Red Earth Saunas SCSS0010 Bluetooth Connection Sauna Controller Instruction Manual
- September 24, 2024
- Red Earth Saunas
Table of Contents
SCSS0010 Bluetooth Connection Sauna Controller
“`html
Specifications:
- Product: Infrared Sauna
- Usage: Promotes a healthy lifestyle
- Safety: Refer to the important safety guides section for
precautions
Product Usage Instructions:
1. Installation Process:
Follow the installation process outlined in the manual based on
the structure of the sauna model you have. Ensure all components
are correctly assembled.
2. Safety Precautions:
-
Children should always use the sauna under adult
supervision. -
Avoid inserting objects into the heating tube plate.
-
Avoid pouring water on the equipment or heating pipe.
-
Keep flammable substances away from the sauna.
-
Do not place items inside or on top of the sauna.
-
Avoid touching electrical components with wet hands.
-
Avoid using the sauna during thunderstorms.
-
Avoid tilting or striking the equipment with sharp
objects. -
Allow the sauna to rest after 4 hours of continuous
operation. -
Avoid operating the sauna in high-temperature environments for
extended periods. -
Use caution after consuming alcohol.
-
Avoid use if prone to bleeding or certain medical
conditions. -
Consult a doctor before using if unwell or taking
medication. -
Wait for body temperature to normalize after intense exercise
before using. -
Stop using immediately if any discomfort is felt.
-
Be cautious entering and exiting the sauna to avoid hitting
your head.
3. Maintenance:
Regularly clean the sauna and ensure all components are
functioning properly. Refer to the maintenance section in the
manual for detailed instructions.
4. Trouble Shooting:
If you encounter any issues with the sauna, refer to the
troubleshooting section in the manual for guidance on resolving
common problems.
FAQ:
Q: Can I use bath products in the sauna?
A: No, it is advised not to use any bath products inside the
sauna to prevent damage and maintain its functionality.
Q: Can I sleep inside the sauna while it’s working?
A: No, it is not safe to sleep inside the sauna while it’s
operational. Always use the sauna responsibly and follow safety
guidelines.
“`
Infrared Sauna
Operating instruction
Infrared makes life more healthy
Due to our continued product improvement, product illustrated on this
instruction manual may vary slightly from the actual product.
Contents
Warning ……………………………………… 1 Important safety guides ……………………… 2 Structure of
infrared sauna …………………… 3 Installation process …………………………… 4 Installation
precautions ……………………… 5 Control panel operation ……………………… 7 Control box
…………………………………… 8 Maintenance ………………………………… 9 Trouble shooting ……………………………… 10
Warning
1aThe appliance is to be continuously attended 2aThe sauna room or cabin is to
be inspected before setting the appliance to a standby mode for a delayed
start. 3aCleaning with steam cleaners, high pressure cleaners and spraying
water is not allowed. 4ait is recommended that the infrared cabin should not
be used within 24 h after UV radiation exposure from artificial sources or
sun-bathing; 5aindividuals who may be at risk from hyperthermia, such as
individuals suffering from cardiovascular disease, should seek medical advice
before use of infrared warming cabins; 6awhen persistent erythema (reddening
of the skin lasting more than a day) and netlike colour changes persist after
regular exposure to infrared radiation, exposure should not be repeated and
medical advice should be sought to prevent development of erythema ab igne;
7aif you are a person with compromised heat pain sensation or under the
influence of alcohol or tranquilizers you should not use infrared warming
cabins. 8aa pilot lamp showing that the heater or infrared emitter is switched
on is to be installed in the attendant’s room. 9aThis appliance is not
intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance. 10aIf the
supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
1
Important safety guides
Please strictly follow safety precautions when using!
1. Children must be using the equipment under the care of an adult. For
safety, do not play with it
2. Do not insert objects such as fingers or sticks into the heating tube
plate to prevent danger
3. Never pour water to the equipment or the heating pipe (board) 4. Do not
use or store flammable gas or liquid such as hair spray,
oil paint, gasoline, etc near the equipment to avoid fire 5. Do not place
items inside or on top of the sauna 6. Do not touch the power control panel
and any electrical
components with wet hands to prevent electric shock 7. It is forbidden to use
the equipment during thunderstorms
to prevent electric shock 8. Do not tilt the equipment, do not use sharp
objects to strike 9. Shut down the equipment for half an hour after 4 hours
continuous working 10. Do not operate the equipment in a long-term high
temperature
environment 11. Use with caution after drinking alcohol 12. Those who have
hemophilia or are prone to bleeding should
avoid using it 13. Please consult your doctor before using if you are in
period of
disease and taking medicine 14. Do not use after intense exercise, wait until
the body
temperature returns to normal before using 15. If you feel any discomfort,
please stop using immediately 16. Mind your head when get in and out of the
equipment 17. Do not sleep inside the equipment when it is working 18. Do not
use any bath products in the sauna 19. To avoid burns, do not touch the
heating element 20. WARNING:Covering the heater or infrared emitter causes
fire risk! 21. If you have any questions, please call the supplier.
2
Structure of infrared sauna
1
10
2
11
12 3
4
13
5
14
6
15
7
16
17 8
18
9 19
1 Duster cover 2 Speaker 3 Control box 4 Left board 5 Control panel
6 Front board 7 Handle 8 Door glass 9 Hinge 10 Ventilation
11 Temperature sensor 12 Top board 13 Back board 14 Heater frame 15 Right board
16 Bench 17 Bench front board 18 Bottom board 19 Foot rest board
Attention: 1The minimum distance between the top of an infrared emitter and the ceiling of the cabinis 100 mm; 2The minimum distance between the bottom of an infrared emitter and the floor of the cabin is 40 mm, unless this distance is determined by the construction of the intrared emitter; 3.The minimum horizontal distance between an infrared emitter and any combustible material of the cabin is 5 mm, unless these distances are determined by the construction of the infrared emitter; 4.The minimum distance between adjacent infrared emitters is 5 mm.
3
Installation process
Bottom board
Back board
Left board
Right board
Bench front board
Bench
Foot rest board
Front board
Top board
- The structure may vary from different models.Due to our continued product improvement, product illustrated on this instruction manual may vary slightly from the actual product.
4
Installation precautions
Suitable for processes 3 and 4 Installation method of the left
and right side panels
Large plate assembly
Suitable for process 8 Installation method of
the front board 5
Installation precautions
Electrical connection
The product is connected to the main power supply through the cable. the brown
core of the cable is connected to the live wire of the main power supply, the
blue core is connected to the neutral wire of the main power supply, and the
yellow green core is connected to the ground wire of the main power supply
1
2
Conection cable
Connection plug
6
Control panel operation
1
6 2
7
3
8
4
9
5
1 Temperate display screen
For temperate.
2 Timer display screen
For timer.
3 USB function
Touch this key to start USB function.
4 Light button
Touch the key to turn on/off the light See the next page for details.
5 Power button
Press and hold this button to switch on and off.
6 Temp control
After heater is turned on, press TEMP- and TEMP+ to adjust the heater
temperature. See the next page for details.
7 Time control
Touch the +’and-` buttons to set the timer from 5 to 60 minutes. Stepping
is 5, when the countdown is to 5 minutes, it will beep 3 times.
8 Audio function
See the next page for details.
9 Button lock function
Long press LOCK button for 5S, indicator light is on, it means the button is
locked. Long press this button again for 5S to unlock the button, indicator
lamp is not light.
7
L A M P A
B C D E F
D A O L
D A O L
D A O L
D A O L
D A O L
D A O L
Control box
PMAL
ABC
LOAD
LOAD
LOAD
D E F
LOAD
LOAD
5
O C P L N AC POWER
4 1 3 2
This control box is the control center of sauna room,it is installed on the top board,input/output connections as below.
1 Main power of sauna room. 2 Lamp power output cable 3 Heaters power output cableLOAD A–LOAD F) 4 Fuse reset
5 12V output
Temperature sensor connection port Control panel connecting Antenna USB output
Color lamp power output Audio output
8
Maintance
Before using After using Stain on wood
Stain on glass
Transportation and storage
1. Please be sure to follow the instruction manual before operations
2. Prepare a towel on the seat bench to prevent sweat from dripping onto
it.To avoid affecting the quality and beauty of wood.
1. Please unplug the power plug in time 2. Open the door to let the heat and
humid water vapor
dissipate and keep the sauna cabin dry.
1. The outer cabin can be wiped with a wrung wet towel; The inner cabin can
be wiped by small vacuum cleaner
2. Do not use organic solvents to decontaminate, such as gasoline, alcohol,
etc. wipe the sauna surface;
3. Do not use sharp objects in sauna cabin to prevent scratching woods.
1. Wipe the glass with soft paper; 2. Stubborn stains can be wiped with a
damp cloth, then
dry with a dry cloth; 3. Do not scratch the surface with a sharp object to
prevent
scratching the glass.
1. Avoid water, snow and intense impact during the transportation;
2. Do not store it in a humid environment; 3. The northern climate is
relatively dry, often wipe the
product with a wrung wet towel; 4. The climate in the south is relatively
humid and can be
ventilated and dried frequently.
9
Trouble shooting
Number Problems
Possible reasons
Countermeasure
The connector is not connected properly
Check the connector or replace a new one
1
Indicator light for powersupply not working
No power supply input
Chick the circuity ( especially weather there is power supply input)
Indicator light is broken
Replace the circuity panel
The heating indicator light is broken
Replace the relevant control panel
2
Indicator light for function is not working
The circuit board or components are broken
Replace the circuit board
The temperature sensor is broken
Check if the connect is loosen and replace it
The heater is broken
Replace with a new one Of the same specifications
The wire junction or the heater’s wire is loosen
Check and make them tight
3
Infrared Heater not heating up
Check if junction of the
The temperature sensor is broken
temperature sensor is loosen
and replace it
The circuit board of the relay is not work
Replace the circuit board
4
Odor from the sauna
The circuit`s problems
- There is eyewinker around, remove it
2Some heater’s temperature over high,cut off the power supply,replace it. - Parts on the circuity is broken
10
Trouble shooting
Number 1 2 3 4
5 6 7
Problems
Poor display
Controller can’t boot Temperature
display is not normal
Bluetooth is not paired properly
Radio w ithout sound
System alarm
Stop heating
after heating for
a w hile
Possible reasons Digital tube quality problem
Digital tube driv er I C is damaged CPU burned out No pow er input The
controller’s connection is loose
Countermeasure
Replace the display panel
Replace a new CPU Check for pow er Reconnect the control computer cable
Temperature sensor damaged
Replace temperature sensor
Check if other dev ices w ere paired Check if the Bluetooth version is
compatible. The system supports v ersion 2.0 or 4.0. Bluetooth driv er module
is broken
Radio module is broken
Speaker cable is broken or the speaker is broken Motherboard amplifier is
broken The screen displays EO and alarms The screen displays HH and alarms The
screen displays E1 and alarms The system has ov erload, ov ercurrent protector
action
Temperature sensor partial ov erheating
Disconnect the original paired dev ice
Replace the matching v ersion
Replace the four-in-one module Replace the four-in-one audio module Replace
the w ire or replace the speaker Replace the motherboard
Sensor disconnection
Excessiv e temperature
Sensor short circuit First check if there is an open circuit, if no open
circuit, restart current limit protector Check w hy the partial area is ov
erheated
11
FCC Warning This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: –Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver. –Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. –Consult the dealer or an experienced radio/TV
technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To
maintain compliance with FCC’s RF exposure guidelines, the distance must be at
least 20 cm between the radiator and your body, and fully supported by the
operating and installation
Infrared Sauna
Operating instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>