to objects.

•  Openings in the appliance, if any, are provided for ventilation to ensure reliable operation of the appliance and to protect if from overheating. These openings must not be covered or blocked. Please make sure that the appliance does not overheat.

•  The appliance should only be operated from the type of power source indicated on the marking label. If you are not sure of the type of power supplied at the installation location, please contact your local dealer.

•  An appliance which is powered through a polarized plug (a plug with one blade wider than the other) will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug into the outlet, try reversing the plug. Do not defeat the safety purpose of the polarized plug.

•  If the appliance is powered through a grounding-type plug, the plug will only fit into a grounding-type power outlet. This is a safety feature. If your outlet does not have the grounding plug receptacle, contact your local electrician.

•  Route power cords and cables in a manner to protect them from damage by being walked on or pinched by items places upon or against them.

•  For protection of the appliance during a lightning storm or when it is left unattended and unused for a longer period, unplug the appliance from the wall outlet. Disconnect any antennas or cable systems that may be connected to the appliance. This will prevent damage to the appliance due to lightning or power-line surges.

•  Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

• Never insert items into the openings of the appliance. They may touch parts under electric current which may cause an electric shock.

•  Never pour any liquids over the appliance.

•  In case of any operating interruption or a complete operating failure please switch off the appliance and disconnect it from the wall outlet. Never attempt to service or repair the appliance yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

•  When replacement parts are required, be sure that the service technician uses replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

• Upon completion of any service or repairs to the appliance, ask the service technician to perform safety checks to verify that the appliance is in proper operating condition.

•  The appliance must only be installed by qualified service personnel and has to comply with local specifications and regulations.

•  Never point the camera at an object with a high degree of luminance. Bright vertical or horizontal lines can result in a distortion (outshine) of the entire image on the monitor. This artifact is not an error but a particularity of semiconductor CCDs when they are directly exposed to a powerful light source.

• At the installation site, the camera has to be adjusted to the given light conditions (see OSD).

•  Please respect the local legal regulations on waste if you need to dispose of discarded appliances.

• This symbol means that electrical appliances need to be disposed of properly and not simply with unsorted household refuse. Please respect local regulations on waste disposal.

• For cameras equipped with IR LEDs:

Please make sure to always keep a distance of > 1m to avoid damages to your health. Never look directly into the IR-LEDs – this may cause eye damages!

CE compliance
Attention: Any changes or modifications to this appliance which have not been explicitly approved of by the respective regulatory authority, may lead to a prohibition of usage of this appliance. This appliance complies with the CE guidelines.

Notes

• Please respect the local legal regulations on waste if you need to dispose of discarded appliances.

This symbol means that electrical appliances need to be disposed of properly and not simply with unsorted household refuse. Please respect local regulations on waste disposal.

Copyright
All rights reserved. This publication may not be reproduced, stored in a retrieval system or transmitted, in any form or by any means (electronic, mechanical, photocopying, recording or otherwise), without the written prior permission of BURG-GUARD GMBH. No reproduction of any part or excerpts thereof are permitted.
Errors excepted. Specifications are subject to change without notice for quality improvement. SANTEC is a registered trademark of BURG-GUARD GMBH. All other companies or products mentioned in this publication are trademarks, registered trademarks or brands of the respective company.
© Copyright: BURG-GUARD GMBH
Wormgermühle
58540 Meinerzhagen
Germany
www.santec-video.com

References

• BURG-WÄCHTER | BURG-GUARD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>