FLEAU HOME 6 in 1 Hot Air Styler User Manual
- June 16, 2024
- FLEAU HOME
Table of Contents
6 in 1 Hot Air Styler
6 in 1
Hot Air Styler
INSTRUCTION FOR USE
HOW TO USE THE ATTACHMENTS
The styling attachment is a spiral comb is for hair curling purpose.
a. Ensure that the sign ” “of the attachment and the sign “ ” of the unit are
in line. Rotating the attachment clockwise until a “click” sound is heard.
b. To remove, press the sign “PUSH ” of the unit and turn the attachment
counterclockwise and pull out it.
c. Blow Brush
d. Roller Brush
For creating beautiful side waves.
- Tension Comb for more effective hair catching capabilities.
- To use the Tension Comb, place the hair firmly into the brush.
Spread your hair on locks and wind then up on round brush. To untwist the
lock, press the button above the operation switch. Do not comb hair right
after a curling, give them preliminary to cool down.
Check the voltage on the handle of the appliance if corresponds to your local
power supply.
- Towel dry your hair thoroughly after washing.
- Plug the power cord into the wall socket.
- Turn on the appliance with the switch D and set the temperature level
- If neccessary, you can interrupt the hot air supply when drying by turning the switch D to “1 ” position (cool air setting).
- After use, switch off the appliance with the D button and pull out power cord from the wall socket.
Never wrap the power cord around the appliance, as this can result in damage.
Check the power cord and the appliance regularly for visible damage.
CHANGING THE STYLING ATTACHMENT
Fit the attachment onto the body of the unit by lining up the guides on the two parts and then press the two together while revolve the comb gently to clockwise direction until you hear a click. To remove the comb, press on the unlocking button located on the sides of the unit and gently pull the attachment off. The styling attachment is a spiral comb for hair curling purpose.
STORAGE SAFETY
When not in use “unplug it.”
Allow the appliance to cool and store it in a dry location. Never wrap the
cord around the appliance since this will cause the cord to wear prematurely
and break. If the supply cord of this appliance becomes damaged the appliance
must be replaced by returning to the retailer from which the product was
purchased or a similarly qualified person in order to avoid a hazard.
PRODUCT CLEANING
- The appliance can be cleaned with a dry cloth.
- The attachments can be cleaned with a moist cloth or rinsed under a running tap. Remove the attachments from the appliance before cleaning. Make sure the attachments are dry before using or storing them.
- Never rinse the appliance with water
SETTINGS TEMPERATURE LEVEL
0: Off
1: Moderate temperature for gentle drying and styling
2: High temperature for fast drying and styling
3: Highest temperature for fast drying and styling
WARRANTY INFORMATION
The manufacturer provides warranty in accordance with the legislation of the
customer’s own country of residence, with a minimum of 1 year (Germany: 2
years), starting from the date on which theappliance is sold to the end user.
The warranty only covers defects in materiall or workmanship.
The repairs under warranty may only be carried out by an authorized service
centre. When making a claim under the warranty, the original bill of purchase
(with purchase date) must be submitted.
The warranty will not apply in cases of:
– Normal wear and tear
– Incorrect use, e.g. overloading of the appliance, use of non-approved
accessories
-Use of force, damage caused by external influences
– Damage caused by non-observance of the user manual, e.g. connection to an
unsuitable mains supply or non-compliance with the installation instructions
– Partially or completely dismantled appliance
TECHNICAL DATA
Power supply: AC110 V ~60 HZ AC220-240V ~ 50/60 HZ
Power: 1000 W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>