CINONEKO K230 Pro 15 Channel Remote Control for Motorized Window Shades Installation Guide

Installation Instructions

K230 Pro 15 Channel Remote Control for Motorized Window Shades

K230 Pro Motorized Cellular Shades
K230 Pro Motorized Blinds This manual contains motorized blinds and motorized cellular shades, hereinafter collectively referred to as shades, if there is no separate specific to which type, this function is suitable for both kinds of shades at the same time and the same method of operation; Other individual functions shall be subject to the manual.

Details of Parts Included in Package

Battery Installation

1. Put the battery to the rail slot.
2. The battery bar will be attached automatically to the magnetic buckle to complete docking.

Charge The Battery

1. External charging
   Take down the lithium battery bar and charge. Beware of battery fallingCharge the battery with the USB cable

2. Charging with Solar Panel
   (Optional,Not Included)
   When the battery and solar panel are installed at the back of the top rail, please leave at least 4″ space for them.

No Drill Inside Mount
No Tools-No Drill design allow it no need to drill any holes in your window frame, easy to install

| W ≤ 1/4
---|---
| 1/4 ＜ W ≤ 1/2
| 1/2 ＜ W ≤ 1

Front Installation Of The Battery

Push the shades to the left and press against the wall.
Push up the right end of the shades and put them into the window frame.Turn the safety lock rightwards until tighten itAttach the battery to the moter in the front

Back Installation Of The Battery Install the battery to the back of the top rail.Make sure the depth of window frame is at least 4″. Push the shades to the left and pressed against the wall.
Push up the right end of the shades and put them into the window frame.Turn the safety lock rightwards until tighten it

Drill Inside Mount Front Installation Of The Battery Choose appropriate spots of the two brackets and mark them with a pencil,using pencil marks as a guide.
(We suggest marking at 1/3 and 2/3 of the total length of the shades.) Tilt the shades and push to fit in the brackets. Attach the battery to the moter in the front

Back Installation Of The Battery Install the battery to the back of the top rail.Make sure the depth of window frame is at least 4″.Choose appropriate spots of the two brackets and mark them with a pencil,using pencil marks as a guide.
(We suggest marking at 1/3 and 2/3 of the total length of the shades.)Tilt the shades and push to fit in the brackets.We provide 3 widths of the extension blocks.
NOTICE: Do not paste two expansion blocks together for use.

NOTICE
Please read the installation instructions carefully to familiarize yourself with safe and effective usage before use. In addition, keep the installation instructions handy when using the product.
The brackets and screws apply to the wooden window frames, plasterboard walls and concrete walls, but they cannot be installed onto the window frames or ceiling which are not made up of wood, plasterboard and concrete.
Please check the materials and hardness of the window frames or ceiling before installation.
Make sure to comply with the quantity of brackets and installation location required in the installation instructions when installing the products. Improper installation could cause the shades dropping and bring damage to health or property.
Please do not hang any items on the product or pull the product roughly or fiercely.
The product is only suitable for indoor use and not for outdoor use.
Please do not use the product in a high heat or humid environment (such as saunas or furnace), or near an open flame.
Please close the window or push the shades up during high winds, otherwise the strong winds could cause the damage to the product or an accident.
Please do not place any items which can interfere with operating the shades within a range of moving up and down.

Function Key Description

Please refer to the manual according to the purchased remote control model.

Motor Remote

The shades have been adjusted to the best condition before delivery, so they do not need to be adjusted again. If you want to adjust, please refer to the following advanced setting functions.

Quick Matching

Please refer to the manual according to the purchased remote control model.

Swtich the remote to “admin” state.
Step 1
Make sure the motor is energized.
Select the channel you want to match.
(single channel remote control doesn’t need to select.) Step 2
Hold the M key of the shades for two seconds, and the motor of the shades rotate forwards and backwards once to active; Step 3
Hold the S key of the remote for two seconds, and the motor of the shades rotates forwards and backwards once to indicate that the remote and the shades are linked; Step 4
Use the up button on the front of the remote to set the highest upper position to a proper position, and then press pause button to stop.Hold the upward arrow on the back of the remote for 2 seconds, and the motor rotates once to lock the position of the highest upper position ; Step 5
Use the down button on the front of the remote to set the lowest bottom position to a proper position, and then press pause button to stop.Hold the down arrow on the back of the remote for 2 seconds, and the motor rotates once to lock the position of the lowest bottom position.” In admin mode, you can switch between inching operation and continuous operation, to adjust the shades more accurately . Press once,the shades will be in inching operation.
Press twice,the shades will be in continuous operation.

Advanced Settings

Please refer to the manual according to the purchased remote control model.

“admin”mode
Remote channel shows slow flash

1. Motor reversing
   The running direction of the shades is oppsite to what shows on the remote button.
   Method 1 Press both together until the motor rotates onceMethod 2 Press M key 10” motor rotates three times

2. Delete remote matches
   (1) Select the switch to “admin” mode
   (2) Press “S” 5 times, motor rotates once.The match is deleted.

“user”mode
In user mode,you can operate and use this product normally without worrying about any misoperation to the motor.
Add a new remotes
A motor can match one or more remotes remotes need to be matched. See“remote quick matching” There’s a quick way to copy it

1. Select the switch to “user” mode

2. Operate the matached remote (remote 1).
   (Select the channel you want to copy.)
   Press”S” 1 time, motor rotates once
   Press”S” 1 time again, motor rotates once

3. Operate the remote 2 (new one) to be added.
   (Select the channel you want to add)
   Press”S” 1 time, motor rotates once Copy complete.

Pairing channel

Please refer to the manual according to the purchased remote control model.
One channel of a remote controls one motor, and 15 channels control up to 15 motors.For example, the 15 channel remote is only used 1-5 channels, the rest of 6-15 channels are not used and can be hidden without display

1. The remote shows the channels.Press and hold two channel switch keys at the same time. And the remote shows “L” at first, and then shows “15”. Release the keys.
2. Use channel switch button to select the channels which have to be reserved,from channel 1.
3. use the “pause” key to confirm the channels to be reserved.

Reserved channels can only be counted from channel 1. For example, 1-5. No support for 3-7. Repeat the operation to adjust the final required number of channels.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>